Page 1
Thank you for choosing the POD-X1 Jump Starter! Always follow
basic safety precautions when using electrical appliances. Read
all instructions carefully. Please keep this instruction manual for
easy reference.
POD-X1
Page 2
When charging, indicator lights will flash one by one. The number of
solid indicator lights indicates the battery capacity of the POD-X1.
Full indicator lights are solid when charging is completely charged.
the POD-X1
Page 3
the POD-X1:
2. Connect the 12V 1A input port of POD-X1 to the other end of
the home AC outlet.
2. Connect the 12V 1A input port of POD-X1 to the other end of
the car adaptor.
To jump start 12V vehicles
2. Plug the jumper cable’s cord into the jump start socket.
3. Connect the red battery clamp of jumper cable to the vehicle’s
positive (+) battery terminal and connect the black battery clamp
of jumper cable to the vehicle’s negative (-) battery terminal.
4. Start the vehicle
5. When the vehicle starts, remove jumper cable from vehicle battery
terminals within 30 seconds
6. Leave the vehicle’s engine running
Page 4
Charging mobile phone or tablets
5
Page 5
do you turn off the POD-X1?
The POD-X1 will power off automatically when charging is complete
or no power is drawn
How many times can it fully charge my mobile phone?
At least 4 times for the iPhone 4
How long will the POD-X1 take to fully charge my mobile
phone?
How many times can the POD-X1 start the vehicle when fully
charged?
How long will the POD-X1’s charge last?
Problem Cause Remedy
POD-X1 is started.
POD-X1
Page 6
Securely fasten the blue plug into the jump start socket when jumpstarting a
vehicle. If not secured, it will not jump start the vehicle, and will even make the
socket melt.
Check that the battery clamps have a good connection, whether the battery
connector is rusted, dirty if the vehicle can not be started. Jump start again after
cleaning. Do not continue to jump start after 3 unsuccessful attempts, otherwise it
will damage the POD-X1. Check the vehicle for other reasons.
Remove the product from the vehicle within 30 seconds of starting the
vehicle.
together.
Do not dispose the product.
use caution when using the POD-X1.
children, elderly, mentally
challenged persons without supervision.
POD-X1 to become wet.
POD-X1 in water.
POD-X1 in an explosive atmosphere, such as in the
the POD-X1. Only a repair technician may
POD-X1 to heat.
90°F.
40°F and 80°F.
POD-X1.
. In case of skin or eye
contact, rinse immediately with clean water and seek medical attention.
Always discard the battery appliances with due care for our environment.
Page 7
Loading...