PNY Vibe 1GB, Vibe Install Manual
Components
- 5 -
Components
- 4 -
1
VIBE Player
2
Earphone/Necklace
3
Installation CD
4
One AAA Battery
5
Manual
6
USB Cable
Front
Name of Each Part
Components
Components
- 7 -
Components
- 6 -
Side
Back
Open the battery cover by pressing it down on the latch.
Insert a new battery with the correct polarity as shown in the battery cavity.
Replacing the Battery
1 2
3 4
Connecting to the PC
- 9 -
1
Insert the installation CD in the CD-ROM to display the automatic
execution as shown below.
Connecting to the PC
- 8 -
• Minimum PC Specification
• Pentium 133MHz or higher
• Windows 98/ME/2000/XP
• Hard Disk Memory more than 20MB
• CD-ROM Drive
• USB Port
Note
Please make sure your computer systems has the latest version of your
operating system.
2
Click “Setup.Program” to
install the installation
program.
3
Click Next button to see the
privilege contract as shown
below.
Installing the VIBE Software
Connecting to the PC
- 11 -
Connecting to the PC
- 10 -
4
If the user agrees to the privilege contract, click Yes button.
5
Select the folder to install the program, and click Next button.
6
Please wait while the
program is being installed.
7
After installation is completed,
click Finish button.
Note
After installation is completed in Windows 98/ME, the PC
must be rebooted so that the program can function properly.
Loading...