PMD Personal Microderm Instruction Manual

INSTRUCTION MANUAL

REV 6/2015

Warning

Failure to use this product strictly in accordance with

the wrien instrucons and the instruconal video,
including removal of the plasc safety guard during
any use of the product, could result in injury to your
skin, including scabbing.

Do not use this product without first viewing the
instruconal video and following the instrucons

and adhering to the safety warnings explicitly. Do not
operate this product without the safety cap in place
at all mes.

3

WARNINGS

1.

2.

3.

4.

5.

6.

This PMD Personal Microderm is not intended for persons

with reduced physical, sensory or mental capacies unless

supervised by a responsible party.

Users 18 and under must be supervised by an adult.
For indoor use only.

Keep the PMD Personal Microderm dry.

If the power cord or adaptor is damaged it must be replaced
by the manufacturer.

Only use parts or adaptors supplied in package.

Unplug from outlets when finished and when cleaning.

4

INTRODUCTION

The Personal Microderm is a

revoluonary at-home skincare
tool that provides the same
brilliant results as professional,
in-office microdermabrasion
treatments.

By combining the power of
Patented Spinning Disc
Technology and Perfectly
Calibrated Vacuum Sucon, the Personal Microderm works to
remove the dead, dull skin cell barrier, increase blood flow, and
smulate the body’s natural producon of collagen and elasn.

5

GETTING STARTED

Watch the DVD

A DVD has been included with your Personal Microderm.

It contains important informaon and demonstraons to
prepare you in geng the most out of your Personal Microderm

treatments.

Please watch before

you use the product

INSTRUCTIONAL DVD

getpmd.com

6

PREPARING FOR TREATMENT

Thoroughly cleanse the skin. Make sure it is free from all makeup,
dirt and oils. We recommend using the PMD Advanced Soothing

Cleanser, since it is specifically formulated to work with the PMD

device and treatments.

Once the skin is clean, allow it to dry completely before you begin.
A dry skin surface is parcularly important because it allows the
PMD to work properly and effecvely. If the skin is damp or
clammy, the disc will be unable to smoothly glide over it.

7

1 2

CONNECTING THE POWER CORD

Step 1: Connect the power cord to the device.
Step 2: Turn the connector one quarter turn unl it locks in place.

Note: There is no baery for this device. It is designed to run off a

power cord to maintain consistent performance.