Loudspeaker
user-guide
Serial No
Builder
wafer1
™
wafer2
™
Contents
General usage guidelines
Introduction
The approach
Unpacking
Our attention to detail
series installation examples
Connections
control
control -
Using
and
Wall mounting the
Running or breaking in
Suggested associate loudspeakers
Service
Warranty on-line
Warranty certificate - Part 1
Warranty certificate - Part 2
Help us improve - your comments
Specifications
Inspection certificate
30
29
27
25
11
28
26
24
21
20
18
17
16
15
14
13
12
10
9
8
5
user-guide
Product Support
For product support, accessories or servicing advice, please contact a PMC authorised dealer
see www.pmc-speakers.com.
Warranty Certificate
Please take a few moments to complete the warranty card at the back of this booklet or
register at www.pmc-speakers.com. This records the purchase of your loudspeakers and
provides you, the customer an opportunity to make suggestions and provide feedback
directly to PMC.
Company Details
PMC LIMITED
43-45 CRAWLEY GREEN ROAD LUTON LU2 OAA UK
T 0870 4441044 F 0870 4441045
email sales@promonitor.co.uk web www.pmc-speakers.com
PMC USA LLC
17952 SKY PARK CIRCLE Building 45 SUITE A IRVINE CA 92614 USA
T 949 861 3350 F 949 861 3352
email sales@pmc-speakers.us web www.pmc-speakers.com
© 2009 PMC. All rights reserved.
Version 3 - 5662
This document should not be construed as a commitment on the part of PMC. The information it contains is subject to
change without notice. PMC assumes no responsibility for errors that may appear within this document.
CE Conformity PMC passive loudspeakers conform to CE Directive LVD 73/23/EEC and EMC 89/336/EEC.
WEEE European directive - PMC Limited is a member of a National Compliance scheme and have gained the associated
certification of compliance and the following registration number from the Environment Agency WEEE/GJ0101WU
WEEE EU Directive
This symbol on the product or in/on its packaging indicates that this product must not be disposed of with other household
waste.
It is the responsibility of the owner to dispose of waste equipment via a designated collection point for the recycling of waste
electrical and electronic equipment.
The recycling of your waste equipment is an attempt to conserve natural resources and ensures that it is recycled in a
manner that protects human health and the environment. For more infor mation about where you dispose of your waste
equipment for recycling, please contact your local waste/recycling authority or the dealer from whom you purchased the
product.
loudspeaker user-guide
5
General usage guidelines
Read these instructions and keep them in a safe place for further reference.
Heed all electrical safety warnings, including any on the loudspeakers
themselves.
Do not use the loudspeakers near water.
Clean only with a dry, lint-free, cloth.
Do not install near any heat sources such as radiators, ovens or other
equipment that produce excessive heat.
High volume audio signals, however short their duration, have the potential to
cause hearing damage. Use care when setting the system volume level to
ensure playback sound pressure levels remain within comfortable limits.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way or exhibits a distinct or sudden
change of operation or performance.
The series is not magnetically shielded, please ensure that they are
positioned at least 1 metre/3 feet away from items that could be damaged by
stray magnetic fields. Conventional glass tube (CRT) televisions and computer
monitors together with media such as floppy discs, cassettes and videotapes
are particularly susceptible.
PMC has made efforts to provide accurate installation information and good
quality fixings, PMC Ltd / PMC USA LLC cannot be held responsible or liable for
injuries or property damage - direct, indirect or consequential - arising out of
use or inability to use this product safely and properly.
8
9
7
6
5
4
3
2
1
Congratulations you have joined the elite
Stevie Wonder Prince Google
Coldplay Kraftwerk Peter Gabriel
Robbie Williams Brian May
Eleanor McEvoy Francis Rossi -
Status Quo Brian Ferry
Peter Andre Bryston Tori Amos
Underworld Crystal Method
Tony Bennett John Rutter
Rough Trade BBC Radio BBC TV
Capital Radio Piccadilly
Radio RTL Emil Berliner/Deutsche
Grammophon NFL (National
Football League) teldex Studios
Hospital HDTV Broadcast Studios
Digidesign Siemens EMI Royal
Shakespeare Company DECCA
The Moving Picture Company
Paul Merton ORF The University of
Music - Düsseldorf The Royal
School of Music JVC DENON UK
The Royal Astronomical Society
Warner Music Capitol records
Chesky records N.Y. University
With PMC you can to hear exactly what the artist intended,
not a poor interpretation
.
Robbie Williams
Advantage - USA BBC London - UK
Mastermix - USA
Francis Rossi
Pierce Rooms – UK
Orf - Austria
Brian May
Metropolis - UK
Telegenic – UK
Teldex - Berlin
Swoon Factory - Austria Optimum Mastering - UK
Studio Delphine - France
Emil Berliner Studios - Berlin
BBC Sounds One OB - UK
Teldex - Berlin The Hospital Studio HDTV Centre - UK
Nautilus Masterung - Italy
Metropolis - UK
Our sole aim while designing loudspeakers was to recreate the
true essence of an artist's intention, combining an ultimate level
in sonic resolution with solid engineering principles.
We believe that the same loudspeaker can be used throughout
the entire audio chain - from composer to studio or film stage,
and then finally the consumer. Our unswerving passion for
getting it right has made this goal possible.
Thank you for choosing PMC products. It is now time for you to
read the user guide, press the play button, and realise just how
much you've been missing.
Peter Thomas
Owner & Chief Designer
A message from Peter Thomas -
arguably the world’s smartest
loudspeaker designer ...
and a truly obsessive audiophile.
Introduction
The series of in & on-wall loudspeakers are a true breakthrough and encompass
PMC’s award-winning professional monitoring heritage in a slim and elegant design,
ideally suited to match modern décor and lifestyles.
PMC products are to be found in every demanding environment, from broadcast and
major film scoring to CD and DVD mastering. No other manufacturer can rival the
accumulated technical knowledge and high level of engineering excellence PMC has
developed over many years at the peak of professional monitoring. This expertise has
been encapsulated in the development and production of the PMC consumer range.
The series is ideal for stereo or all channels of a surround system. The has
been engineered with an identical tonal balance and similar dispersion characteristics
to all PMC models, thereby any combination will afford seamless integration and a
perfect audio picture. The professionally proven TLE1 active subwoofer can also
partner any of the range to provide the ultimate in low frequency power and
musicality.
See page 21 of this user guide & www.pmc-speakers.com
‘Closing the loop between the studio and the home’
loudspeaker user-guide
8
PMC’s ATLTMApproach
The world’s leading professionals rely on the accuracy of PMC’s ATL™designs everyday to
create much of the music and sound you hear everday.
PMC’s ATL
™
(Advanced Transmission Line) enclosures have taken loudspeaker design to the
highest level. A PMC transmission line design utilises sophisticated cabinet construction,
proprietary drive units and patented absorption materials and techniques. The benefits are
enormous compared to the relatively simple sealed and ported models currently available
elsewhere.
The main driver is placed at one end of a long tunnel (the transmission line), which is heavily
damped with absorbent acoustic material. This material is specified to absorb the upper
bass and higher frequencies that radiate from the rear of the main driver. The lowest
frequencies, which remain in phase, then emerge from the large vent at the end of the line,
which essentially acts as a second driver. One advantage to this approach is that the air
pressure loading the main driver is maintained, thus controlling the driver over a wide
frequency range, which in turn significantly reduces distortion. A spin-off from the lack of
distortion is that the upper bass and midrange is not masked by harmonic distortion residing
in the very low frequencies. The result is
PMC characteristic transparent midrange
and fast, attacking bass notes, all with
outstanding clarity. A further advantage
of the transmission line approach is a
cabinet that produces a higher SPL and
lower bass extension than a ported or
sealed design of a similar size.
Moreover, as the loading on the
main driver is maintained at all
volumes, the frequency
response also remains consistent
regardless of listening level. Neither
casual late night listening nor
prolonged monitoring sessions have
to be conducted at high volumes
to achieve maximum bass
response, a characteristic that is
especially suited to the home user.
Hand finished,
balanced veneer.
(inside & out)
Hand made,
matched, high order,
precision crossovers
Inert, ultra rigid
cabinet braced
by internal baffles
Ultra low
distortion drivers,
tried and tested in
the pro world
Precision
computer cut
panels and
joints
100%
Medite™
core
Custom profiled
line damping,
increasing air
density up to 30%
DB1i - The smallest ATLTMin the range
loudspeaker user-guide
9
Unpacking
Please retain your packaging for future use as all PMC cartons are durable,
reusable and can be employed to safely transport your loudspeakers
should they be relocated.
Much of the packing is constructed from recyclable materials, so if you are
to dispose of it please do so in an environmentally friendly manner.
Packing materials can pose danger to animals, the young
and vulnerable. Ensure these items are kept or disposed of safely.
loudspeaker user-guide
10
Our attention to detail
All PMC loudspeakers are hand-built in the U.K. using individual components that are
matched to our reference model; this includes the structural integrity of every cabinet
and the testing and recording of each component. This guarantees it will be within our
strict tolerances and ensures your purchase sounds identical to the original design.
Each completed loudspeaker then undergoes a set of objective and subjective
measurements - frequency response sweeps ensure that the design meets our
exacting performance criteria, and then listening tests are conducted against the
reference model using a wide variety of material, from a benchmark BBC speech test
to classical music, pop and rock.
loudspeaker user-guide
11
wafer™series installation examples
Mixing and matching any of
the series and PMC’s
consumer range creates a
supreme and unbeatable
surround system.
See page 21
loudspeaker user-guide
12
wafer™back panel
Connections
To avoid potential damage, please ensure that your power amplifier(s) or receiver
is turned off before making or breaking any loudspeaker connections.
When selecting cables for use with your PMC loudspeakers, ensure that their
construction is of a high enough quality to withstand the rigours of everyday use.
While bare wire can be accommodated by the binding posts,
we recommend the use of either spade lugs or 4mm banana plugs in order to
maintain an electrical connection of the highest integrity and avoid the possibility of
short circuits. Please consult your dealer for more information regarding cable
lengths and termination options.
It is of vital importance to observe the polarity markings and maintain
positive-to-positive and negative-to-negative connections from amplifier or receiver
to the . The terminals are colour-coded to aid in their identification,
positive terminals are red, negative terminals are black.
loudspeaker user-guide
13
control
- high frequency adjustment
Fine adjustment for perfect definition.
The sports a three position tweeter level control to ensure a perfect tonal
integration into even the most difficult environment.
FLAT
The FLAT setting is perfect for the majority of installations.
HF-
Rooms with very little soft furnishings, like kitchens, can emphasise the high frequency,
so a reduction may be desirable by moving the switch to the HF- position.
HF+
Conversely a very heavily furnished absorbent room or if the is placed behind a
perforated projector screen may need a small high frequency boost to improve
definition. Set to the HF+ position.
These are not hard and fast rules, as every
listening environment has its own distinct
acoustic. For the best results listen to the
same recording on each of the HF settings
and adjusting accordingly.
loudspeaker user-guide
14
control
- TT Technology
™
Perfect response in either horizontal or vertical placement.
The has a number of innovative features that will further enhance the quality of
sound so it can be sited where it is convenient and most pleasing to the eye.
The first of these is . This feature has two distinct benefits; firstly, either
tweeter can be switched to ensure a perfect response in either horizontal or vertical
placement.
control
Shading denotes
functioning drivers
loudspeaker user-guide
15
loudspeaker user-guide
16
control
HF +
H
F -
F
LAT
VERTICAL
BEAM-UP
HORIZONTAL
Switch in the 'Beam-Up' position
Hi Zone
Lo Zone
Mid Zone
no need for beam up setting
Lo Zone
PMC’s also allows for steerable image techniques which utilises
both tweeters to tilt the direction of the sound - a perfect solution if the is
placed very much higher or lower than the listening position.
(This mode will only function when the cabinet is in the correct horizontal position
with the controls set as per the diagram above)
control
- using TT Technology
™
to ensure high performance when
placement is less than ideal.
The ultra-shallow ‘ ’ interior of each
cabinet is divided to create a long chamber,
which is in turn lined with special acoustic
materials. The result is an expansive, dynamic
soundstage, with the type of deep bass one
would only expect from a speaker many
times the size.
Standard in-wall and on-wall designs are
compromised by the large surface area of
their front baffle that surrounds the drive units.
This detrimental effect is best compared with
cupping your hands around your mouth whilst
speaking. PMC’s acoustic specialists have
developed a unique, structured, absorbent
surface that prevents these unwanted
characteristic sound waves being reflected.
The drive units behave as though in free space
and concentrate pure, untainted audio
directly into the listening space.
loudspeaker user-guide
17
wall mounting the
Warning
Carefully assess the make-up, strength and construction of the surface you are
mounting to. Ensure you avoid concealed services e.g. pipes, cables etc. The fixings
supplied are suitable for a solid wall, e.g. brick. Other surfaces with less substantial
construction will require specialist fixings, (not supplied). If in doubt, please consult
a qualified professional.
Before embarking on the installation ensure the kit is complete.
Check list
1 x Large printed card template printed on either side for horizontal
or vertical placement.
2 x Adjustable speaker plates (20mm x 80mm)
2 x Wall mounting plates (85mm x 45mm)
3 x Long screws
3 x Short screws
3 x Wall plugs
2 x Soft, self adhesive feet
loudspeaker user-guide
18
As the can be mounted vertically or horizontally, firstly choose which
orientation you require and select the corresponding side of the large printed
card template included within the packing.
Position the template in the desired point on the wall ensuring it is level.
The dotted lines denote the horizontal and vertical centres of the .
This will ensure accuracy if you are attempting to place the cabinets centrally,
adjacent or under a screen.
Mark the wall through the template using the six points denoted by crosses.
These correspond identically to the holes in the wall mounting plates.
Drill the holes in the wall at least 45mm deep. Insert the six plastic wall plugs and
screw the plates to the wall using the six long screws.
The cabinet can be mounted in vertical or horizontal positions. This will determine
to which top edge the plates will be best attached. (See the Positioning section
of the manual for details) There are small pilot holes positioned 30mm from the
edges of the cabinet to locate the four short screws that attach the adjustable
speaker plates to the cabinet.
Stick one of the soft adhesive feet in either bottom corners of the rear of the
cabinets approximately 30mm in from the edges of the cabinet.
Connect the loudspeaker cable to the . RED + / BLACK –
(See Connections section of the manual)
Locate the prongs of the wall plates with the speaker plates and slide the
down until it is securely fixed. If the is not perfectly level remove the
cabinet from the wall and adjust the levels of the speaker plates.
PMC has made efforts to provide accurate installation information and good quality fixings, PMC Ltd / PMC USA
LLC cannot be held responsible or liable for injuries or property damage - direct, indirect or consequential - arising
out of use or inability to use this product safely and properly.
8
7
6
5
4
3
2
1
loudspeaker user-guide
19
wall mounting the (cont...)
15+ hours
to run-in
running or breaking in
When loudspeakers are new they will take time to reach their full potential.
It is often debated whether any solid-state equipment, such as CD players or
transistor-based power amplifiers change with use, but the characteristics of
mechanical devices such as loudspeakers do alter and improve their performance
significantly after a short ‘running in’ period.
The science is simple; as the soft material surrounding the dome or woofer cone is
flexed it will eventually reach a point where it has optimum compliancy allowing the
drive unit to move more freely. This translates to greater accuracy and speed of
attack in the bass region and the mid and high frequency produces a far more vivid
audio picture. This short ‘running in’ period takes approximately 15 hours of
normal use.
loudspeaker user-guide
20
suggested associate loudspeakers
PMC manufacture a large selection of loudspeakers and sub-woofers to meet a range
of budgets and uses, from compact, audiophile designs to large studio monitors.
The following products make ideal companions to create an unbeatable surround
system or for supreme audio throughout the home.
DB1M-Ci
(Magnetically screened
horizontal centre channel)
CB6i
(Three way magnetically
screened horizontal centre)
TB2M-Ci
(Larger, magnetically
screened horizontal centre)
TB2i
(Larger, Two way monitor)
DB1i
(Compact two way monitor)
wafer1-iw
™
(Two Way in-wall monitor)
wafer2-iw
™
(Larger Two way in-wall monitor)
TLE1
(Active Subwoofer)
FB1i
(Two Way, Floorstander)
GB1i
(Compact, Two Way Floorstander)
OB1i
(Larger, Three Way
Floorstander)
wafer1
™
(Two way on-wall monitor)
wafer2
™
(Larger, Two way on-wall monitor)
loudspeaker user-guide
21
PB1i
(Larger Three way floorstander
with twin bass drivers)
EB1i
(Large Three way floorstander with
a PMC 10” Piston bass driver)
IB2i
(Three way stand mount
with a PMC 75mm mid and
a PMC 10” Piston bass driver)
MB2i
(Three way stand mount with
a PMC 75mm mid and a
12” Radial™bass driver)
MB2 XBDi
(Large Three way floorstander
with a PMC 75mm mid & twin
12” Radial™bass drivers)
BB5i
(Three way stand mount with
a PMC 75mm mid and
a 15” Radial™bass driver)
suggested associate loudspeakers (cont...)
loudspeaker user-guide
22
MB2-Ci
(Three way horizontal centre channel
with a PMC 75mm mid and a
12” RadialTMbass driver)
XB2
(Passive subwoofer with a
12” RadialTMbass driver for a MB2i
based surround system)
XB3
(Passive subwoofer with a
15” RadialTMbass driver for a BB5i based
surround system)
BB5-Ci.
(Three way horizontal centre channell
with a PMC 75mm mid and a
15” RadialTMbass driver)
IB2-Ci
(Three way horizontal centre with
a PMC 75mm mid and
a PMC 10” Piston bass driver)
suggested associate loudspeakers (cont...)
loudspeaker user-guide
23
service
We are confident your loudspeakers will afford many years of trouble-free
listening of the highest order, but in the unlikely event that one or more requires
repair, our unique manufacturing procedure, wherein the precise value of each
component together with the response of the system as a whole is recorded,
will ensure that any replaced parts will exactly match the performance of those
originally included within each individual loudspeaker.
For any issues that might arise or for advice and service requirements, the primary
point of contact should be your knowledgeable and authorised PMC
dealer/distributor. If you do not have a local representative please see
www.pmc-speakers.com and click on distribution.
Important Note: Please do not return any products to PMC directly without first
contacting our support department and obtaining a Return Authorisation Number.
loudspeaker user-guide
24
warranty on-line
loudspeaker user-guide
25
If you do not have access to the internet fill in the
warranty form found on pages 26 & 27 and post it to us.
WARRANTY ON-LINE
GO TO WWW.PMC-SPEAKERS.COM AND CLICK ON REGISTER PRODUCT
SIMPLY ACTIVATE YOUR 5 YEAR
WARRANTY ON-LINE
warranty certificate - part 1
Please complete and retain this page for your own records
Product
Serial Nos
Date of purchase
Dealers name
Dealers address
Town
County
Postcode
Dealers Telephone No
Servicing and warranty issues – Please read the following carefully.
Non UK clients
Contact your local dealer/distributor for the details of warranty repairs - see www.pmc-speakers.com and click on distribution for their
details.
UK clients
In the unlikely event of a fault occurring with your PMC product firstly contact your dealer where the product was purchased.
Do not return a product to PMC Ltd without firstly contacting our technical dept. If the product must be returned for service you will be
issued with a Returns Authorisation number.
If a product is returned to PMC Ltd and subsequently is found to have no fault or a non-warranty fault it will be subject to a minimum of
£50.00 plus the carriage for its return.
Proof of purchase is required for any claim covered by this warranty.
This product is warranted for a period of 5 years from the date of purchase or upon receipt of ‘our copy’ overleaf or on-line registration
within ten days of purchase or receipt.
The warranty covers defects due to faulty materials or workmanship but does not cover defects arising from accidental damage, misuse
or wear and tear. The warranty is void if any attempt has been made by persons not authorised by PMC Ltd to dismantle, repair or
modify any part of the product.
Products must be returned using original packing material. This warranty does not cover damage in transit.
Note that the cost of the carriage to PMC is not covered by the warranty.
Returned products that are defective that are covered by warranty will be repaired or replaced at the discretion of PMC Ltd.
Allow minimum of 14 working days for return of warranty repairs.
This warranty does not effect your consumer rights under statutory law. This warranty certificate is only valid in the United Kingdom.
PMC LIMITED 43-45 Crawley Green Road Luton LU2 0AA UK T +44 (0) 870 4441044 F +44 (0) 870 4441045
loudspeaker user-guide
26
your copy
to KEEP
Please complete and return this section - or simply complete the on-line
registration at www.pmc-speakers.com and click on register product.
Help us improve
our products
see over
warranty certificate - part 2
Product
Serial Nos
Date of purchase
Purchased from
Your name
Your email address
Your address
Town
County
Postcade/Zip code
our copy
loudspeaker user-guide
27
We value all our client’s comments. Please take a moment to help us improve:
If there is one thing we should change, what would it be?
Please tell us how your new PMC’s perform. Your comments may appear on the
customer quotes section for this product on our site. N.B. Don’t worry the comments
will be anonymous; your personal details will not appear.
What magazines do you read?
HiFi Pro Lifes style Online
HiFi Choice Future Music T3 mixonline.com
What HiFi Sound on Sound Stuff gearslutz.com
Stereophile Audio Media GQ avreview.co.uk
HiFi World Pro Sound News Boys Toys avforums.com
HiFi Critic Resolution FHM HiFi WigWam.com
HiFi News Audio Fanzine Shortlist What HiFi.com
HiFi+ IBE Maxim
Grammophone Line Up Esquire
We hope you enjoy your latest purchase as much as we
enjoyed designing and building them - Thank you.
your comments
help us improve
loudspeaker user-guide
28
specifications
wafer 1
™
wafer 2
™
Freq response 50Hz-25kHz 40Hz-25kHz
Sensitivity 87dB 1w 1m 90dB 1w 1m
Impedance 8 Ohms 8 Ohms
Drive Units LF 140mm (5
1
/2”) LF 170mm (61/2”)
HF 2 x 27mm Soft dome HF 2 x 27mm Soft dome
Input connectors 1 pair 4mm sockets 1 pair 4mm sockets
Dimensions H x W x D H x W x D
Cabinet 500 x 235 x 100mm 575 x 355 x 100mm
(19.7 x 9.3 x 4 inches) (22.6 x 14 x 4 inches)
Cabinet with grille 516 x 267 x 108mm 591 x 387 x 108mm
(20.3 x 10.51 x 4.25 inches) (23.27 x 15.24 x 4.25 inches)
Weight 5kg (11 lbs) 6.6kg (14.5 lbs)
Colours White, Black White, Black
wafer1
™
(Two way on-wall monitor)
wafer2
™
(Larger, Two way
on-wall monitor)
loudspeaker user-guide
29
inspection certificate
Every component that appears in a PMC product is measured, tested, matched
and recorded by hand. This analysis also applies to the final product with the
addition of the ultimate test of the human ear. We simply listen to every product
we make to ensure you receive an identical replica of the reference model.
Enclosure finish
Assembly & Wiring
Driver Installation
Enclosure seal test
Level - Frequency test
Impedance - frequency test
Listening test 1
Listening test 2
Final inspection
Accessory pack
User Guide included
all the above checked by
Date
loudspeaker user-guide
30
PMC LIMITED
43-45 CRAWLEY GREEN ROAD LUTON LU2 0AA UK
T +44 00 (0)870 4441044 F +44 00 (0)870 4441045
email sales@promonitor.co.uk web www.pmc-speakers.com
PMC USA LLC
17952 SKY PARK CIRCLE Building 45 SUITE A IRVINE CA 92614 USA
T 949 861 3350 F 949 861 3352
email sales@pmc-speakers.us web www.pmc-speakers.com
Loading...