PMC IB1S-AIII User Manual

User Guide

Hand built by

TM

Advanced Transmission Line

Model

Serial No.

IB1S-AIII

IMPORTANT

!

Warranty Certicate

Please take a few moments to complete the warranty card at the back of this

booklet (or register at www.pmc-speakers.com) as this not only records the

purchase of your loudspeakers, but also provides you with an opportunity to make

suggestions and provide feedback directly to PMC.

Product Support

For product support, accessories or servicing advice, please contact

a PMC authorised dealer. See www.pmc-speakers.com

Company Details

THE PROFESSIONAL MONITOR COMPANY LIMITED

Holme Court, BIGGLESWADE, SG18 9ST

T [phone] F + (0) 870 4441045

email: [e-mail] web: www.pmc-speakers.com

© 2017 PMC. All rights reserved.

PMC Stock Code: 14849 Ref. no: 707v2

This document should not be construed as a commitment on the part of PMC. The information it contains is

subject to change without notice. PMC assumes no responsibility for any errors within this document.

CE Conformity: PMC active loudspeakers conform to EC Directive LVD2006/95/EC and EMC 2004/108/EC.

WEEE European directive: PMC is a member of a National Compliance scheme and has gained the

associated certication of compliance from the Environment Agency with the registration WEEE/GJ0101WU.

WEEE EU Directive

This symbol on the product, and in or on its packaging, indicates that this product must not be disposed

of with other household waste. It is the responsibility of the owner to dispose of waste equipment via a

designated collection point for the recycling of waste electrical and electronic equipment. The recycling

of waste equipment is an attempt to conserve natural resources and ensures that it is recycled in a manner

that protects human health and the environment. For more information about where to dispose of waste

equipment for recycling, please contact your local waste/recycling authority or the dealer from whom you

purchased the product.

A message from Peter Thomas:

Peter Thomas

Owner & Chief Designer

“

Our sole aim while designing loudspeakers is to recreate the true essence of an artist’s

intention, combining the ultimate level of sonic resolution with solid engineering principles.

We believe that the same loudspeaker can be used throughout the entire audio chain,

from composer to studio or lm stage, post-production or mastering and then, nally,

the consumer. We also think that a well designed loudspeaker should be able to excel

regardless of the audio genre, and reproduce spoken word, rock, pop, or classical music

with the same precision and accuracy. Our unswerving passion for getting it right has made

this goal possible.

Thank you for choosing PMC products. Please read this user guide and install your new

IB1S-AIII activated reference monitors bearing in mind the advice given within.

Over more than two decades PMC has

earned an unrivalled reputation for creating

the world’s nest professional loudspeakers.

Simply put, our loudspeakers provide a

reference for the world’s highest prole

productions and events. They are found at

every stage of the creative process, from

conception to recording and broadcast

and, of course, in the home.

Our client list reads like a who’s who of the

sonically aware, with Elbow, Stevie Wonder,

Coldplay, Brian May, Universal, EMI, Sony,

Pinewood Studios, Dreamworks, Deutsche

Grammophon and the BBC among the

makers of movies and music who use our

products.

Our loudspeakers were also used in the

production of Titanic, Spiderman III, James

Bond’s Skyfall and Spectre, Finding Nemo,

Pirates of the Caribbean III, and during

broadcasts of the London Olympics, 2012.

EMI

Stevie Wonder

BBC

Tony Bennett

Coldplay

UNIVERSAL MUSIC GROUP

elbow

Thomas Newman

Royal College of Music

Afrojack

Warner Music

Kraftwerk

Pinewood Studios

Capitol Studios

Google

ESPN

SONY

JVC Studios

PMC: the authority for quality sound.

Congratulations - You have joined the elite.

User Guide

Contents

Important Safety Instructions

Introduction

Unpacking and Care

PMC’s

TM

–

How the Advanced Transmission Line Works

System Description

Connections

Positioning & Alignment

Specications

Service

The PMC Professional Range

Our Meticulous Care and Attention

Inspection Certicate

Warranty On-Line

Warranty Certicate – Part 1 – Your copy

Warranty Certicate – Part 2 – PMC’s copy

Help us improve – Your Comments

Notes

Read these instructions and keep them in a safe place for future reference.

Heed all electrical safety warnings, including any on the loudspeaker itself.

Do not use the loudspeaker near water.

Do not install the loudspeaker near heat sources such as radiators, ovens or other very hot

equipment, or in unventilated softs or enclosures.

Do not attempt to service the equipment. There are no user-serviceable parts inside.

Please refer all servicing to PMC authorised personnel.

Servicing is required when the apparatus is damaged, exposed to moisture, or exhibits

a distinct or sudden change of operation or audio performance.

Unplug this product from both signal source and power during electrical storms, or when

unused for extended periods of time.

Packaging material can pose danger to the young and vulnerable. Ensure these items

are stored or disposed of safely.

The IB1S-AIII activated monitor can produce high sound pressure levels. Exposure to high

levels of sound has the potential to cause hearing damage. Use care when adjusting the

system volume to ensure sound pressure levels remain within safe and comfortable limits.

Very powerful magnets are employed in the IB1S-AIII activated monitor which may

have a detrimental effect on magnetically-sensitive items if placed too close, such as CRT

(tube-style) televisions or monitors, and media such as cassettes and videotapes.

The loudspeaker cabinet should only be cleaned with a dry, lint-free, cloth. Do not use

solvents, abrasives, waxes or liquids as they may be detrimental to the nish.

To avoid damage to ooring when using the IB1S-AIII studio stands the user should

determine the suitability of either spikes or protective glides.

PMC has made efforts to provide accurate installation information and good quality

xings. However, PMC will not be held responsible or liable for injuries or property damage

(direct, indirect or consequential) arising out of use or inability to use this product safely

and properly.

The power switch is located on the rear of the speaker. The mains cord is used as a mains

disconnect device and should remain accessible at all times.

Only use at altitudes not exceeding 200m – Only use in non-tropical climate regions.

Important Safety Instructions

Thank you for choosing the PMC IB1S-AIII activated monitor. This guide provides installation and

operating instructions.

Reference plug & play monitoring

The IB1S-AIII offers reference level quality monitoring in a three-way plug and play design. It is

the ideal monitoring solution for discerning and highly critical professionals in small to medium

sized control rooms for all applications including recording, mixing, broadcast, post-production,

and mastering applications. No matter the material, whether it is the subtleties of vocal

harmonies, strings, or extreme bottom end, their signature transparency and accuracy means

that all critical decisions can be made instantly with complete condence.

Precision soft dome high- and mid-frequency drivers provide ultra-high denition and an

extremely wide, natural dispersion to create a vivid soundstage over a vast listening area. PMC’s

ATL bass loading technology, teamed with its ten-inch carbon bre LF piston driver, provides

identical dynamics and deep, dened bass at all monitoring levels.

At A Glance

• 3-way, plug & play reference monitor

• PMC’s unique ATLTM (Advanced Transmission Line) bass loading technology

• 27mm HF, 75mm MF (soft dome), 10-inch carbon bre and NomexTM piston driver

• High resolution, ultra-low distortion

• Low fatigue with a at response at all levels

• Vivid soundstage over a vast listening area

• Abundant headroom – PMC 400W Class-D Amplication

• Balanced XLR input with level control (17dB - 37dB)

Introduction

Unpacking and Care

The PMC IB1S-AIII activated reference monitors are packed in heavy-duty protective cartons. Please

retain the carton to ensure that the loudspeaker can be transported safely if the need arises in the

future. If you dispose of the packaging please do so in an environmentally responsible and safe way.

What’s in the Box?

The IB1S-AIII reference monitors are heavy. Please take care when lifting from the carton.

Do not attempt to use the loudspeaker if the packaging has been water-damaged.

Please Note: These units must be earthed

Care and Service

In normal usage PMC speakers should provide many years of trouble-free operation, but in the unlikely

event that you suspect damage or failure has occurred do not attempt to repair the unit yourself as

there are no user-serviceable parts inside. Contact an authorised dealer for advice. Only clean the

cabinets with a dry and lint-free cloth as solvents may cause damage the nish of the unit.

!

1x IB1S-AIII activated monitor speaker

1x AC mains power cable

1x User guide