Pluribus Networks F9572L-V, F9572BL-V Quick Start Manual

3

1

1

2

123

1

111

1

1

Quick Start Guide

54-Port 25G/100G Fiber Ethernet Switch

F9572L-V | F9572BL-V

1. Unpack the Switch and Check Contents

F9572L-V or F9572BL-V

Rack Mounting Kit—2 front-post brackets, 2 rear-post
brackets, 20 screws, and 2 ear-locking screws

Power Cord (included with AC PSUs only)

Console Cable—RJ-45 to DB-9

Dust Cover Kit—6 for QSFP port and 48 for SFP ports

Documentation——End-User License Agreement, Quick

Start Guide (this document) and Safety and Regulatory
Information

Caution:

and fan tray modules that are installed into its chassis. All
installed modules must have a matching airflow direction.
That is, if the installed power modules have a front-to-back
(F2B) airflow direction, all the installed fan tray modules
must also have a F2B airflow direction.

Note:

illustration only and may not match your particular switch
model.

The switch includes plug-in power supply (PSU)

The switch drawings in this document are for

Caution:

people. One person should position the switch in the rack,
while the other secures it using the rack screws.

装置の吸排気に必要な領域を マニ ュ アル上に規定 して
いる。

Installing the switch in a rack requires two

3. Adjust Rear-Post Bracket Ears

Lock the position of the rear-post bracket ears using the
included position-locking screws.

You can also adjust the rear-post bracket ears to fit different
rack depths from 56 cm to 75 cm.

4. Connect Power

2. Attach the Brackets

Attach each of the front- and rear-post brackets to the
switch using four of the included bracket screws.

Use an additional two screws to secure each of the rear-post
brackets at the mid-point on the sides of the switch.

Use the screws and cage nuts supplied with the rack to
secure the switch in the rack.

www.pluribusnetworks.com

Connect an external AC power source to the PSUs.

5. Verify Switch Operation

Verify basic switch operation by checking the system LEDs.
When operating normally, the PSU1/PSU2, Diag, and Fan

LEDs should all be on green.

19-0021

– 1 –

6. Configuring the switch

To configure your switch please refer to the Pluribus Networks
Quick Start Guide available at this location:

http://www.pluribusnetworks.com/get-started/

Hardware Specifications

Switch Chassis

Size (WxDxH) 438.4 x 473 x 44 mm (17.26 x 18.62 x 1.73 inches)

Weight 9.6 kg (21.164 lb), with two installed PSUs

Temperature Operating: 0° C to 45° C (32° F to 123° F)

Storage: -40° C to 70° C (-40° F to 158° F)

Humidity Operating: 5% to 95% (non-condensing)

Quick Start Guide

Power
Consumption

AC PSU

Power Rating 100–240 VAC, 50-60 Hz, 650 Watts

AC Input 100–240 VAC, 50-60 Hz, 10–5 A or 8.2-3.5 A or 7.8-

DC Output 5 VSB @ 4-2.5 A, 12 VDC @ 54 A-52.9 A

Regulatory Compliances

Emissions EN 55032:2012+AC:2013, Class A

Immunity EN 55024:2010+A1:2015

Safety UL (CSA 22.2 No 60950-1 & UL60950-1)

450 W

3.8 A

EN 55032:2015+AC:2016, Class A
EN 61000-3-2:2014, Class A
EN 61000-3-3:2013
FCC Class A
VCCI Class A
CE Mark
KC Certification

IEC 61000-4-2/3/4/5/6/8/11

CB (IEC/EN60950-1)

– 2 –

E052017-AP-R01

150200001739A