LCM-3G SERIES
LCM-3G SERIES
Multi Format LCD Monitor
User’s Manual
LCM-3G SERIES
PRECAUTION----------------------------------------------------------- ERROR! BOOKMARK NOT DEFINED.
1. OVERVIEW--------------------------------------------------------- ERROR! BOOKMARK NOT DEFINED.
2. GENERAL FEATURES -------------------------------------------------------------------------------------8
3. FUNCTIONAL EXPLANATION OF EACH PART --------------------------------------------------------8
1) FRONT PANEL ---------------------------------------------------------------------------------------------8
LCM-119 --------------------------------------------------------------------------------------------- 8
LCM-123 --------------------------------------------------------------------------------------------- 9
Front Keys Arrangements ---------------------------------------------------------------------------9
Front Keys Operations ------------------------------------------------------------------------------- 9
Front panel LED Operations----------------------------------------------------------------------- 10
2) REAR PANEL -------------------------------------------------------------------------------------------- 10
LCM-119 ------------------------------------------------------------------------------------------- 10
LCM-123 ------------------------------------------------------------------------------------------- 10
Connection Details -------------------------------------------------------------------------------- 11
Interface description------------------------------------------------------------------------------- 11
4. MENU OVERVIEW ------------------------------------------------------------------------------------- 11
1) TO SHOW AND REMOVE THE MENU ---------------------------------------------------------------------- 12
2) TO GO TO THE NEXT LEVEL ------------------------------------------------------------------------------- 12
3) TO GO BACK TO THE PREVIOUS LEVEL --------------------------------------------------------------------- 12
4) TYPICAL MENU OPERATION------------------------------------------------------------------------------ 12
5. BASIC OPERATION ------------------------------------------------------------------------------------ 12
1) TURNING ON THE MONITOR----------------------------------------------------------------------------- 12
2) ON SCREEN MENU LANGUAGE SELECTION---------------------------------------------------------------- 12
6. ON SCREEN MENU SELECTION AND ADJUSTMENT ----------------------------------------------- 13
1) HOW TO ADJUST THE OSD SCREEN ---------------------------------------------------------------------- 13
7. SELECT VIDEO INPUT --------------------------------------------------------------------------------- 14
1) HOW TO SELECT VIDEO SOURCE BY OSD----------------------------------------------------------------- 14
8. COLOR MENU------------------------------------------------------------------------------------------ 15
1) ADJUST------------------------------------------------------------------------------------------------- 15
LCM-3G SERIES
2) COLOR SELECT ------------------------------------------------------------------------------------------ 15
3) BACKLIGHT ADJUST ------------------------------------------------------------------------------------- 15
4) GAMMA SELECT ----------------------------------------------------------------------------------------- 15
5) MONO/BLUE ONLY ------------------------------------------------------------------------------------- 16
9. IMAGE MENU ------------------------------------------------------------------------------------------ 16
1) ASPECT RATIO ------------------------------------------------------------------------------------------ 16
2) SCAN -------------------------------------------------------------------------------------------------- 16
3) ZOOM-------------------------------------------------------------------------------------------------- 16
4) NR (NOISE REDUCTION) -------------------------------------------------------------------------------- 17
5) PC MENU (PC MODE ONLY) ----------------------------------------------------------------------------- 17
10. MARKER MENU OPTIONS -------------------------------------------------------------------------- 17
1) MARKER & USER MARKER------------------------------------------------------------------------------- 17
2) SAFETY MARKER ---------------------------------------------------------------------------------------- 18
3) CENTER MAKER ----------------------------------------------------------------------------------------- 18
4) MARKER WIDTH ---------------------------------------------------------------------------------------- 18
5) MARKER COLOR ---------------------------------------------------------------------------------------- 19
6) SAFETY MARKER COLOR --------------------------------------------------------------------------------- 19
11. SYSTEM MENU -------------------------------------------------------------------------------------- 19
1) SETUP LOAD & SETUP SAVE ----------------------------------------------------------------------------- 19
2) FUNCTION KEY------------------------------------------------------------------------------------------ 20
3) ON SCREEN DISPLAY ------------------------------------------------------------------------------------ 20
OSD Option ---------------------------------------------------------------------------------------- 20
Under Monitor Display (color: Tally R/G mode action ) ----------------------------------------- 21
ID Style --------------------------------------------------------------------------------------------- 21
4) SET ID & ACTIVE SET ID -------------------------------------------------------------------------------- 21
12. ADVANCED MENU ---------------------------------------------------------------------------------- 22
1) ADVANCED --------------------------------------------------------------------------------------------- 22
2) INFORMATION ------------------------------------------------------------------------------------------ 22
3) OPTION ------------------------------------------------------------------------------------------------ 22
4) SCREEN CONTROL--------------------------------------------------------------------------------------- 22
5) NETWORK CONFIG -------------------------------------------------------------------------------------- 23
LCM-3G SERIES
13. PIP MENU (PICTURE IN PICTURE) ----------------------------------------------------------------- 23
1) PIP ON/OFF------------------------------------------------------------------------------------------- 23
2) INPUT SOURCE------------------------------------------------------------------------------------------ 24
3) ASPECT RATIO ------------------------------------------------------------------------------------------ 24
4) POSITION----------------------------------------------------------------------------------------------- 24
5) PIP BLEND --------------------------------------------------------------------------------------------- 25
6) PIP SWAP ---------------------------------------------------------------------------------------------- 25
14. OSD TREE -------------------------------------------------------------------------------------------- 26
1) COLOR ------------------------------------------------------------------------------------------------- 27
2) IMAGE-------------------------------------------------------------------------------------------------- 27
3) MARKER------------------------------------------------------------------------------------------------ 28
4) SYSTEM ------------------------------------------------------------------------------------------------ 29
5) ADVANCED --------------------------------------------------------------------------------------------- 30
6) PIP ---------------------------------------------------------------------------------------------------- 31
15. SPECIFICATIONS------------------------------------------------ ERROR! BOOKMARK NOT DEFINED.
1) Panel & SUPPORTED SIGNALS -------------------------------------------------------------------------- 32
2) SUPPORTED TIMINGS ----------------------------------------------------------------------------------- 345
PC & DVI input ------------------------------------------------------------------------------------ 34
3) MECHANICAL DIMENSION ------------------------------------------------------------------------------- 36
LCM-207 ------------------------------------------------------------------------------------------- 38
LCM-209 ---------------------------------------------------------- Error! Bookmark not defined. 7
LCM-119 ------------------------------------------------------------------------------------------- 38
LCM-123 ---------------------------------------------------------- Error! Bookmark not defined. 8
LCM-132 ------------------------------------------------------------------------------------------ 389
LCM-147(TBD) ---------------------------------------------------- Error! Bookmark not defined.9
LCM-3G SERIES
Precaution
Before operating the set, please read this manual carefully.
WARNING:
To reduce the risk of any electric shock, do not remove back cover as there are no user serv
iceable parts inside. Please refer to Plura or a qualified service personnel/agent. To prevent
fire or shock hazard, do not expose the rear side of the unit to rain or moisture. Do not rub or
clean the Active Matrix LCD with any harsh surface as this may scratch, mark, or damage the
Active Matrix LCD permanently.
CAUTION:
Unauthorized tampering with the inside of the monitor voids the warranty.
The manufacturer shall not warrant for any damage caused by improper maintenance and/or
repair by any third party.
Important safeguards for you and your new product:
Please read and observe the following safety points when in stalling and using your new devi
ce and save them for future reference.
1. Read Instructions
2. Follow Instructions
All operating and use instructions should be followed.
3. Retain Instructions
The safety and operating instructions should be retained for future reference.
4. Observe Warnings
All warnings on the product and in the operating instructions should be adhered to.
5. Cleaning
LCM-3G SERIES
Disconnect the unit from the mains before cleaning. Do not use abrasive cleaners. Use a
damp cloth for cleaning.
6. Water and Moisture
Do not use this unit near water.
7. Transportation
A product should be transported with care. Excessive force and uneven surfaces may
cause the damage to product.
8. Attachments
Do not use attachments not recommended by Plura as they may cause hazards.
9. Ventilation
Do not block any of the ventilation openings.
Install in accordance with the manufacturer’s instructions.
10. Power Sources
This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply, consult your power
company.
11. Power Lead Polarization
This product is equipped with a three-wire grounding-type cord. This is a safety feature.
Do not use an alternative power cord.
12. Power Cord Protection
Power-supply cords should be protected so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles and the point where they exit from the product.
13. Outdoor Cable Grounding
If an outdoor cable is connected to the product, be sure the cable is grounded to provide
some protection against voltage surges and built-up static charges. A“face plate”also
needs to be installed with an isolating capacitor to prevent any damage from static.
14. Lightning
For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet. This will
prevent possible damage to the product due to lightning and power-line surges.
15. Earthling the product
This product must be earthed properly to comply with the safety regulations in the
country of use. If you are unsure of these regulations, please consult a qualified
electrician.
LCM-3G SERIES
16. Servicing
Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltages or other hazards. Refer all servicing to qualified
service personnel. If the device does not operate properly, switch it off and call your
dealer.
17. Service
Turn this product off, unplug from the mains supply and refer servicing to qualified
service personnel under the following conditions:
A. If the power-supply cord or plug is damaged.
B. If the LCD has been damaged.
C. If water or moisture penetrated the glass and/or the LCD screen.
D. If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal
operation.
E. If the product has been dropped or the frame has been damaged.
F. If the product exhibits a distinct change in performance.
18. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to p
erform safety checks to determine that the product is in proper operating con dition and t
he front seal is intact
.
19. Mounting
The product should be mounted on a wall only as recommended in the instructions.
20. Power
This device operates on an AC supply; the voltage is as indicated on the label on the
Manual. This device must be earthed at all times through the chassis as well as through
the power lead.
LCM-3G SERIES
1.
OVERVIEW
LCM Series consists of high quality HD LCD monitors, specifically designed for use in
Broadcast environment ensuring accurate color reproduction in accordance with SMPTE, EBU,
REC 709 Broadcast Standards. It supports up to 3Gbps-1080-60P along with all other Digital & Analog
inputs & formats, Composite/RGB/PC-RGB/DVI/HDMI/Component.
2.
GENERAL FEATURES
• SDI 2 Input / 2 Output.
• Color Temperature – User, VAR, 11000K, 9300K, 7500K, 6500K, 5000K and 3200K
• Over Scan/Under Scan/ 1:1 scan/ Zoom
• PIP (Picture In Picture)/PIP Blend
• Supports VESA DDC2B and a subset of VESA standards.
• Single board is suitable for mounting behind an LCD panel.
• Supported ETHERNET/Firmware Upgrade.
• OSD: Graphic based OSD, 6 Languages (UNICODE System).
• LCD Dimming Control
- Manual Dimming Level Control.
• ETHERNET: Network System Controller / Update
• Rack Mount.
3.
Functional explanation of each part
1)
Front Panel
LCM-119
Center Maker
Marker
Front Key
LCM-3G SERIES
LCM-123
Front Keys Arrangements
Front Keys Operations
Key Name
Operation
STANDBY
► Power ON/OFF Button. This button is operated after being pressed about 3 seconds.
SEL/INPUT
► Activates OSD menu of selected input source.
► Changes input source.
► Executes functions (by OSD help commands) in main OSD menu.
DOWN
► Decreases values of user menu in main OSD menu.
► Executes function (by OSD help commands) in main OSD menu.
UP
► Increases values of user menu in main OSD menu.
► Executes function (by OSD help commands) in main OSD menu.
MENU
► Activates main OSD menu.
► Navigates higher menu in main OSD menu.
► Exits OSD menu.
Center Maker
Marker
Front Key
LCM-3G SERIES
FUNCTION
► Executes user selected functions
UNDEF, Aspect, Zoom, Color tepm, Gamma select, PIP, PIP Source, PIP size, PIP Position,
PIP Swap, Input Composite, Input PC, Input HDMI, Input DVI
SCAN
► Executes Scan function ( Over-Scan -> Zero-Scan -> Under Scan-> Pixel to Pixel)
MARKER
► Draw Marker on Screen ( Off -> 16:9 -> 4:3 … -> 2.35:1 )
SDI 1
► Select SDI 1 source directly
SDI 2
► Select SDI 2 source directly
ANALOG
► Select ANALOG source directly
( ‘Composite1’ ->‘Composite2’ ->‘Composite3’ -> ‘S-video’ -> ’G.B.R’ -> ‘Y.Pb.Pr’ -> ’PC’ )
Front panel LED Operations
- Green Led will be ON when Power is ON
2) Rear Panel
LCM-119
LCM-123
LCM-3G SERIES
Connection Details
Interface description
Interface
Description
SDI 1 IN
SDI Input
SDI 2 IN
SDI 1 OUT
SDI 1 Loop Through Output.
SDI 2 OUT
SDI 2 Loop Through Output.
RS-232 IN
Update/Multi Control/Auto color calibration
HDMI
High Definition Multimedia Input
DVI
High Definition Multimedia Input Compatible
ETHERNET UPDATE
ETHERNET/Firmware Upgrade
VGA
Analog PC-RGB Video Input
CVBS1/Pr/R In
GBR (SOG sync) Input
Y, Pb, Pr Component Video Input
CVBS / Composite/S-Video Input
CVBS2/Y/G/Y In
CVBS3/Pb/B/C In
AC IN
AC 90V ~ 240V, 50Hz/60Hz
4.
MENU OVERVIEW
In this menu system, there are several ways to customize the menu settings provided.
Most menu consist of three levels to set up the options, but some require greater depth for the variety of
settings. If you press the MENU button, only the first and second level of the menu system will appear on
the monitor screen. The third level can be displayed by pressing SEL/INPUT. If a menu has more than
three levels, the pop-up dialogue box will be displayed as the fourth or fifth level.
LCM-3G SERIES
1) To show and remove the Menu
Press the MENU button to display the menu. A second press of the MENU button will take you back to
monitor viewing.
2) To go to the next level
Press SEL/INPUT button.
3) To go back to the previous level
Press MENU button
4) Typical Menu Operation
1. Press MENU button: The main menu will appear.
2. Use UP/DOWN button to select the desired menu option (icon).
3. While the desired menu option is selected, press SEL/INPUT to move to the second level.
4. Use UP/DOWN button to select the second menu option.
5. Press SEL/INPUT to move to the third level: Some menu options require additional steps.
6. Press MENU to return to the previous menu to return to monitor viewing.
5.
BASIC OPERATION
1) Turning On the Monitor
1. First, connect power cord correctly. At this moment, the monitor switches to standby or power on
mode. In standby mode, in order to turn monitor on, press the ST-BY button.
2. Select the viewing source by using SEL/INPUT button on Keypad in front of monitor
2) On Screen Menu Language Selection
- SETUP -> On Screen Display -> OSD Option -> Language
- The menu can be shown on the screen in the selected language.
- Supported Language: English, Spanish, Portuguese, German,
French, Italian
LCM-3G SERIES
6.
On Screen Menu Selection and Adjustment
1) How to adjust the OSD screen
1. Press the MENU button and then UP/DOWN button to select each menu.
2. Press the SEL/INPUT button and then use UP/DOWN (SEL/INPUT)/MENU button to display the
available menu.
• Your monitor's OSD (On Screen Display) may differ slightly from what is shown in this manual
LCM-3G SERIES
7.
SELECT VIDEO INPUT
1) How to Select Video Source by OSD
1. Press the SET/INPUT button and then UP/DOWN button to select the desired video source.
2. Press the SET/INPUT button to go to desired video source.
3. If Input Name is enabled, The SET/INPUT button goes into input name edit mode instead of selecting
source.
LCM-3G SERIES
8.
Color MENU
1) Adjust
- Adjust the values of Brightness, Contrast, Color, Tint and
Sharpness directly from -50 to 50
Contrast, Brightness, Sharpness, Color (All Sources), Tint (except
PC, Component), Phase (Component).
2) Color Select
- For Setting the Color temperature or adjusting RGB gain value
directly
- User (User setting RGB gain value), VAR(3200K ~ 11000K), Often
used value(11000K, 9300K, 6500K, 5400K,3200K)
3) Backlight Adjust
-Inverter dimming Level select (0~100)
4) Gamma select
- Gamma Level Select (0.8 ~ 3.0)
LCM-3G SERIES
5) Mono/Blue Only
- Mono color: For selecting monochrome images
- Blue Only: Images have only blue color
9.
Image MENU
1) Aspect Ratio
- For setting the aspect ratio.
- Full Screen: The images are displayed with a panel size.
- Full Screen, 16:9, 4:3, 14:9, 13:9, 1.85:1, 2.35:1: The images are
displayed with each aspect ratio.
- PC mode: Full Screen & 4:3 only
- Function Aspect: For setting the Aspect to use by Function KEY
controller.
2) Scan
1. Over Scan – 95% input size and fit the selected display size
2. Zero Scan – 100% Input size and fit the selected display size
3. Under Scan – 105% Input size and fit the selected display size
3. Pixel to Pixel – Display size is an input size. If input resolution is
bigger than panel size, fit the panel size
3) Zoom
- Can see the enlarged picture by (2X, 3X, 4X, 5X) ratios.
- If user select the Zoom 2X, can see the below yellow box in
picture.
- Press Select or Enter button, user can see the enlarged picture.
- Menu key escape the zoom mode.
- Example (3X3)
Zoom X position: Coordinate of video image’s column position.
Zoom Y position: Coordinate of video image’s row position.
4) NR (Noise Reduction)
Noise Reduction on/off (NR is for Video signal SD-SDI, Composite, S-Video, Y/Pb/Pr, DTV timing)
5) PC Menu (pc mode only)
- Only operate PC input mode
- Select Auto-adjust and adjust Phase, HV position, Frequency
- Auto-Adjust automatically set the optimum values of Phase, HV
position and Frequency.
10.
Marker MENU OPTIONS
1) Marker & User Marker
< Marker >
LCM-3G SERIES
- Only operate PC input mode
- Select Auto-adjust and adjust Phase, HV position, Frequency
- Auto-Adjust automatically set the optimum values of Phase, HV
position and Frequency.
< User Marker >
LCM-3G SERIES
LCM-3G SERIES
1. Marker : 16:9, 4:3, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1&4:3, User1, User2, User3 fitted panel size
marker on screen.
2. User Marker: The user Marker size. (Below panel size)
Example (1440x900 panel)
16:9 (16:9 Marker) 16:9 (4:3 Marker)
2) Safety Marker
-Safety Area: Draw dotted line Marker on screen for graphics and
logo applications. (16:9 95/93/90/88/80%, 4:3 95/93/90/88/80%,
EBU Action 16:9/14:9/4:3, EBU Graphic 16:9/14:9/4:3)
3) Center Maker
- “+” Marker on center of screen
4) Marker Width
-Marker line thickness setting. (0~10)
LCM-3G SERIES
5) Marker Color
- Marker Line Color: Select Marker line color (White, Yellow, Blue,
RED, Black)
6) Safety Marker Color
- Safety Line Color: Select Safety line color (White, Yellow, Blue,
RED, Black)
11.
System MENU
1) Setup Load & Setup Save
- Setup Load: Load user saved values or default value
- Setup Save: Save user setting values at user 1, 2, 3.
LCM-3G SERIES
2) Function Key
- Function Key: Select the function to be allocated to the FUNCTION buttons
Function Key
Description
UNDEF
Not set (no function allocated)
Aspect
Sets the aspect ratio of the images
Zoom
Zoom function is operated(Off, 2x, 3x, 4x, 5x)
Color Temp
User (User setting RGB gain value), VAR(3200K ~ 11000K), Often
used value(11000K, 9300K, 6500K, 5400K,3200K)
Gamma Select
Select Gamma curve
PIP
PIP on/off
PIP Source
PIP input Source can operate with different signal and type.
PIP size
Choose PIP size of Small/POP1/POP2
PIP Position
Choose the pip position on the each corner of the pane
PIP Swap
Using Swap option, you can exchange two programs or source at the
same time.
Input Composite
Switches the input source.
Input PC
Input HDMI
Input DVI
3) On Screen Display
OSD Option
Language: Select a language for the menu to appear in.
(English, Spanish, Portuguese, German, French, Italian)
OSD Position: L-T, R-T, C, L-B, R-B
Message OSD: Input Source Message on/off.
OSD Transparency: Disable blending OSD background with video
image.
LCM-3G SERIES
Under Monitor Display (color: Tally R/G mode action )
UMD: UMD display on/off
UMD Character: UMD Character Select
UMD Position: UMD display position select (L-T, C-T, R-T, L-B, C-B, R-B)
UMD FG Color: UMD Character color Select (RGB_255_192_128_Transparent)
UMD BG Color: UMD BG color Select (RGB_255_192_128_Transparent)
ID Style
-Input ID: source Message display.
-ID Style: select “Input Format”/”Custom Label”
-Input Label: Display user made name instead of input source name on source OSD and message OSD
4) Set ID & Active Set ID
- To control this monitor remotely you need to set a unique ID number (01~99).
Message OSD
SDI1 1920 x 1080i 60Hz
Input ID
00:00:00:00
Timecode
UMD
Channel-12
LCM-3G SERIES
- Set Active SET ID number is the max number of monitors’ controlled remotely via Ethernet or RS-232
- If your monitor control network consists of 15 monitors , then Active SET ID must set to 15.
12.
Advanced MENU
1) Advanced
- Information, Option, Screen Control, Network Config
2) Information
- Model Name, Firmware Version, Release time, operating time,
Monitor ID
3) Option
- FRONT LED: Front LED on/off
- Local Enable: Power, up and down key is only worked, if Local
enable is off.
- Blue Screen: Enables screen saver functions to avoid panel
burning.
- BG Gray: Select gray level on besides display picture
- Power save Mode: Power Save Mode on/off
4) Screen Control
-Reset Calibration
LCM-3G SERIES
Color Calibration Reset
-I/P Mode
Line Doubler/inter-Field/Field Merge function on/off
-Dithering
Dithering function on/off
- Internal Pattern:
100% Color Bars, 75% Color Bars, Luma, RGB, White, Black, RED, Blue, Green
5) Network Config
-Plura System Controller (PSC-400) Network setting.
Load Network Settings: ETHERNET configuration Press “Enter”.
(ID/IP Address/Gateway/Subnet Load)
DHCP: DHCP on/off (Manual IP settings – DHCP on)
* “Apply” enter all settings.
13.
PIP MENU (Picture IN Picture)
- Watch two programs or sources at the same time. And set up PIP size and position.
1) PIP ON/OFF
LCM-3G SERIES
- Control PIP function On/Off.
2) Input Source
- PIP input Source can operate with different signal and type.
- Analog (Composite1, 2, 3, Y.Pb.Pr, GBR, PC) inputs + SDI (SDI1, SDI2) inputs
-SDI + SDI input PIP
Ex) AV + S-Video (X), AV +SDI2 (O)
3) Aspect Ratio
- Choose PIP size of Small/POP1/POP2
4) Position
- Choose the pip position on the each corner of the panel
PIP Small
PIP1
POP2
5) PIP Blend
-Blend to PIP size of Small
6) PIP Swap
- Using Swap option, you can exchange two programs or source at the same time.
LCM-3G SERIES
LCM-3G SERIES
14.
OSD TREE
LCM-3G SERIES
LCM-3G SERIES
1) Color
2) Image
LCM-3G SERIES
LCM-3G SERIES
3) Marker
LCM-3G SERIES
LCM-3G SERIES
4) System
LCM-3G SERIES
LCM-3G SERIES
5) Advanced
LCM-3G SERIES
LCM-3G SERIES
6) PIP
LCM-3G SERIES
LCM-3G SERIES
LCM-3G SERIES
15.
SPECIFICATIONS
1) Panel Specifications
Model
Specifications
LCM-207-3G
Panel
TFT LCD Panel 2 x 7 inch
Resolution
800(H) × 480(V) (Contrast 700:1)
Brightness
350 cd/m2
Viewing Angle
R/L: 140 (Typ), U/D 140 (Typ)
LCM-209-3G
Panel
TFT LCD Panel 2 x 9 inch
Resolution
800(H) × 480(V) (Contrast 700:1)
Brightness
350 cd/m2
Viewing Angle
R/L: 140 (Typ), U/D 140 (Typ)
LCM-119-3G
Panel
TFT LCD Panel 19 inch
Resolution
1366(H) × 768(V) (Contrast 700:1)
Brightness
300 cd/m2
Viewing Angle
R/L: 178 (Typ), U/D 178 (Typ)
LCM-123-3G
Panel
TFT LCD Panel 23 inch
Resolution
1920(H) x 1080(V) (Contrast 1000:1)
Brightness
300 cd/m2
Viewing Angle
R/L: 178 (Typ), U/D 178 (Typ)
LCM-132-3G
Panel
TFT LCD Panel 32 inch
Resolution
1920(H) X 1080(V) (Contrast 1000:1)
Brightness
300 cd/m2
Viewing Angle
R/L: 178 (Typ), U/D 178 (Typ)
LCM-147-3G
Panel
TFT LCD Panel 47 inch
Resolution
1920(H) X 1080(V) (Contrast 4000:1)
Brightness
450 cd/m2
Viewing Angle
R/L: 178 (Typ), U/D 178 (Typ)
LCM-3G SERIES
2) Supported Signals
Supported Signals
Serial Digital Interface
SMPTE-425M 1920x1080P(50/60)
SMPTE-274M 1920x1080i (50/60),
1920x1080P(24/25/30)
SMPTE-296M 1280x720P (50/59.94/60)
SMPTE-125M(480i/59.94), ITU-R
BT601(576i/50)
HDMI
DVI-D
H Frequency Range : 20~82 kHz
V Frequency Range : 55 ~ 90 Hz
Maximum resolution :1920x1080 60Hz
Maximum pixel rate : 162 MHz
DTV mode support : 720P, 1080i, 1080p
ANALOG RGB
H Frequency Range : 20~82 kHz
V Frequency Range : 55 ~ 90 Hz
Maximum resolution : 1920x1080 60Hz
Maximum pixel rate : 162 MHz
DTV mode support: 720P/1080i/1080p
ANALOG Component
(DTV/DVD)
CVBS
SOG sync support
1080p
1080i
720P
480i / 576i
480P / 576P
NTSC/PAL/SECAM
LCM-3G SERIES
3) Supported Timings
PC & DVI input
Section
Resolution
H Frequency
( kHz )
V
Frequency
( Hz )
Pixel
Frequency
( MHz )
Comment
PC
640x400
37.861
85.08
31.5
640x350
31.469
70.087
25.175
640x350
37.861
85.08
31.5
640x480
31.469
59.94
25.175
640x480
35.000
66.667
30.24
640x480
34.940
69.884
28.513
640x480
37.861
72.809
29.765
640x480
37.500
75.0
31.5
640x480
43.269
85.008
36.0
640x480
45.540
90.0
37.889
720x400
31.469
70.087
28.322
720x400
37.927
85.039
35.5
800x600
35.156
56.25
36.0
800x600
37.879
60.317
40.0
800x600
43.764
70.02
45.513
800x600
48.077
72.188
50.0
800x600
46.875
75.0
49.5
800x600
53.674
85.061
56.25
800x600
56.880
90.0
60.065
832x624
49.726
74.551
57.284
1024x768
48.780
60.001
64.11
1024x768
48.363
60.004
65.0
1024x768
56.476
70.069
75.0
1024x768
57.703
72.039
78.476
1024x768
60.241
74.927
81.724
1024x768
60.030
75.029
78.75
1024x768
68.677
84.997
94.5
LCM-3G SERIES
1024x768
72.810
90.0
100.187
1152x864
53.700
60.0
81.624
1152x864
62.932
69.924
96.663
1152x864
67.500
75.0
104.993
1152x870
68.681
75.062
100.0
1152x900
61.846
66.0
94.787
1152x900
72.713
76.047
105.561
1280x720
47.760
60.0
74.481
1280x720
52.500
70.0
89.040
1280x720
54.072
72.0
91.706
1280x720
56.400
75.0
95.654
1280x768
60.150
75.0
102.977
1280x960
60.000
60.0
102.104
1280x960
59.640
60.0
102.104
1280x1024
63.337
59.978
108.18
1280x1024
63.981
60.02
108.0
1280x1024
64.754
60.06
108.992
1280x1024
63.600
60.0
108.883
1360x768
47.700
60.0
84.700
1600x1200
75.000
60.0
162.000
DTV
720x480
15.735
59.94
13.500
Interlaced
720x576
15.735
50.0
13.595
Interlaced
720x480
31.469
59.94
25.175
720x576
31.250
50.0
26.566
1280x720
44.964
59.94
74.176
1280x720
37.500
50.0
60.466
1920x1080
33.750
60.0
74.25
Interlaced
1920x1080
28.125
50.0
70.723
Interlaced
1920x1080
31.250
50.0
72.000
Interlaced
1920x1080
67.5
60
148.5
Progressive
LCM-3G SERIES
16.
MECHANICAL DIMENSIONS
LCM-207-3G
LCM-209-3G
LCM-3G SERIES
LCM-119-3G
LCM-123-3G
LCM-3G SERIES
LCM-132-3G
LCM-147-3G (TBD)
Loading...