Plum Mobile Link Installation Manual
USER MANUAL
Google Play Installation Guide
Google Play Installation Guide
1. Download the Google Play apk file (Please select any one of
the download link as below)
Link 1: http://download.steachs.com/Vending.apk
Link 2: http://www.mediafire.com/?wwcqrlfwt8o1gnv
Link 3: http://www.mediafire.com/?071li 69rh7x3yhh
2. Save the file in the memory card or selected location in the
tablet.
3. As the file is from unknown sources, please go to Settings »
Security and enable “Unknown sources”.
4. Locate the file in the File Manager HD and tap on it — to
begin installation procedure and it will be installed in less
than a minute.
Attention:
This handbook contains important security measures and the information for correct
usage of the product in order to avoid accidents. Please make sure to read the
manual carefully before using the device.
Avoid exposure to moisture and dust
Avoid exposure to high temperature do not keep the device on the
dashboard of the car specially when the windows are closed.
Avoid fall or violent shaking of the device This could cause damage to TFT
display screen
Please choose appropriate volume, if using headphones volume should not
be too high
Please charge the device in the following conditions,
A. The battery power ICON indicates low or no power
B. The system automatically shuts off, as soon as device is started
C. Operation buttons do not respond
D. The icon at the top right corner turns red
.When the device is being formatted or during uploading and downloading of
files, please do not suddenly disconnect as this can cause application error
Do not use the device in places where use of electronic devices is prohibited
e.g. during flights
Don’t disassemble the product, don’t use alcohol Thinner or benzene to scrubbing
products
Please do not use the Tablet PC when you in driving or walking
USB must be used only for data transmission
The company reserves right to improve product, products specification and
design and make any changes without prior notice.
This tablet is not waterproof
[Remark.] : All images in this manual is only for your reference. products
specification and design may differ. The information is subject to changes without
prior notice.
1. Appearance and button:
1.1 Touch panel
Capacitive touch panel: In The Operation, for clicking ,dragging on the touch
panel
1.2 POWER
Startup: Long Press and hold the power button, the system will enter the main
interface
Shutdown: In the main menu interface, Press the power button for about 5
seconds to shutdown, The system will display "power off" option, Click ”ok”. To
safely shut down.
Lock screen: Short press Power button to lock or unlock screen.
Remark 1.When power is empty, system will shut down automatically.
2.In case of improper turn off of the device, restart may take
longer time as it will scan and restore the disk
1.3 ESC
Short Press of ESC button will return to the last interface, long Press ESC button
will return to the main interface
1,4 Menu
Under normal operating conditions, short press of M button will bring you back to
the home screen
1.5 Volume +, Volume the
Use buttons on top “ Volume +”, “Volume- “ to achieve changes in the volume.
1.6 Earphone jack
3.5 mm standard earphone jack
1.7 Video output interface
1.8 TF card
TF-CARD slot: external T-FLASH card
1.9 Mini USB
Mini USB jack: you can use it to connect the computer for data transmission,
charging and external connection USB flash drive
1.10 Reset
When the Tablet seems to have hung up or has stopped taking commands , use
a small object to short press RESET button, Tablet will be forced to shut down.
.[Remark.]: unless actually unable to shutdown do not use the reset, methods as
this can easily cause to damage the machine system.
2. First use
2.1 Battery management and charge
Before first use, please fully charge the device's battery
For charging you only need to connect the adaptor or USB interface to power
source, On the first two instances charge battery for about 6 hours, subsequently4
hour charging will suffice.
.[Remark].: This tablet uses its Built-in type polymer battery, Charging device
must be a standard adaptor (Input: AC110~240V 50/60Hz Max:180MA.. Output:
DC5.0~5.5V/1.5-2.0A), This device can be charged without DC supply , using USB
interface , for this , Choose USB interface to charger During the charging, the battery
icon will scroll, When finished charging, battery icon will become green and stop
scrolling. In order to prolong the service life of the machine, suggest use out battery
power before again charging it
.[Remark]: 1. If tablet is not in use for long time, ,in order to avoid power
consumption caused damage please charge/play the battery once a month,.
2 .When battery is low ,shut down device ,connect DC adaptor , wait for some time
until the battery is enough power to enter into main menu.
3. While charging please keep devise in standby mode for faster charging.
2.2 Connection with PC
Use USB cable to connect device to PC, device will pop up the USB connection
window, click “Turn on USB storage” to connect to PC
Into the load mode, you can copy, delete the file on the device and the file on the
memory card
Loading...