Plumbline M007, M002ES, M002, M006, M033 Installation Instructions Manual
...
INSTALLATION INSTRUCTIONS
MINIMO BASIN MIXER | M002
MINIMO BASIN MIXER WITH ENERGY SAVER | M002ES
MINIMO VESSEL BASIN MIXER | M006
MINIMO SQUARE WALL MOUNT MIXER | M007
MINIMO SHOWER MIXER | M033
MINIMO DIVERTER MIXER | M034
303
ø48
ø 35
Ch.36
340
G 3/8”
Max 45
180
143
ø48
250
ø 35
Ch.9
350
M006
G 3/8”
240 x 100
115
10°
92
ø 63
Max 35
Max 180
62
G 1/2"
Min 45
Max 75
M007
Min 35
G 1"1/4
180
50
x
Ma
M002 / M002ES
G 1/2"
G 1/2"
Min 45 - Max 75
G 1/2"
115
G 1/2"
G 3/4"
Min 45
Max 75
M033
M034
WARNINGS
- The plumbing installation should be fitted with adequate water filters and pressure regulation devices in order to avoid misfunctioning in case of pressure shocks
- Advised pressure is between 3 and 5 bars
- Flush pipelines thoroughly before installing mixers
- Clean the mixers with soap mixed with water; products must be dried with a soft cloth in order to prevent limescale deposits
- Limescale deposits or other impurities in filters of flow guides must be removed monthly by using appropriate products or by immersing in water/vinegar solution
(80/20)
- For each mixer installation, please follow instructions in corresponding page
100 x 100
100 x 165
WARRANTY :
Distributed by:
T 04 568 9898 E sales@plumbline.co.nz www.plumbline.co.nz
SHOWER/DIVERTER MIXERS
WALL MOUNT MIXERS
M007
Hot
Cold
- When installing the concealed part of the mixer, please observe the given centre-to-
wall distances shown on the drawing and printed on the mixer protecting cover.
- Remove protecting cover and insert flange
- Install handle following the 'handle installation' instructions on the page aside.
DIVERTER REPLACEMENT
3
1
2
- Remove handle. Remove cover plate (1).
- Push knob (2) against seat. Without releasing pressure, unscrew knob
- Unscrew diverter (3) using a 19 mm spanner
- We recommend to replace the entire diverter unit and not separate components
Loading...