Page 1
Enclume Carrier Bag Rack
LR10
Enclume hearth racks are the ultimate in
Quality, design, strength and function.
Congratulations for owning one of the finest
Storage racks made.
WARNING:
READ ALL OF THE INSTRUCTIONS
BEFORE ASSEMBLING AND USING
YOUR RACK.
Enclosed you will find everything needed for the assembly
and use of your hearth rack. Two people make assembly
and installation easier. The parts and hardware included are:
1-- Rack upright 6—3/8” x 5/8” Button head screws
2-- Long legs 1—7/32” Allen wrench
2 --Short legs 4 –Hard floor gl ides
1 Cloth carrying bag (may be sold separately)
ASSEMBLY INSTRUCTIONS
1) Slip the floor glides over the ends of the short legs.
2) Place the two long legs over the top of and perpendicular to the two short legs. Attach them together with four of the button
head screws. The screws should be inserted from the top down toward the floor. Tighten the screws only finger tight.
3) Using the two remaining button heads attach the rack upright in the center and on top of the leg assembly.
4) Square up the rack and tighten all the screws.
5) Place the cloth bag into the upright. Seat the strapping handles into the upright flares.
6) To clean your rack, use a damp cloth and dry it thoroughly. If a touch-up is ever necessary, remove any dirt or rust with steel
wool and re-coat with a “Pledge” like wax product.
WARNING
Limited Warranty:This product is warranted to be free of material defects for a period of five year from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339, postage prepaid
within 20 days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being provided to the
customer by Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PORPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
If you need help, please call 1-877-ENCLUME
Enclume Design Products, Inc.
24 Colwell Street, Port Hadlock, WA. 98339
Phone 360-385-6100 • Fax 360-385-6156
www.enclume.com
Loading...