Plextor 8PL-4 User Manual

Page 1
---- CHAPTER 13 ----
Contacting Plextor’s
Technical Support
Department
YOUR TASK: Learn the variety of methods you can use to contact
Plextor’s Technical Support Department. Learn what information you should gather before contacting Plextor’s Technical Support Department.
YOUR OBJECTIVE: Know how to get in contact with Plextor if you
YOUR METHOD:
If you experience a problem while installing or operating your 8PleX drive, please
refer first to the troubleshooting chapter (Chapter 12) in this manual. It contains
solutions to the most common types of problems fielded by our technical support staff. Our Technical Support Department will help you solve problems that relate specifi-
cally to your 8PleX drive. In many cases, a problem that appears to be caused by your CD-ROM drive actually originates in another part of your computer. In such instances, our technical support staff will try to help you identify the part (e.g., SCSI interface board) at fault, and will refer you to the manufacturer of that part for further assistance.
Although we think highly of the capabilities of our technical support staff, we recognize that they do suffer from some limitations; namely, they do not possess psychic or telepathic powers. Therefore, their ability to help you depends a great deal on your ability to help them. You must act as their eyes and ears as they try to diagnose and fix your problem. If you gather the information requested on the following page before your call, you will find that your problem can be resolved much more quickly.
Plextor’s Technical Support Department is available Monday through Friday, 6:30 a.m. to 5:30 p.m., PST. We are closed on weekends and some holidays.
Store Plextor’s phone, fax, and BBS numbers in a convenient location. Keep your drive’s serial number and a copy of your sales receipt handy, as well.
PX-83CS/PX-85CS OPERATION MANUAL 61
Page 2
How to Contact
There are three ways for you to contact Plextor’s Technical Support Department:
1) Call 800-886-3935 and select the technical support extension.
2) Send a fax to the attention of the Technical Support Department at 408-986-
1010. Include your telephone number and the hours during which you can be reached. Be as detailed as possible in describing your problem. It typically is useful if you also send a printout of your
3)
Send us e-mail at
4) Log on to our BBS (2400/9600/14.4/28.8/MNP, V.42bis) at 408-986-1569. You will find a great deal of useful information and software on our BBS. It includes:
Device drivers for various SCSI interface boards and soundboards (available only to those who have purchased these boards directly from Plextor).
Utilities to enhance the operation of your drive.
Discussions of various technical problems you might encounter,
with suggestions as to how you might fix or circumvent them.
In addition, you can upload questions you have about the installation or operation of your 8PleX drive. A member of Plextor’s technical support staff will respond to your question either by phone or modem.
support@plextor.com.
AUTOEXEC.BAT and CONFIG.SYS files.
Before You Call/FAX/Log On
Please gather as much of this information as possible: The serial number of your CD-ROM drive (your serial number can be found both
on the warranty card that accompanied the drive and on a label on the drive itself).
The name and model number of your SCSI interface board (e.g., Future Domain
TMC-1610, Adaptec AHA-1515, Trantor T-130).
The version of the software device drivers that came with your SCSI interface board
(this typically is found on the label of the floppy disk which contains the device drivers).
The version of the Windows, DOS, Mac, Novell, OS/2 or Unix operating system
you are using.
The brand name and model number of your computer (e.g., Dell 466/NP, Micron
P66PCI Powerstation, ALR Evolution V, Apple Macintosh Performa 575).
62 PX-83CS/PX-85CS OPERATION MANUAL
Page 3
CHAPTER 13 ---- Contacting Plextor’s Technical Support Department
The type of VGA, Super VGA or other graphics card you use.Brand name and model number of any other peripherals you have installed/
connected to your computer (e.g., scanner, fax board, network board).
Returns
You must receive an RMA (Returned Materials Authorization) number from the Technical Support Department before any Plextor CD-ROM drive can be returned for repair or replacement. Any drive sent to Plextor without an RMA number will not be accepted. Drives must be sent postage prepaid. We recommend that you insure your shipment, as Plextor cannot be held responsible for any damage that may occur during shipment.
Helpful Contact Phone/FAX/BBS Numbers
COMPANY
Product 800 PHONE PHONE FAX / BBS
Adaptec 959-SCSI 408-945-8600 408-262-2533 / 408-945-7727
SCSI interface boards
AMC 882-0587 206-882-0587 206-861-8391 ----
Audio cables
Always/Basin Comp. 238-4453 818-597-1400 818-598-0110 / 818-597-0275
SCSI interface boards
Diamond 468-5846 408-736-2000 408-325-7070 / 408-524-9301
Soundboards
DPT 322-4378 407-830-5522 407-260-5366 / 407-830-1070
SCSI interface boards
DTC ---- 408-942-4000 408-942-4052 / 408-942-4010
SCSI interface boards
Future Domain ---- 714-455-8100 714-253-0429 / 714-253-0432
SCSI interface boards
FWB ---- 415-325-4392 415-833-4653 ----
Mac device drivers
Pacific Inter Connects 934-2839 408-654-0234 408-982-9329 ----
Audio cables
Plextor 886-3935 408-980-1838 408-986-1010 / 408-986-1569
Recommend SCSI soundboards, audio cables and all other technical support needs
Trantor (see Adaptec listing)
SCSI interface boards and Mac device drivers
PX-83CS/PX-85CS OPERATION MANUAL
63
Page 4
---- CHAPTER 14 ----
Specifications
PX-83CS Internal PX-85CS External
Disc
Useable Formats CD-ROM Mode 1; CD-DA; CD-ROM Mode 1; CD-DA;
CD-I; Video CD (MPEG); CD-I; Video CD (MPEG); CD-ROM XA Mode-2, CD-ROM XA Mode-2, Form 1, Form 2; Photo CD Form 1, Form 2; Photo CD
CD Plus; CD-G, Karaoke CD Plus; CD-G, Karaoke Disc Diameter 12 cm. (60 min. & 74 min.) 12 cm. (60 min. & 74 min.) Rotational Speed at 8X Inner Track: 4240 rpm Inner Track: 4240 rpm
Outer Track: 1600 rpm Outer Track: 1600 rpm
Performance
Data Transfer Rate Sync Async
Access Speeds: Full stroke One-third Stroke Random Access Random Seek
Data Buffer 256 KB 256 KB Optical Pickup
Laser Slide Mechanism Spindle Motor
Error Rate Mode 1: 1 Block/1012 Bits; Mode 1: 1 Block/1012 Bits;
Front Panel
Indicator (LED) DISC IN; Power ON/BUSY DISC IN; Power ON/BUSY Disc Loading Manual; standard caddy Manual; standard caddy Headphone Jack Stereo mini-jack, Stereo mini-jack,
Volume Control Wheel Knob Wheel Knob Play Button Play, Forward, Skip Play, Forward, Skip Stop/Eject Button Stop, Eject Stop, Eject
1200 KB/sec.; 1200 KB/sec.;
Burst: 10 MB/sec. Burst: 10 MB/sec.
Burst: 5.0 MB/sec. Burst: 5.0 MB/sec.
220 ms 220 ms
150 ms 150 ms
115 ms 115 ms
95 ms 95 ms
Semiconductor Semiconductor
Linear Motor Linear Motor
Brushless Brushless
9
Mode 2: 1 Block/10
0.9V at 32 Ohms 0.9V at 32 Ohms
Bits Mode 2: 1 Block/109 Bits
64 PX-83CS/PX-85CS OPERATION MANUAL
Page 5
CHAPTER 14 ---- Specifications
PX-83CS Internal PX-85CS External Rear Panel
Power Supply DC +5V, 0.7A (0.9A Peak); AC 100-240V 50/60 Hz.,
DC +12V, 1.0A (1.7A Peak) 0.3A (Auto Switching) Power Switch ---- Tumbler Type: 3A, 250V Interface Connector SCSI, 50-Pin SCSI, Two 50-Pin
Header Type High-density connector Audio Output Analog Output, Analog Output, RCA Jacks
Molex Connector
(P/N 50083-8014 4-pin)
Use Molex Housing
(P/N 51030-0430 4-pin) Jumper Switches SCSI ID, Term, Parity, ----
Test, Block, Eject DIP Switch ---- Term, Parity, Test
Block, Eject
Rotary Switch ---- SCSI ID
Environmental Conditions
Operating Temperature 0 to 45 degrees Celsius 0 to 45 degrees Celsius Humidity 20 to 80% 20 to 80%
Noncondensing Noncondensing Storage Temperature --40 to 60 degrees Celsius --40 to 60 degrees Celsius Humidity 5 to 95% 5 to 95%
Noncondensing Noncondensing
Dimensions and Weight
Dimensions (W/H/D) 5.75" x 1.63" x 7.95" 7.0" x 2.24" x 12.03" Weight 2.4 lbs. 5.7 lbs.
Reliability
MTBF 100,000 POH 100,000 POH Caddy Loading 200,000 Times 200,000 Times
PX-83CS/PX-85CS OPERATION MANUAL
65
Loading...