Playvision HBT-914H100 User Manual
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully before connecting,
operating or adjusting this product. Please keep this manual fo
r future
reference.
I
The
extending your HDMI signal over
long distances to a compatible display. It is designed to convert HDMI
signal to standard HD
ransmit by Internet cable. It
also support
Transfer Bidirectional Infrared control signal together
with the HDMI signal, so you can control the Source in the Sink side
which is 100 meters outside, also you can control the Sink in the
Source side which is
II
1.
2.
3.
HD BaseT 1x4 Splitter
With EDID Control
User manual
. Introduction
Splitter is a tool for splitting and
BaseT signal and t
s
100 meters outside using the Splitter.
. Features
Compliant with HDMI1.4, HDCP 1.2 and DVI 1.0.
Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24
bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit.
Supports LPCM 7.1CH, Dolby True HD, and DTS-HD Master Audio.
4.
Operates for TMDS clock frequencies up to 300MHz.
5.
6.
7.
8.
9.
10.
III
1.
2.
3.
4.
5.
6.
IV
1.
2.
3.
4.
5.
6.
POE(Power Over Ethernet)function support, splitter powered
12V@5A, the 4 receivers don’t need power form the DC jack. POE
Power Consumption less than 40W.
Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to
achieve long distances transmission.
UTP cable termination follows the standard of IEEE-568B.
Transmission distance:
100 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;
70 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit;
3D 1080P@60Hz@36bit; 4K x 2K@30Hz@24bit.
Supports EDID control via EDID selector.
Transfer Bidirectional Infrared control signal together with the
HDMI signal.
. Package
HD BaseT Splitter -------------------------------------------------- 1PCS
HD BaseT Receiver(HBT-E100 RX) ---------------------------- 4PCS
Wideband IR Tx ---------------------------------------------------- 5PCS
Wideband IR Rx ---------------------------------------------------- 5PCS
12V5A DC Power Supply adapter ------------------------------ 1PCS
Operation Manual ------------------------------------------------- 1PCS
. Specifications
Frequency Bandwidth 2.97Gbps
HD BaseT Splitter Input/Output Ports 1x HDMI Female port/4 x CAT6
1x IR Transmitter/1x IR Receiver
HD BaseT Receiver Input/Output Ports 1 x HDMI Female port/1 x CAT6
1x IR Transmitter/1x IR Receiver
Power Supply DC 12V 5A
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm) Splitter: 115(W) X 270 (D) X 45 (H)
Receiver: 65(W) X 100 (D) X 25 (H)
7.
Weight Splitter: 900g
8.
9.
10.
11.
12.
V
Splitter
1.
2.
LED illuminate when the device is
3.
4.
5.
6.
7.
Receiver: 200g x 4
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20 ~ 90% RH (Non-condensing)
Power Consumption (Max) 60W
. Operation controls and Functions
POWER SWITCH: Power ON\OFF Switch.
POWER LED: This blue
connected with power supply.
IR IN: Supper IR Control System Over LAN Cable IR Receiver.
Source to SINK, plug Wideband IR Rx into this unit.
※
See the description 1.
IR OUT: Supper IR Control System Over LAN Cable IR Transmitter
SINK to Source, plug Wideband IR Tx into this unit.
※
See the description 2.
EDID Selector: Select output signal format via EDID Selector.
※
See the description 3.
OUTPUT Area: Four RJ45 Jacks provide Standard HD BaseT
signal output. Four red LED illuminate when the Receiver is
connected with LAN cable.
INPUT Area: HDMI Input port. Connect source with HDMI cable.
Loading...