Playskool Speedstars Extreme Loop Track 06706 Instruction Manual

AGES 3+
06706
Thank you for choosing this awesome SPEEDSTARS playset!
Adult Assembly Required.
Extreme Loop
Track
Track
Includes 1 car body, 1 chassis, 2 loop pieces, 1 flexible track, 2 base pieces, 1 exit ramp, 1 power winder, 3 tower pieces and label sheet.
CAUTION:
Hair entanglement may result if child’s hair comes in contact with moving parts of toy. Adult supervision is required.
ASSEMBLY
1. Snap 2 base pieces
together (tabs into slots).
2. Snap 2 loop pieces
together.
3. Snap loop and base
assemblies together.
4. Fit lip on flexible track into top
slot on base piece (garage side). Press down arrow on track and fully insert lip into base piece.
6. Assemble 3 tower pieces: Snap
pins on legs into holes in tower ramp and snap bottom of legs together. (Listen for snaps to ensure proper assembly.)
7. Snap flexible track onto
tower.
5. Snap exit ramp onto base.
TTOOWWEERR RRAAMMPP
GGAARRAAGGEE
LLEEGGSS
8. Peel and apply labels as shown.
Snap the car body onto
the chassis…
Place the car onto the
power winder, hold the car in place and crank the handle until the car is fully wound (approximately 10-15 times)…
Push in latch on front of chassis
to remove car body from chassis.
Connect other track pieces
from SPEEDSTARS sets (not included) to the exit ramp!
PLAY FEATURES
Enjoy awesome thrills and spills with this stunt loop designed just for preschoolers!
Place the car on the
starting pad, press the button and watch it zoom around the loop!
Note: For best
performance, be sure the flexible track is straight.
LLAATTCCHH
EEXXIITT RRAAMMPP
GGAARRAAGGEE
PPRREESSSS HHEERREE
© 2003 Hasbro. All Rights Reserved. ® denotes Reg. U.S. Pat. & TM Office. Patent Pending 06706 P/N 6259820100
PLAYSKOOL.COM
FOR NEW PRODUCTS AND OFFERS
PLAYSKOOL.COM
FOR NEW PRODUCTS AND OFFERS
Questions? Call: 1-800-PLAYSKL
Press down arrow on flexible
track and insert track into base piece.
Flip down tower ramp
(flexible track remains attached).
Store the power winder on the
side of the base (posts on base into holes in power winder).
Store the car in the "garage"
inside the base.
Flip up the exit ramp.
STORAGE
Loading...