Playcore Colorado Time Systems Dolphin, Colorado Time Systems Dolphin K-DSS-1 Quick Start Manual

Dolphin Starter to Infinity

The Dolphin Starter to Infinity kit (K-DSS-1) contains:

• Adapter cable with locking mini BNC connection on one end and locking BNC connected
to a phone plug on the other

• Black holster which mounts on a microphone clip on the Infinity

• 1.5-inch square piece of hook and loop fastener for use if your Infinity only has one

microphone clip

If your Infinity Start System has two microphone clips:

Use the right microphone clip to hold the microphone, and the left to mount the Dolphin holster,
as shown in Figure 1.

Figure 1: Infinity with holster Figure 2: Infinity with Dolphin Starter in holster

Attach the cable and adapter between the Dolphin Starter and the Start Output jack on the
Infinity. NOTE: you must unlock the locking mini BNC connector when disconnecting from the
Dolphin Starter or you will damage your cable.

If your Infinity Start System has only one microphone clip:

Peel the back from the prickly side of the hook and loop fastener, and stick it on the Infinity in
the flat space under the handle, as shown in Figure 3. Peel the backing from the soft side of the
hook and loop fastener and stick it to the back of the Dolphin Starter (Figure 4), making sure not
to interfere with opening the battery cover.

Figures 3 & 4: hook and loop fastener on Infinity and on Dolphin Starter

Attach the adapter cable between the Dolphin Starter and the Start Output jack on the Infinity.

1551 E. 11th Street, Loveland, CO 80537 |[phone] | [phone] (fax) | 800-287-0653 | www.coloradotime.com |

[e-mail] | F920 Rev. 201905 Patent #7,821,876 and 8,085,623