PlayActive B28 Owner's Manual

• Suitable for 37~96 months

• Maximum user weight: 30kgs

• Adult assembly required

Please keep this manual for future reference as it contains important
information.
Before first time use, charge the battery for at least 4-6 hours.

OWNER'S MANUAL

Read and understand this entire manual before using!

CHILDREN'S

ELECTRONIC TOY CAR

Products features may vary

from the pucture above.

118 x 66 x 52CM

Use the vehicle on generally level ground ONLY!

caution

About Your New Vehicle

Thank you for your purchasing our products, we wants your child to enjoy this product for years to

come. Keep these points in mind as you read this guide:

FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND
ASSEMBLY/USE INSTRUCTIONS. KEEP THIS GUIDE FOR FUTURE REFERENCE.

• ADULT ASSEMBLY REQUIRED. The product contains small parts, which are for
adult assembly only. Keep children away when assembling.

• Always remove protective material and poly bags and dispose before assembly.

WARNING!

Suitable age:

37~96 months

6V10AH x1(Fuse: 10A)

Load Capacity:

Under 30KGS

Size of car:

Speed:

3KM/H

3~5KM/H

Power way:

Charging type

Charger:

Input: depend on local voltage
Output: DC 6V800mA or DC6V1A
or DC12V1A

Average
battery life:

Approximately
300 times

Charge time:

8-12 Hours

Battery &
Fuse:

1WD

2WD

1WD

1WD

2WD

2WD

IMPORTANT

WARNING

This label means the information or assembly for One Wheel Drive version ONLY!

This label means the information or assembly for Two Wheels Drive version ONLY!

CHOKING HAZARD - Small parts.
Not suitable for children under 37
months.

VER:SMS-B28-EN-130226

6V10AH x1 (Fuse: 10A), 12V7AH x1 (Fuse: 13A)

H/LSPEED

This label means the information for High/Low Speed version ONLY!

12V7AH x1 (Fuse: 13A and 5A)

H/LSPEED

1
2
3
4
5
6
7
8
9
10
11
12
13

14

15

16

17

18

1
1

8
4
1
1
1
1
1
2
2

1
x1
x2
x3
x2
x3
x2
x1
x2

x1
x2

1

4
x4
x8

1
2
2

12

A
B

C
D
E
F

Vehiclebody
Steeringcolumn

Ø12Washer
Ø10Locknut
Steeringwheel
M5x50machinescrew
Ø5Nut
Windshield
Seat
M5x20machinescrew
Sidesupport
Rearaxle
Drivingwheel

Wheel

Ø12bushing

Gearbox

Motorhood

Charger

4 pcs placed on the front axle,
4 pcs placed on the rear axle.

2 pcs placed on the front axle,
2 pcs placed on the rear axle.

Placed on the steering wheel.

Placed on the steering wheel.

Placed on the vehicle bdoy.

1 pcs labeled “R”, 1 pcs labeled “L”

REMARKS

Assembly package

2WD

PART NAME

Q’ty (pcs)

Hubcap

Ø4x12Screw

Ø10Washer
Splitpin
Spanner
Ø3.5x12screw

2WD

2WD

2WD

2WD

2WD

Parts List

E

1

2

3

3

A

B

C

D

C

F

5

7

8

9

10

11

12

13

15

17

16

18

14

4

6

Parts Diagram

Tools Required

Screwdriver(not included)

Spanner

Pliers(not included)

1

2

Assembly Steps

• Your new vehicle requires adult assembly. Please set aside at least 40 minutes for
assembly. Children can be harmed by small parts, sharp edges and sharp points in the
vehicle's unassembled state. Care should be taken in unpacking and assembly of the
vehicle. Children should not handle parts, or help in assembly of the vehicle.

• Please identify all parts before assembly and save all packaging material until assembly
is complete to ensure that no parts are discarded.

• Assembly tool for need: screwdriver(

not included) and spanner.

Ø12 Washer

Rear axle

Rear axle

●

Fit the side support to the vehicle

body.

(NOTE: If the side support does not
seem to fit, change the other one and
try again! )

●

Insert five Ø3.5x12 screws and

tighten with a screwdriver.

● Repeat for the other side.

Ø3.5x12 screws

Side support

● Turn the vehicle body downside
up.

●

Remove all the parts from the rear axle.

●

Slide a Ø12 washer onto the rear axle

from the longer end.

●

Insert the rear axle through the hole in

vehicle body.

2WD

● Turn the vehicle body downside up.

●

Remove all the parts from the rear axle.

●

Insert the rear axle through the hole in the

vehicle body.