plawa Scrivo.1 User Manual

User’s Guide

_ Product Specification and System Requirements

_ How to use scrivo.1

_ Bluetooth Installation and Configuration

_ scrivo.1 Driver Installation and Configuration

_ How to use following utilities Finger Note

TM

Thank You

Thank you for purchasing the scrivo.1. You have made an excellent choice for your next digital
input device. scrivo.1 is designed to be used for many functions with ease.

Contents

Trademarks

The following are registered trademarks of plawa-feinwerktechnik GmbH & Co. KG: scrivo.1, the
scrivo.1 logo, and plawa mobilities logo is a trademark of plawa. Other product names mentio-

ned in this guide may also be trademarks or registered trademarks of their respective owners.

Manual Notice

plawa reserves the right to make changes to this manual and to the equipment described herein

without notice. Considerable effort has been made to ensure that this manual is free of inaccura­cies and omissions. However, plawa makes no warranty of any kind including, but not limited to,
any implied warranties of merchantability and fitness for a particular purpose with regard to this
manual. plawa assumes no responsibility for, or liability for, errors contained in this manual or for
incidental, special, or consequential damages arising out of the furnishing of this manual, or the
use of this manual in operating the equipment, or in connection with the performance of the
equipment when so operated.

1. Description page 4

_ Features & Shipment Contents page 4

_ Specifications page 4

_ Bundle Software page 5

2. System Requirements page 6

3. Using scrivo.1 page 6

_ Correct way to hold scrivo.1 page 7

_ OCR (OCR: Optical character recognition) page 8

_ Example of using scrivo.1 page 9

4. Installing & Configuring Bluetooth page 11

_ Installation for Windows 2000/XP page 11

_ Update Bluetooth setting in Windows XP service pack2 page 21

_ Installation for Windows 98SE/ME page 25

5. scrivo.1 Driver and Software page 28

_ Installing scrivo.1 driver and utilities page 28

_ scrivo.1 Driver Setting page 29

_ Changing mode and usage page 32

6. Using Finger Note

TM

_ What is Finger Finger Note

TM

_ Finger Note

Basic Menu page 34

TM

? page 34

page 34

7. Troubleshooting page 38

8. Contact and Support page 39

2 3

1. Description

Software package

Make hand written notes, design and contol your desktop. Create MMS messages on a smart
phone and manage memos on a PDA.

Features

_ Optical navigation & mouse-hover technology
_ Portable and convenient: light and durable (perfect for notebook users)
_ Ergonomic design: Fits comfortably in your hand. No wrist pains after long hours of use.
_ USB connection: plug and play.
_ Includes application software which maximizes usage of scrivo.1 “Finger Note

TM

”

(Only for PC users).

Shipment Contents.

_ Scrivo.1
_ Charger (receiver)
_ Manual
_ Pad
_ Software Finger Note

TM

_ Driver CD

Specifications

_ Communication: Bluetooth
_ Frequency: 2.4 GHz
_ Range: Within 10 Meter radius
_ Resolution: 800 dpi
_ Connection: USB
_ Battery 3.7 V DC, 400 mA Li Polymer
_ Continuous usage time: 5 hours
_ Stand by usage time: 26 hours (80 hours in power saving mode)

TM

Finger Note

(Only for PC users)

Create memos and highlight text in any program. This program allows users to open Microsoft
PowerPoint, Word, Excel by slides. User can also save slides with created memos. (Image file for­mat). This program is very especially useful in presentations. (Refer to “Using Finger Note

TM

“).

Practical use in other Software programs*

_ Paint: It allows the user to draw or write in Microsoft Paint in Accessories, something which

users cannot do using a typical mouse.
_ Windows XP or Office XP installed on PC: Practical uses XP´s handwriting recognition (OCR).
_ Practical use in graphic programs in with other tablet systems.

2. System Requirements

scrivo.1 requires the following minimum system configuration:

_ Pentium II 400MHz or equivalent
_ Operating System: Windows 98SE/ME/2000/XP, Mac O 9.2-X
_ System Memory: At least 32MB or above
_ Hard Drive: At least 11.5MB available memory
_ HID Support with USB port

* PC without USB ports cannot be used.
* Requires 3rd party software when you use it on a PDA or mobile phone. (Not included)

scrivo.1

_ Size: 157 (L) x18 (B) x30 (H) mm
_ Weight: 40 g
_ Power: 3.7 V rechargeable Battery

Charger:

_ Size: 108 (L) x 49 (B) x 42 (H) mm
_ Weight: 100 g (including wire)
_ Cable length: 1.7 m
_ Power: USB power (DC5V)

4 5

3. Using scrivo.1

Correct way to hold scrivo.1

scrivo.1 has a power switch, two function buttons, and two indicators.

Power switch

Status-LED

Battery indicator

Pairing Button

Second button

First Button

Power switch

Turn the power ON/OFF using this switch located on the bottom of the pen. Power switch must
be in the ON position before use. Switch to the OFF position if it’s not in use for a long period of
time.

Pairing Button

Reset the pen to initial stage. After successful initiation, Status LED light will blink green
continuously.

When using a typical ballpoint pen, you can
write on a paper regardlessof how you hold the
pen. On the other hand, if you hold a fountain
pen and rotate its pen tip to an upright posi­tion, you cannot write at all since the tip of a
fountain pen has a different structure to that of
a typical ballpoint pen. Similarly, the performan­ce of scrivo.1 greatly depends on how you hold
it. As a result, when you try to write a memo
or draw a simple graph with scrivo.1, holding it
incorrectly may result in unexpected output
such as rotated letters, tilted axis and so on.
Therefore, you should be careful when you hold

scrivo.1

.

The Ccorrect way to hold scrivo.1 is shown in the pictures below. The forepart, where the push
button is attached, should face the front

Front View Side View

First button (pen-tip button)
Located on the end of scrivo.1 and has same function as the left button on a typical mouse.

Second button (Jog button)

Located on the front top of the pen and has same function as the right button on typical mouse.
When you scroll the Jog switch, it will work like the mouse wheel scroll feature.

Status-LED

1) Green LED -> indicates status between Pen and Charger is ok.

- Blinking continuously: Initiating stage for pairing. (Blinking for the first 3 mins remain lit after
3 mins)

- No LED light: Complete Pairing Status.

- Continues to blink in 1-2 sec. interval: Power to receiver has been interrupted

2) Red LED – Check battery status

- Need to recharge scrivo.1 when red LED blinks (continues to be usable for 30 mins)

Battery indicator

Red LED during charging and green LED when fully charged. Total charging time: 3.5 hours.

6 7

If the angle of scrivo.1 and the surface is too low as shown in the figure (a), or if its forepart
does not face to the front as shown in the figure (b), (c), and (d), it will not perform correctly.

(a) Angle of pen and surface
is too low.

(c) scrivo.1 is reversed. (d) scrivo.1 is turned to left.

(b) scrivo.1 is turned to right.

OCR (Optical Character Recognition)

Changing Pen Tip

If users´ PC has Windows XP or Office XP installed, they will be able to use their OCR programs
to convert their users own handwriting to text or save it as a picture file. (Handwritten to text
conversion will not be supported if OCR isn’t Windows XP and Office XP or above isn’t installed.)

For those environments that support OCR programs, IME pad is located on the task bar and can
be launched by clicking the icon (IME Pad). Users can write or draw using this function.

If the task bar isn´t visible, click the Windows
key – located on the bottom left of your key­board, to enable the task bar.

To use the OCR function in Windows XP, open “Regional and Language Options” in the “Control
Panel” and click Details in the “Languages” tab to open the “Text services and input languages”
dialog box where you can add OCR function.

scrivo.1´s pen tip is designed to withstand abrasion. However for best results, the pen tip needs
to be replaced after it has been used for a long period of time.

_ First, prepare one of the tips included with
scrivo.1.

_ Hold the tip and pull towards arrow shown in
the figure on left (Use pincer or pliers for your
convenience).

_ Insert the new tip into the now empty space.

_ Place the pen on a hard surface and gently
press the tip.

Example of using scrivo.1 (Only for PC users)

_ OCR function (MS Office XP or above)

Converting handwriting into text using Office XP.

_ Finger Note

TM

If Windows XP is not installed but has Office XP or above, open “Text service” in the “Control
Panel” to add OCR function.

Mouse Pad

scrivo.1 is designed to work on most surfaces except surfaces made out of materials that don’t

reflect lasers such as glass or white paper. Use the pad included for optimum results for writing,
drawing and other mouse function uses.

Taking memos directly on the desktop using Finger NoteTM.

8 9

_ Using in Microsoft Paint or as a graphic tool

scrivo.1 can be used in graphic software programs such as Corel Painter, PhotoShop,
PaintShop, Microsoft Paint: www.corel.com / www.adobe.com / www.jasc.com

_ Using in Microsoft OneNote

_ Correction function in Word documents

Using correction function in Microsoft Word. Practical use in document-creating applications
such as Microsoft Excel, Power Point, etc.

_ Input signatures

Input signatures in MS Word, PDF files, and other documents.

Microsoft OneNote is a program with wich you can input not only with the keyboard, but also

with a pen.

4. Installing and Configuring Bluetooth

4.1 Windows 2000/XP Environment

Please install/configure in the following order
_ Bluetooth Software (BTW) Installation
_ Connect charger to your computer
_ Bluetooth Configuration

Software Installation

1) Windows Installer will automatically run when you insert the CD into CD/DVD ROM drive. If
Windows Installer does not run automatically, use Windows Explorer to find the Setup.exe file on
the CD to launch the setup program. Click (Next) to continue software installation.

10 11

2) Please read the License Agreement carefully and choose “I accept the terms in the license
agreement”. Then click [Next] to continue setup.

5) The following picture shows the installation process.

3) Assign a Destination folder for Bluetooth software. We recommend you leave the default.
Click [Next] to continue with the next step.

4) The following window appears when ready to install. Click (Install).

6) During the process, you might get a message as shown below. This tells you that you currently
do not have the Bluetooth signature program, but you can continue with installation without any
problems.

During the process, you might receive warnings as shown below. However, these will not harm
your computer in any way. You may continue with installation.

12 13

7) Checks whether hardware installation is completed or not. If you want to install hardware later,
simply click [Cancel]. Always, install software first and then hardware.

Connect charger to your computer

Bluetooth software installation is complete. Lastly, you need to connect pen and cradle with confi­guration.

1) Connect your charger to an available USB port.

2) “Found New Hardware Wizard” window will open once hardware setup is completed and will
search for “CSR USB Bluetooth Device”.

8) Click (Finish) to complete the software installation.

9) Restart your computer after completion.

Windows 2000 Windows XP

3) When the new device is detected, the [Add Hardware Wizard] starts automatically. Select
[Automatic Installation (recommended)] and click [Next] to proceed.

(This process may take place automatically depending on your OS or user setting, and you may
not have to do it manually. If so, simply proceed to the next step)

4) “Setup Wizard” will automatically set the selection list of installation program and copy the
necessary files to the system. Click [Finish], and run “New Device Wizard”. The Bluetooth icon
will be created in the System Tray after the installation has successfully finished.

Depending on your system specification, you may or may not get a ‘restart’ message. If you don´t,
you have to restart your system.

14 15

Bluetooth Configuration

After hardware installation is complete, you need to configure the Bluetooth connection. This pro­cess is required in Bluetooth technology different from previous version such as IR or RF techno­logy.

1) The following is a basic Bluetooth setup process. If the “Initial Bluetooth Configuration
Wizard” does not appear, double click the “My Bluetooth Places” icon to run the basic Bluetooth
software setup process. Click [Next] to continue the process when the Wizard asks to add the
icon on the system.

2) Click [Next] after entering the computer name and type.

4) The following is the list of Bluetooth services. In this case, scrivo.1 does not require any of the
services so you can uncheck everything and click [Next] to continue with the next installation.

5) Click [Skip] to continue when you see the following message.

6) When configuration is complete, you will see the following message. Simply click [Finish].

3) Click [Next] to start the wizard.

16 17

7) When you are done with configuration, double click [My Bluetooth Places] on the desktop. Or
right click the Bluetooth Icon in the taskbar to run [Explore My Bluetooth Places].

8) Turn on the scrivo.1 switch after you have completed previous steps.

You can select [Bluetooth] -> [Search For Devices] from the menu instead of [Find Bluetooth
Devices].

Power switch

Status-LED

If you turn on the switch, the Green LED will blink rapidly.
This means that the pen is connected. If the LED light
blinks slowly or is not blinking at all, push the pairing but­ton so that the LED light blinks faster. You can use a ball­point to push the paring button.

9) When your pen is connected, run [Find Bluetooth Devices] in [My Bluetooth Places].

Pairing-Button

If you run [My Bluetooth Places] and get the following picture, simply select [Bluetooth] ->
[Search for Devices] from menu the in order to find it.

10) After you search for devices, you see the scrivo.1 icon as shown in the following picture.
Double click this logo icon7. If you still don’t see the icon, go back to step 3, try pairing correctly
and search again.

18 19

11) After you double click the icon, a window will pop up and ask for your confirmation. Click (Yes).

12) After device installation is complete, you will see a green arrow next to the icon. This is the
final step and you will be able to move scrivo.1.

4.2 Update Bluetooth setting in Windows XP service pack2

1. Please check the Bluetooth Device is already in the “Device Manager”, as shown on the
following image.To open the “Device Manager”, please follow the following steps: Press the right

mouse button on the Desktop, press “My
Computer“ and then “Properties“. Open the
option “Hardware“. You will see the button to
open the “Device Manager“.

2. If you installed Windows XP service pack2 and the device is installed correctly, the Bluetooth
icon will be displayed as shown in the next image.

You can check your connection status by looking at the Bluetooth icon in the system tray
on the bottom right.

Enable (started) White

Disabled (stopped) Red

Connected Green

Once you complete these steps, you do not need to go through them again unless you switch
your computer. These settings will remain even after you restart your computer.

3. After installing the Bluetooth device correctly, click the Bluetooth icon and select “Open

Bluetooth Settings”.

20 21

4. After step number 3, you will see a new window as shown below. Select “COM Ports” and
then click the “Add” button for adding COM
Ports.

6. Select “Options” in the Bluetooth Devices Window and then check the correspondent boxes as
shown below.

7. Select “Devices” in the Bluetooth Devices Window and then click the “Add” button for adding
the device.

5. In the Add COM Port window, select the “Incoming” button and click “OK”, as shown above.

22 23

The window with the added COM ports will
appear, as follows. You can check your connec­tion status by looking at the Bluetooth icon in
the system tray on the bottom right.

8. When the window “Add Bluetooth Device Wizard“ is displayed, turn on scrivo.1´s power
switch and pair it with scrivo.1´s cradle (receiver). Then, click “Next”.

9. The system will search for the device. If the system can not find the device, push the pairing
button, and then click “search again“.

10. After completing the search, select the option “Don't use a passkey“. Then click “Next”.

4.3 Windows 98SE/ME Environment

Please install/configure in following order
_ Bluetooth Software (BTW) Installation
_ Connect charger to your computer
_ Bluetooth Configuration

Software Installation

1) Windows Installer will automatically run when you insert the CD into your CD/DVD ROM drive.
If Windows Installer does not run automatically, go to Windows Explorer to find the Setup.exe file
on the CD to launch the setup program. Click [Next] button to continue software installation.

2) Please read the License Agreement carefully and choose “I accept the terms in the license
agreement”. Then click [Next] to continue the setup.

11. Finish adding the Bluetooth device by clicking “Finish”.

3) Assign a Destination folder for Bluetooth software. We recommend you leave the default. Click

[Next] to continue with the next step.

24 25

4) When the software is ready to be installed, the following window appears. Click (Install).

8) Click (Finish) to complete software installation.

5) The following picture shows the installation process.

6) During the installation process, you might be asked to put the Windows 98SE/ME CD into

your CD-ROM drive as shown in the following picture. If you have already put your Bluetooth soft­ware CD into the CD-ROM drive, simply take it out and replace it with the Windows 98SE/ME
CD. Your PC will then automatically start to copy files from the CD.

7) This asks if you want to install hardware now or not. If you want to install hardware later, sim-

ply click [Cancel]. Always install software first and then hardware.

9) Restart your computer after installation is complete.

Connect charger to your computer

Bluetooth software installation is complete. In the final step, you need to connect the pen and
charger and configure.

1) Connect your charger to an available USB port.

2) When you connect the device into your USB port, a window should pop up, telling you “New
Hardware detected’. [Add New Hardware Wizard] will run and install the correct driver on your
system. (Although it is plug and play, you might need the CD).

Warning: If the installed hardware cannot be found, select [Start] > [Control Panel] > [New

Hardware] and detect the new hardware. Then, install the driver manually.

Bluetooth Configuration

Bluetooth configurations in a Windows 98/ME environment are the same as Windows 2000/XP.
Please refer to the Bluetooth connection configurations on page 16 (You might need the
Windows CD in a Windows 98/ME environment).

26 27

5. scrivo.1 Driver and Software

5.2 scrivo.1 driver setting

5.1 Installing scrivo.1 driver and utilities

Caution: Please exit other programs before connecting scrivo.1 or installing scrivo.1 driver
and utilities.

Setup Bluetooth communication pen and receiver before installing scrivo.1 driver. (Use Bluetooth
Dongle CD). Insert the scrivo.1 driver CD into your CD-ROM drive and install the driver after set­ting up Bluetooth communication.

1) Select your language.

Installation files will be automatically loaded when the CD included is inserted into the CD-ROM
drive. Select your language to install driver and utilities.

.

2) Choosing setup type.

Select installation details and click [Next] to continue.

After installation, an icon will be created in the System Tray as shown in the figure below .

scrivo.1 System Tray logo figure. Open the scrivo.1 Control Center by
clicking scrivo.1 Setting.

Another way to open the scrivo.1 Control Center is to press the hot key (Defalt: F12). Simple
settings can be done here. Choose “Advanced Configuration” for detailed settings.

Speed

_ Install scrivo.1 USB driver – USB driver will be installed if selected.
_ Install Utilities – Finger Note

TM

will be installed if selected.

_ Mouse Mode – This setting configures acceleration in mouse mode. Acceleration can be

adjusted by moving the slider (Default: Middle)

_ Pen Mode – This setting configures acceleration in pen mode. Acceleration can be adjusted by

moving the slider (Default: 45)

24 2528 29

Double Click

Wheel setting

This setting allows users to adjust the double clicking action using scrivo.1. Move your cursor to
the target diagram and double click. The values in the small dialog box will change. By clicking
“Apply” you can set the value according to the double click action you just made. It will be helpful

to click several times. The corresponding range
values appear. If you want to change it to the
default setting, simply click on “Default’.
(Default: Speed 600ms, Range 32x32 pixels).
If speed is set too fast or too centred in the
circle, users might experience discomfort with

scrivo.1.

Coordination

This setting allows users to choose between right-handed and left-handed use. This is convenient
for left-handed users. Select “coordinates” and then click and drag the red coloured area to draw
out the most comfortable position. This setting applies the best hand position for users. When
you want to apply the default setting, simply click (Set default).

This setting allows users to configure the wheel function. The default value is 3 lines when opera­ting the window with the mouse pointer. Users can change the number of lines, reverse scroll,
select window.

scrivo.1 info

An overview of scrivo.1 driver version information and manufacturer information is shown here.

Hot Key

For user’s convenience, a hot key feature has been added to open the scrivo.1 control center

and to switch between pen/mouse mode. The
“Finger Note

TM

” utilitiy can also be used with a
hot key. Users can open the scrivo.1 control
center or switch mode by pressing the key that
has been set for the hotkey on any screen. The
hot key’s key can be customized by users.
(Default: Open scrivo.1 control center -> F12,
Mouse/Pen Mode Change -> F4 Finger Note

TM

->F6).

30 31

5.3 Changing mode and usage

Restarting Driver

Changing mode

_ Changing mode using the hot key

Change mode using the hot key (Standard: F4). It will appear on the screen at the same time
when mode has been changed as shown in the figure below.

_ Changing mode by using System Tray

Click the scrivo.1 icon and choose between Pen or Mouse mode as shown in the figure below.
The check mark (√) indicates current mode.

Changing Mouse mode to Pen mode Changing Pen mode to Mouse mode

If scrivo.1 is connected to the PC after the PC has been started, scrivo.1 may not operate correct­ly. If so, end the scrivo.1 driver in the System Tray and restart the driver. (Refer to the figure below)

Right Mouse Button

scrivo.1´s push button, located on the front of scrivo.1, functions the same way as the right

mouse button. The keyboard can be used as the right button function for those who are having
difficulties using the push button. Place the cursor to where you want to click, click the tip once,
and then press the keyboard key which located on the bottom right hand side of your keyboard
for the right button function.

_ Changing mode by opening the scrivo.1 Control Center

Open the scrivo.1 Control Center by pressing the Hotkey (Default: F12). Choose between
Pen mode/Mouse mode and click [OK].

32 33

6. Using Finger Note

TM

b. Windows Mode button

6.1 What is Finger NoteTM? (Only for PC users)

Finger NoteTMis a tool which can be used to capture anything on your computer screen. You can
also write and draw on the captured image, and save it to file.

6.2 Finger NoteTMBasic Menu

TM

The followings are Finger Note

’s running images

This menu appears when you first run the program.

If you click on the red arrow that is on the very right side.

This button allows you to go back to the Windows mode from captured screen mode. Here, you
can work on your computer in normal setting.

c. List button

This button enables you to browse through all
previous captured screens and re-open them.

Arrow buttons can also be used to select an
image from the list.

d. Save button

This button enables you to save captured images under a different file name. (Image file)

e. Board image button

You can have more options and buttons like the image above. Once you click the red arrow button
again, you get to see only basic menu like before.

6.3 Each button’s use

a. Screen capture button

You can load a saved template board image
and work on it.

This button is to capture the whole computer
screen in order to work on the captured
image.

34 35

f. Import documents button

m. Eraser button

This button enebles you to erase writing or drawing in case you make mistakes. The left button is
for erasing only the parts you want to erase. The right button is used to clear everything.

n. Line button

This button enables you to draw a straight line. Left click your mouse and hold it down, then drag
it to the point you want to draw a line.

This button imports other documents
(*ppt,*doc,*xls, etc…) into the slide list.

g. Pen button

This button enables you to write or draw lines after you capture a screen. Your cursor changes
into a regular pencil shape.

h. Highlight Pen button

This button has a highlight feature and is different from the pencil button. It can be used to high­light something in a particular spot.

i. Pen diameter button

This button enables you to decide pencil/highlighter line thickness when you draw.

j. Pen colour button

This is the colour preference button. You can choose your favourite colour and change your pen
colour accordingly. (In System Properties, you can use all colours supported by Windows).

o. Circle button

Left click your mouse and hold it down, then drag it until you make the circle the size you want.

p. Rectangle button

Left click your mouse and hold it down, the drag it until you make the right size of rectangle.

q. Arrow button

Click this button and hold the mouse left button, then drag it to the point where you want to draw
the arrow.

r. Wave line button

This button is to underline or highlight your notes. Drag it as much as you want to draw wave
line.

s. property setting button

k. Help button

This Button opens a program guide “Using Finger Note

TM

”

You can change the pen default colour, pen
diameter, or 3 basic colours to your favourite
choice. You can also adjust the eraser tool
and colour size. If you click ‘Load Default’,
everything changes to the original setting.

l. Mouse right click menu button

This button works like the right mouse click button such as opening Webster board menu. Once
you click this and click mouse, it works like clicking the right button of your mouse for 5 secs.
After 5 secs, it goes back to normal setting.

36 37

7. Troubleshooting

Although scrivo.1 is designed to be highly reliable, you may occasionally experience a problem.
The following will help you to identify the cause of possible problems and suggest solutions for
related problems

8. Contact & Support

The plawa technical support team is eager to help you enjoy your new plawa product. If you are
experiencing difficulties, please contact us at the following address:

Symptom

PC does not recognize

scrivo.1.

Cursor does not move.

Cursor moves, but the clicking
function is not working.

Cursor is too sensitive.

Cause

Is your pen cradle’s USB cable
connected to the USB port?

Is there a problem with your
USB port?

Does the Bluetooth icon in the
system tray not turn from red
to white?

Is the Bluetooth icon in the
system tray green?

Press pen tip (first button).
Does it function like a right
button?

Do you see a dark red light in
front of the pen?

Is pen tip damaged?

Have you installed scrivo.1
driver?

Solution

Connect scrivo.1 cradle’s USB
cable to the USB port.

Try a different USB port.

Reinstall Bluetooth software
(refer to page 11).

If not, setup communication
process between scrivo.1
and the receiver again (Refer
to page 16).

If not, setup scrivo.1 pen
again (refer to page 24).

If not, setup scrivo.1 again.

Replace the pen tip
(Refer to page 9).

Install the driver again (Refer
to page 24).

plawa-feinwerktechnik GmbH & Co. KG
Bleichereistr. 18
73066 Uhingen, Germany

Telephone: [phone]
Fax: [phone]
Website: http://www.plawa.com
Online-service: [e-mail]

Do you have any comments or suggestions? If so, we would love to hear from you! Please visit
our website and fill out the contact form or you can send us a mail to the address above. Your
comments and suggestions help make our products better and enhanced to fit your needs.

Thank you for purchasing this plawa-product.

Cursor does not move the way
I want it.

38 39

Are you using the pad provided
with scrivo.1 package?
(It may malfunction if used in a
different environment.)

Use scrivo.1 on the pad provi­ded with the scrivo.1 package
for the best results.