Platinum Tools TP150 Specsheet
Tone and Probe Set
Designed specifically
for easy cable tracing
and identification.
Make cable tracing easy with Platinum
Tools’ Tone and Probe Set. With its steady tone,
push-to-scan button and a clear loudspeaker,
quickly trace and identify cable locations on
jacks or through walls. Wire bundles are easily
penetrated with the tapered probe tip and the
probe volume is controlled with a thumbwheel.
With common send and receive frequencies,
the TP150 is versatile enough to be used with
other tone generators or probes.
Probe Features
•
Recessed push-button activates tone scanning
when needed
•
Tapered tip allows easy penetration of cable
bundles
•
Sidethumbwheeladjustsvolumeandturnso
power to reserve battery power
•
Probe Sensitivity: 100Hz~300KHz
Tone Generator Features
•
Slide switch to select TONE/OFF/CONT
•
Continuity mode to verify if a wire is broken
•
Alligator clips to test pairs and an RJ11
connector for data or phone lines
•
Tone Generator Output: 1.5KHz square waveform
Scan for more
information
Technical Data
Tone Generator
Length: 5.7"x1.7"x1.1" (145mm x 43mm x 28mm)
Weight: 4.3oz (122.8g)
Probe
Length: 9.0"x1.8"x1.0" (229mm x 46mm x 25mm)
Weight: 3.8oz (106.2g)
Ordering Information
Description P/N UPC CODE
Tone & Probe Set TP150* 849160007142
*Includes carrying case, 9V batteries & user instructions
Phone: 800.749.5783
Fax: 800.749.5784
California, USA
www.platinumtools.com
We Make Connections EZ!
©2014 Platinum Tools, Inc. All rights reserved. PF-TP150-TS REV A 1014
Loading...