link), cable verification, cable troubleshooting and PoE voltage testing
in a handheld tester with a full-color display; all with the capability of
saving and printing tests results from a personal computer.
combines network testing (physical layer and
• Displays IP Address
• Troubleshoot Network Issues
• Verify Port Settings
• Test VDV Cables
Network Testing
•Ping both IPV4 and IPV6 addresses
•Test TCP/UDP throughput
•Detects and reports advertised link speed and link duplex capability
•Tests the presence of VLANs
•CDP/LLDP/NDP and VLAN identification provides network
configuration information
•Ping specific URL to verify WAN connectivity
•Blinks link light to identify location on a hub/switch/router port
•Display network devices & associated IP Addresses
Cable Verification & Troubleshooting
The Net Prowler™ provides full cable testing on any category network, coax, or telephone cable. It will display wire map, numbered
ID remotes, and any faults, including shorts, opens, miswires, split
™
pairs, and reverses. The full-featured Net Prowler
length (using TDR technology) and generates tone levels for signal
tracing and cable identification on all pairs, a selected pair or a
selected pin.
measures cable
Tests 10/100/1000
Base-T, IPV4/IPV6, VLAN,
DHCP and more
We Make Connections EZ!
PoE Voltage Testing
The Net Prowler™ enables quick identification of a network drops
™
link capability and current link status. Net Prowler
presence of PoE on the network drop and what class of PoE per
IEEE 802.3 af/at with load test for voltage drop. These network
tests can also be saved for record keeping and printing.
ports/jacks at once Numbered custom RJ45
remotes 1 thru 12 for easy identification
Verify Port Settings •
Test VDV Cables •
ID and Test Coax
Remote Set
•ID/MAP 8 video (coax) cables at once.
Numbered custom F remotes 1 thru 8 for
easy identification
Cables
•Micro USB Cable: Connects Net Prowler to
computer for exporting test results
•No-Fault Cable: 7.5” Special RJ12 to RJ12
The No-Fault Cable uses no-fault RJ12 connectors on both ends to assure no damage
to the RJ45 jacks. It is the ideal patch cable
to use when mapping or shooting tone
•RJ45 Port Saver: Extend the life of your
tester by using the RJ45 Port Saver as your
sacrificial cable. This eliminates the wear and
tear from constantly plugging in and out of
the tester port
•Tone Cable RJ45/Alligator: Use when
shooting tone via the data port. Cable
conductors are terminated on contact #1 and
#2, so program your Cable Prowler to shoot
tone on pair 1 and 2
The Net Prowler comes with a handy hanging pouch for easy portability and
organization. Included are the following accessories to help you get started:
Kit Includes
•Net Prowler
™
Main Unit
•#1-5 Coax ID and Test Remote Set
•#1-5 Data ID-only Remote Set
•F Female to F Female Adapter F81
•Network/Tel Test and ID Smart Remote #1
•No-Fault Cables – Qty 2
•Micro USB Cable
•Hanging Pouch
•Quick Start Guide
•User Manual (Online)
•Warranty Activation Card
•6x Alkaline AA batteries
Specifications
Net Prowler
PRO Test Kit
TNP850K1
Kit Includes
•Net Prowler
•#1-8 Network/Tel Test and ID Smart Remotes
•#1-8 ID and Test Coax Remote Set
•#1-12 ID-only Data Remote Set
•Micro USB Cable
•No-Fault Cable – (Qty 2)
•RJ45 Port Saver
•RJ45 Alligator 12 Inch
•F Female to F Female Adapter F81 – (Qty 2)
•BNC Female-to-F Female Adapter
•BNC Female-to-F Male Adapter
•Heavy Duty Case
•Quick Start Guide
•Warranty Activation Card
™
Main Unit
Measurement Technology
Cable Measurements
Power over Ethernet
Active Ethernet
Maximum Voltage
Save Test Results
Tone Generation
Languages
Battery Life
Altitude
Temperature
Humidity
Enclosure
Size
Weight
Safety Compliances
Warranty
Phone: 805.384.2777/800.749.5783
Time Domain Reflectometry (TDR)
Cable Testing and ID: up to 1000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1 ft)
Supports 8 continuity and ID number remotes (RJ45)
Supports 20 RJ45 and 20 F connector ID only remotes
Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
Tests for classes and loads cable up to 25.5 watts
(at class 4) Identifies Mode A or B (pairs with PoE)
Indicates advertised speeds of 10/100/1000base-T half
or full duplex. Can link to network at 10/100base-T
RJ Jack: 66 VDC or 55 VAC
F Connector: 50 VDC or VAC
Refers to the max voltage that can be applied to any 2 connector
pins without damaging the tester
Stores up to 250 cable or network tests with user defined names
Tone Frequencies: 730 Hz and 1440 Hz
EN, FR, ESP, DEU, ITA
For 6 x AA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
Operating – 20 hours typically
Standby – 1.5 years typically
(200uA max standby current) Batteries are included
10,000 ft (3048 m) operating
Operating: 32 to 122°F (0 to 50°C)
Storage: -22 to +140°F (-30 to 60°C)
10 to 90% non-condensing
High-strength PC/ABS plastic with V0 rating with boot
Withstands 4 foot drops onto concrete
1.85”H x 3.6”W x 6.8”L (4.7 x 9.15 x 17.3 cm)
With batteries: 1 lb 2 oz (510 g)
CE
1 Year
California, USA
• Fax: 800.749.5784
www.platinumtools.com
We Make Connections EZ!
2015 Platinum Tools, All rights reserved
PF-TNP700 NC Rev C 0516
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.