Platinum Tools JH707 Specsheet

TM

Xtender Pole

• Work from the oor

• Speed Installation

• Improve Safety

• Save money

Xtender Pole

The professional contractor’s and low-voltage cable
installer’s tool for easier overhead installations. Working from
the oor provides a safer way to reach areas that previously
were dangerous or inaccessible by ladders, scaffolding, and

scissor lifts.... including vaulted ceilings, over stairwells, and

through ceiling grid. This multi-purpose telescoping pole
has interchangeable heads for installing J-Hooks, eye lag
screws, ceiling wire, jack chain and threaded rod from the
work oor.

Features

• Install hanging hardware from work oor, improves
safety and efciency

• All-In-One adapter system for threaded rod, eye lag
screws, wire & jack chain

• Install multiple fastener types to a variety of ceiling
structures – Elco®, Hanger Mate®, Buildex Sammy
Super Screws®, Powers Vertigo

• Powered with any 3/8" or 1/2" drill

• Includes female hex adapter for 1/4" male driver
and 5/8" hex adapter

• Video instructions for applications (Platinum website)

• Tips & Instruction Booklet

• Xtender Pole-12 (three 4' sections, ceilings up to 18')

• Xtender Pole-18 (three 6' sections ceilings up to 24')

TM

™

We Make Connections EZ!

™

Applications

• Hang ceiling wire (12 or 9 gauge)

Install up to 100 ceiling wires per hour.

• Hang Threaded Rod

3/8" or 1/4" rod up to 10 feet long.

• Overhead Screw Installation

Transforms into a very long screwdriver.

• Hang Jack Chain

Easily from the work oor.

• Hang Wire & Clip Assemblies

Eye lag screws, hangers, multi-purpose
clips.

Technical Data

• Material: Aircraft quality aluminum

• Finish: Black anodized

See reverse for

additional information.

California, USA

Phone: [phone] • Fax: [phone]

www.platinumtools.com

Saves money. Speeds installation. Improves safety.

Adapter
Base

Versatility comes from the unique adapter

heads that are specic to each application.

Adapters:

Included:

Female Hex Adapter for
1/4" Male Driver - JH701

Use with any 1/4" hex bit.

(Shown with Phillips bit to
create a very long screwdriver.)

Female Open End 5/8"
Hex Adapter - JH703

For installing ITW
Buildex Sammy Super
Screws® & will work
with Powers Vertigo™.
For use with 1/4-20 &
3/8-16 threaded rod
installation.

Drill Adapter - JH707

Power the pole with
any 3/8" or 1/2" drill

Xtender Pole & Accessories

Part No. Description UPC

JH712 Xtender Pole-12 – (Box) 849160004202

JH718 Xtender Pole-18 – (Box) 849160004219

JH711 Keyless Chuck Adapter, 3/8” 849160010180

JH701 Female Hex Adapter – 1/4” Male Driver 849160004226

JH702 Open End 3/8” Adapter 849160004233

JH703 Female Open End 5/8” Hex Adapter 849160004240

JH705 1/2” NPT Adapter 849160004264

JH707 Drill Adapter 849160004288

JH975 Installation Tool – Vertical Overhang – (Box) 849160002987

We Make Connections EZ!

™

Wire & chain
adapter included.

Additional adapters:

Open End 3/8"
Adapter - JH702

Use to install
threaded rod.

1/2" NPT Adapter - JH705

Use with installation
tool, P/N JH975
or any other tool
requiring 1/2"
NPT (National Pipe
Thread.)

Keyless Chuck Adapter,
3/8” - JH711

Phone: [phone] • Fax: [phone]

1/2" Hex - Use with

Elco® HangerMate screws
to install 1/4-20 or
3/8-16 threaded rod.

Installation
Tool - JH975

For vertical
(JH901-100)
& angled
(JH902-100)
overhang.

California, USA

www.platinumtools.com

2017© Platinum Tools, Inc. All rights reserved. Xtender Pole 12/17 JB