Platinum Tools JH703 Specsheet
TM
A
M
A
D
E
I
N
T
H
E
M
A
D
E
I
N
T
H
E
U
S
A
Xtender Pole
• Work from the floor
• Speed Installation
• Improve Safety
• Save money
The professional contractors and low-voltage
cable installers tool for easier overhead installa-
tions. Working from the oor provides a safer way
to reach areas that previously were dangerous or
inaccessible by ladders, scaffolding, and scissor
lifts.... including vaulted ceilings, over stairwells,
and through ceiling grid. This multi-purpose
telescoping pole has interchangeable heads for
installing J-Hooks, eye lag screws, ceiling wire,
jack chain and threaded rod from the work floor.
Features
• Install hanging hardware from work oor,
improves safety and efciency
• All-In-One adapter system for threaded rod,
eye lag screws, wire & jack chain
• Install multiple fastener types to a variety of
ceiling structures — Elco
Buildex Sammy Super Screws
• Powered with any 3/8" or 1/2" drill
• Includes female hex adapter for 1/4" male driver
and 5/8" hex adapter
• Video instructions for applications (Platinum website)
• Tips & Instruction Booklet
• Xtender Pole-12 (three 4' sections, ceilings up to 18')
• Xtender Pole-18 (three 6' sections ceilings up to 24')
®
, Hanger Mate®,
®
, Powers Vertigo
TM
Applications
• Hang ceiling wire (12 or 9 gauge)
Install up to 100 ceiling wires per hour.
• Hang Threaded Rod
3/8" or 1/4" rod up to 10 feet long.
• Overhead Screw Installation
Transforms into a very long screwdriver.
• Hang Jack Chain
Easily from the work oor.
• Hang Wire & Clip Assemblies
Eye lag screws, hangers, multi-
purpose clips.
Technical Data
• Material: Aircraft quality aluminum
• Finish: Black anodized
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
We Make Connections EZ!
See reverse for
additional information.
We Make Connections EZ!
Saves money. Speeds installation. Improves safety.
Adapter
Base
Versatility comes from the unique adapter
heads that are specic to each application.
Adapters:
Included:
Female Hex Adapter for
1/4" Male Driver
Use with any 1/4" hex bit.
(Shown with Phillips bit to
create a very long screwdriver.)
Female Open End 5/8"
Hex Adapter
For installing ITW
Buildex Sammy Super
Screws
with Powers Vertigo
For use with 1/4-20 &
3/8-16 threaded rod
installation.
®
& will work
Drill Adapter - JH707
Power the pole with
any 3/8" or 1/2" drill
- JH701
- JH703
™
.
Wire & chain
adapter included.
Additional adapters:
Open End 3/8"
Adapter
Use to install
threaded rod.
- JH702
1/2" NPT Adapter - JH705
Use with installation
tool, PN JH975
or any other tool
requiring 1/2" NPT
(National Pipe
Thread.)
1/2" Hex - Use with Elco
HangerMate screws
to install 1/4-20 or
3/8-16 threaded rod.
Installation
- JH975
Tool
For vertical
(JH901-100)
& angled
(JH902-100)
overhang.
®
Xtender Pole & Accessories
Part No. Description UPC
JH712 Xtender Pole -12 - (Box) 899740005204
JH718 Xtender Pole -18 - (Box) 899740005211
JH701 Female Hex Adapter - 1/4" Male Driver 899740005228
JH702 Open End 3/8” Adapter 899740005235
JH703 Female Open End 5/8” Hex Adapter 899740005242
JH705 1/2" NPT Adapter 899740005266
JH707 Drill Adapter 899740005280
JH975 Installation Tool - Vertical Overhang - (Box) 899740003989
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
©2011 Platinum Tools, Inc. All rights reserved. Xtender Pole Product Flyer 11/11
Loading...