Platinum Tools 15041 Instructions

P/N 15041 BR1 MULTI–STRIPPER INSTRUCTIONS

Stripping Coax:

1

1. Make sure the correct cable size (RG59/6 or RG7/11) is
displayed on the front or side of the cassette. The
cassette is reversible and easy to change. Pull it out,
rotate and re-insert with the correct cable size showing.

Note: To remove cassette, use both sides of the cassette
and pull out and away from the front end. (See red arrows in
Fig 1)

Stripping Twisted

2

2. For best
performance,
rotate stripper
in same
direction as
the arrow
molded on
side of tool
(see red
arrow)

Pair (UTP & STP)

3. Use the second

stripping hole. Stripping
depth is adjustable to
accommodate a range
of cables. (See red
arrows in Fig 3)

NOTE: For best
results, score your
cable jacket!

IS15041

3

4

Built-in Cutters

5

for Cutting:

Fig 4: For cutting multiple or

single conductor wires (See
red arrow)
Fig 5: For cutting round
cables (See red arrow)

Separating & Straightening Twisted Pairs

6

Do NOT use on live circuits!

Cutting blades are extremely sharp. Handle with care.

www.platinumtools.com ©Platinum Tools, Inc.

All rights reserved. BR1 Multi –Stripper Tool IS 15041 12/11

7 8

6. Grip the ends of a pair
using the serrated teeth
inside the front end of the
tool (see red arrow in Fig

6)

7. De-twist UTP/STP
cable

8. Use channels on top of
tool for straightening wires
the de-twisted wires