Platinum Tools 12515 Specsheet

Instructions

10Gig Termination System

1 Strip & remove 1" of your

cable jacket with the
Cyclops
(P/N 15010C). Remove
cellophane and shield.
Straighten the wires.

Use the chart above to
determine whether
you will be using
the T568A or T568B

conguration and

organize wires accordingly.

®

2 Cable Stripper

T568A / T568B
Wiring Chart

2 Line up your wires

and make a clean
cut across all
8 conductors and
slide on the wire
guide bar.

(A) Slide bar down until snug with the end of the jacket.

(B) Cut across all 8 conductors leaving 3/16" of wire

protruding from wire guide bar.

A

B

3 Reshape the

end of the cable
using the CT-360
(PN 12360),
making it oval
so it slides into
the connector
with ease.

Your wire is ready to be inserted.

4 Carefully insert into backend of connector (A) and push

all the way forward (B) until all 8 conductors are seated

ush against the front end.

NOTE: DO NOT use a standard RJ45 crimp tool. This connector
is designed with NO primary strain relief. Using a
standard RJ45 crimp tool will crush the connector.

Wire 1 2 3 4 5 6 7 8
T568A W/G G W/O B W/B O W/B B
T568B W/O O W/G B W/B G W/B B

6 Roll up the drain wire and

place in the base of the
external ground. As you start
to bring the external ground
into place onto the cable, keep
the mass of drain wire tucked
in so it is totally covered.

7

Bend down the external ground
onto the cable jacket and push
in the wing tips.

8

Crimp the external
ground using the
CT-360.

Use the large or
small tool cavity
depending on the
size of your cable.

NOTE: DO NOT
over crimp the
external ground.

Large Cavity

Small Cavity

For terminating
Cat6E, Cat6A, Cat7
and larger industrial
Ethernet cables.

Tele-TitanXg Crimp Tool
P/N 90170

Tele-TitanXg Crimp Tool
P/N 12515C

Streaming media demands robust,

dependable networks, including 10-Gig
Cat6A shielded cable, to provide the
necessary expanded bandwidth. However,
these larger, shielded cables require special
connectors and tools.

Our 10-Gig shielded connector and
Tele-TitanXg crimp tool are specically de­signed to terminate Cat6A cables. A pairing
that assures you will achieve 10-Gig perfor­mance... a true 10Gig Termination System.

A B

5

Insert the
prepped
connector into
the proper cavity
of the Tele-TitanXg
(P/N 12515C) crimper,
Squeeze handle to
terminate.

9 You are nished

Phone: [phone] Fax: [phone]

806 Calle Plano

Camarillo, CA 93012

www.platinumtools.com

We Make Connections EZ!

©2013 Platinum Tools, Inc. All rights reserved. 10Gig Termination System PF 6/13

RJ45
Cat6A/10-Gig
shielded connector

10-Gig Shielded Connector
P/N 106190

P/N 106190

RJ45 Cat6A/10-Gig shielded connector:

• Max cable OD: 8.5mm/0.335"

• Max conductor OD: 1.35mm/0.053"

• Meets 10-Gig performance standard

• UL and RoHS compliant

Tele-TitanXg Crimp Tool:

• Specically made for terminating, P/N 106190

• Straight action vertical crimp force

• Minimal hand force for a perfect crimp

Application:

• Cat6E • 10-Gig Cat6A

• Cat7

See Kit

Inside

Ï

Kit Includes (P/N 90170):

P/N 90170

10Gig Termination Kit...

meets 10-Gig performance standard.

Tele-TitanXg Crimp Tool P/N 12515C

• Specically designed for RJ45 Cat6A/10-Gig

shielded connectors (Not for standard RJ45 modular plugs)

• Minimal hand force

• Straight action crimp

• Compact & rugged

• Terminates to industry specied crimp heights

• Stays securely closed with gun-style lock

• Built-in cable stripper for round wire and at satin

• Easily control the blade

depth when stripping

• Built-in cable cutter

Applications:

• Cat6E, Cat6A, Cat7 &

over-sized Cat5e/6

industrial Ethernet cables

CT-360 External Ground Crimp Tool P/N 12360C

• 360˚ crimp on the external ground tab of shielded RJ45 connectors

• Perform concentric termination with full control to prevent

over or under crimping

• Dual cavity covers wide range of cable ODs ranging from

0.245" to 0.335" (6.2mm - 8.5mm)

• Spring-loaded, non-ratcheted design

• Steel frame, black oxide nish, molded handles

RJ12/11

10-Gig RJ45

• Tele-TitanXg Cat6A/10-Gig
Crimp Tool

• CT-360 External Ground
Crimp Tool

Description P/N UPC CODE

10Gig Termination Kit 90170 849160006435

Tele-TitanXg 10-Gig Crimp Tool 12515C 849160005223
Cyclops 2 Cable Jacket Stripper 15010C 899740000254

CT-360 External Ground Crimp Tool 12360C 849160005148

RJ45 Cat6A/10-Gig

Kit Includes

Shielded Connectors w/Liners, 100 pcs 106190 849160005155

Additional Connector & Liner P/Ns

RJ45 Cat6A/10-Gig
Shielded Connectors w/Liners, 50 pcs 106192C 849160005179

Spare Liners, 50 pcs 106194 849160006442

• Cyclops® 2 Cable
Jacket Stripper

• RJ45 Cat6A/10-Gig Shielded Connectors
100 each, connectors & liners

RJ45 Cat6A/10-Gig
Shielded Connectors

• Exceeds 10-Gig performance standard

• UL and RoHS compliant

• Max cable OD: 0.335”/8.5mm

• Max conductor OD: 0.053”/1.35mm

Connector Liner

P/N 106190

Cyclops® 2 Cable
Jacket Stripper

• Self-adjusts to automatically

score PVC and Plenum

• Ready-to-use out of the kit

• Works with shielded/unshielded

twisted pair and ber optic cables

• Accepts cable ODs

0.10" to 0.43" (2.5mm - 11mm)

P/N 15010C

www.platinumtools.com We Make Connections EZ!