Platemate WM12 User Manual

Our smallest

Plate Mate can be

your biggest help!

www.plate-mate.com

WALL MODELS - WM 6 - CODE 370

WM 9 - CODE 360

WM 12 - CODE 350

• HOLDING CAPACITY:WM 6 6 plates
WM 9 9 plates

WM 12 12 plates

• HEIGHT: WM 6 57 cm
WM 9 77 cm

WM 12 99 cm

• WIDTH: WM 6, WM 9, WM 12 7 cm

• NET WEIGHT: WM 6 1 kg
WM 9 1.5kg

WM 12 1.9kg

• GROSS WEIGHT: WM 6 1.2kg
WM 9 1.8kg

WM 12 2.2kg

•BOX: WM 6 13 X 13 X 62 cm
WM 9 13 X 13 X 82 cm
WM 12 13 X 13 X 103

cm

1 KG= 2.2 LBS

1 Inch=2.54 cm

PLATE MATE wall models have been designed for small
kitchens used for professional as well as private purposes..

The models are supplied in three different sizes with capacities of
6, 9 and 12 plates. Hardware for attaching the units is enclosed.
You can attach the models permanently to the wall itself, or you can
attach them to a stand-alone holder which can then be hung on
the wall. This allows you to use this unit both as a table and as a
wall model. The unit can be cleaned in the dishwasher or with a
soap solution and a brush.

The Product Group, Inc. 1-800-860-6283
Canton, Ohio www.plate-mate.com

WALL MODELS - WM 6 - CODE 370

WM 9 - CODE 360

WM 12 - CODE 350

© Copyright 1996 The Product Group, Patented by H.T.H.b.v. Netherlands

ASSEMBLY

Take the wall model out of the box. Draw the holes in the head and the
foot onto the corresponding places on the wall where you plan to attach
the unit.
Drill the holes, insert the plugs and screw the wall model onto the wall.
As an alternative, the wall model can be screwed onto a wooden or
plastic board and the whole unit hung from the wall. The advantage of
this method is ease of cleaning and the fact that it can be attached and
used in several places.

Part Name Part No. Quantity

Head WM1 1
Column 6/9/12 WM2 1
Red shuttle WM3 DIV.
Shuttle pin WM4 DIV.
Bracket set WM5 DIV.
Foot WM6 1
Adjusting screw - M6 X 60 WM7 1
Set of fasteners WM8 1

PARTS LIST FOR WALL MOUNTS