Plasti-Bond, a RobRoy Company Pulling Elbows Catalog Page
Pulling Elbows
Pulling Elbows
Description:
Plasti-Bond REDH2OT LBD conduit bodies are used at 90˚ bends in conduit runs to allow straight pulls at
bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings, or to
allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across
assembled joints.
General Service Fittings
Features:
■ 40 mil gray PVC exterior coating
■ 2 mil r
ed urethane interior coating
■ 10 trade sizes from 1/2" through 4"
■ Sealing sleeves on all conduit openings
■ Molded-in seal between body and cover
■ Domed covers allow gentle bends of conductors
■ Shipped with covers
■ Angled covers allow straight pulling in either
direction
Pulling Elbows Technical Data
Standards:
Steel Fittings Only
■ UL 514B (E200413)
PULLING ELBOWS LBD
PIPE FERROUS NOMINAL ALUMINUM
SIZE CATALOG # WEIGHT A B C D E CATALOG #
1/2" PRLBD1100 1.2 5.00 2.35 1.39 1.00 3.34 PRLBD1100SA
3/4" PRLBD2200 2.0 6.25 2.67 1.64 1.25 4.53 PRLBD2200SA
1" PRLBD3300 2.5 6.25 2.98 1.89 1.50 4.34 PRLBD3300SA
1-1/4" PRLBD4400 6.0 8.63 4.29 3.58 1.81 7.19 PRLBD4400SA
1-1/2" PRLBD5500 11.5 12.44 5.48 4.71 2.63 10.88 PRLBD5500SA
2" PRLBD6600 18.0 12.44 5.48 4.71 2.63 10.88 PRLBD6600SA
2-1/2" PRLBD7700 22.0 19.
3" PRLBD8800 35.0 19.69 9.60 5.71 3.00 15.75 PRLBD8800SA
3-1/2" PRLBD9900 60.0 20.88 10.92 7.83 4.75 19.89 –
3-1/2" – 60.0 27.81 11.92 7.21 4.00 24.00 PRLBD9900SA
4" PRLBD10900 70.0 20.88 10.92 7.83 4.75 19.89 –
4" – 70.0 27.81 11.92 7.21 4.00 24.00 PRLBD10900SA
9.60 5.71 3.00 15.75 PRLBD7700SA
69
Contact us:
customerservice@plastibond.com
Visit www.plastibond.com
For more information
33
Loading...