Plasti-Bond, a RobRoy Company Installation Tools Catalog Page

Installation Tools

Spin-It Plasti-Socket z-Wrench

With the Plasti-Bond Spin-It, Plasti-Bond
REDH2OT can be tightened much faster than
with conventional tools. Because the Spin-It
never touches the coating, damage to the
conduit is eliminated.

CATALOG # DESCRIPTION

SPSPIN-IT-3/4 3/4" Spin-It
SPSPIN-IT-1 1" Spin-It
SPSPIN-IT-1-1/4 1-1/4" Spin-It
SPSPIN-IT-1-1/2 1-1/2" Spin-It
SPSPIN-IT-2 2" Spin-It

Plasti-Socket is a ber-glass encapsulated 3/8"
drive socket for use with the square berglass
encapsulated U bolt and beam clamp nuts used
in the Plasti-Bond RED-H
system. The Plasti-Socket helps avoid coating
damage from metal sockets, pliers or wrenches.

CATALOG # DESCRIPTION

PSPLASTISOCKET-3/8 3/8" Plasti-Socket

OT conduit support

2

Z-Wrench features extra wide jaws which spread
the clamping force, enabling the tool to grip without
marring the surface of the conduit. The “V” shaped
upper jaw allows Z-Wrench
wide range of conduit sizes. Shallow grooves in the
upper and lower jaws provide an excellent grip.

CATALOG # DESCRIPTION

SPJPZ1 1/2" – 1-1/4" Z-Wrench
SPJPZ2 1-1/2" – 2-1/2" Z-Wrench

JAWS 3 Half Shell Clamps Hickey

JAWS 3 are a set of aluminum-nickel-bronze vise
jaws designed to replace the regular jaws in a
RIGID #23 or #40-A pipe vise. They completely
protect the exterior coating from damage caused
by the vise jaws when cutting or threading.

Half Shell Clamps are designed to cover a large
surface area when clamping conduit, especially
in a chain vise. This allows for a strong grip
without damaging the exterior coating.

The Plasti-Bond Hickey is a special
bending tool with a 40 mil PVC coating which
reduces the possibility of damage during
conduit bending.

to accommodate a

Installation Tools

58

CATALOG # DESCRIPTION

JWJAWS3-#23 JAWS3 #23 Pipe Vise
JWJAWS3-#40-A JAWS3 #40-A Tripod Pipe Vise

CATALOG # DESCRIPTION

JWHLF-SHL-CLP2 2" Half-Shell Conduit Clamp
JWHLF-SHL-CLP2-1/2 2-1/2" Half-Shell Conduit Clamp
JWHLF-SHL-CLP3 3" Half-Shell Conduit Clamp
JWHLF-SHL-CLP3-1/2 3-1/2" Half-Shell Conduit Clamp
JWHLF-SHL-CLP4 4" Half-Shell Conduit Clamp
JWHLF-SHL-CLP5 5" Half-Shell Conduit Clamp
JWHLF-SHL-CLP6 6" Half-Shell Conduit Clamp

CATALOG # DESCRIPTION

PBHICKEY 1/2" & 3/4" Conduit Bender

Touch Up Compounds

Plasti-Bond REDH2OT Touchup Compounds are available to repair minor damage to the interior urethane or exterior PVC factory coatings.
The exterior PVC touchup compound is gray and available in a 12 oz. aerosol can, and a pint can with brush-top applicator.

The approved thread compound touchup compound is available in a pint can with a brush-top applicator.
See the installation section of the buyers’ guide for more information on using the Plasti-Bond touchup compounds.

PLASTI-BOND TOUCH UP COMPOUNDS

CATALOG # DESCRIPTION SIZE

PBTOUCHUP-SPRAY Exterior Spray Type (Gray) 12 oz.
PBTOUCHUP-GRAY-PT Exterior Non-Spray with Brush-Top (Gray) 1 pt.
PBTHREAD-COMPOUND Approved Conductive Compound-Brush-Top Pint 1 pt.

1100 US Highway 271 South
Gilmer, Texas 75644

Phone: [phone]

Fax: [phone]