Plasma Air PlasmaPURE AutoClean 1500 Installation, Operation & Maintenance Manual

INSTALLATION, OPERATION

& MAINTENANCE MANUAL

PlasmaPURE

AutoClean 1500

10/2019

www.plasma-air.com

SELF-CLEANING & NO MAINTENANCE

The PlasmaPURE AutoClean 1500 is a self-cleaning needlepoint ionizer that
produces positive and negative ions that neutralize harmful pollutants and
odors in the home. This compact self-cleaning unit automatically removes
dust and dirt build-up on the needles eliminating the need for maintenance.
It can be easily mounted at the fan inlet of almost any air handling system
including residential air conditioners, furnaces, mini-splits, fan coil units and
VRF systems. The AutoClean 1500 is self-contained in a plastic enclosure
which has molded tabs with mounting holes. Unit accepts 12V DC or
24V AC without the use of an external power supply device.

MECHANICAL INSTALLATION INSTRUCTIONS

GENERAL MOUNTING CRITERIA:

1. Do not connect to power before mechanical installation is complete.

2. Mount ionization unit to allow for future access.

3. Mount the unit at or near the fan inlet using the slots in the mounting

tabs, insuring that the air flows over the two recessed needlepoint
electrodes simultaneously. Short sheet metal screws should be used to
mount the ionizer to the fan casing. See Figures 1 & 2.

4. The unit should be mounted downstream of the filter.

5. For best results avoid locations directly downstream of a cooling coil or

humidifier.

AIR FLOW

FIGURE 1

FIGURE 2

FAN INLET

MOUNTING TA B S

CONNECT

TO POWER

12V DC or

24V AC

RECESSED NEEDLEPOINT ELECTRODES

RECESSED NEEDLEPOINT
ELECTRODES

FAN
DISCHARGE

CONNECT TO GROUND
WHERE NECESSARY