Plasma Air 1500 Installation Manual

INSTALLATION, OPERATION

& MAINTENANCE MANUAL

PlasmaPURE

AutoClean 1500

04/2020

www.plasma-air.com/residential

SELF-CLEANING & NO MAINTENANCE

The PlasmaPURE AutoClean 1500 is a self-cleaning, maintenance-free
needlepoint ionizer that produces positive and negative ions that neutralize
harmful pollutants and odors in the home. This compact self-cleaning unit
automatically removes dust and dirt build-up on the needles eliminating the
need for maintenance. It can be easily mounted at the fan inlet of almost any
air handling system including residential air conditioners, furnaces, mini-splits,
fan coil units and VRF systems. The AutoClean 1500 is self-contained in a
plastic enclosure which has molded tabs with mounting slots. Unit accepts
12V DC or 24V AC without the use of an external power supply.

MECHANICAL INSTALLATION INSTRUCTIONS

GENERAL MOUNTING CRITERIA:

1. Do not connect to power before mechanical installation is complete.

2. Mount ionization unit to allow for future access.

3. Mount the unit at or near the fan inlet using the slots in the mounting tabs,

insuring that air flows over the two recessed needlepoint electrodes
simultaneously. Short sheet metal screws should be used to mount the
ionizer to the fan casing. See Figures 1 & 2.

4. The unit should be mounted downstream of the filter.

5. For best results avoid locations directly downstream of a cooling coil or

humidifier.

AIR FLOW

FIGURE 1

FIGURE 2

FAN INLET

MOUNTING TA B S

CONNECT

TO POWER

12V DC or

24V AC

RECESSED NEEDLEPOINT ELECTRODES

RECESSED NEEDLEPOINT
ELECTRODES

FAN
DISCHARGE

CONNECT TO GROUND
WHERE NECESSARY