Product regulatory information .............................................................. 24
ii
Palm® ultralight wireless headset
SECOND Draft Palm, Inc. Confidential
Palm® ultralight wireless headset
Thank you for purchasing the Palm® ultralight wireless headset. We hope you will
be delighted with its operation.
Please read this guide to get started and make the best use of your headset’s
many features.
[!]
IMPORTANT
the driver, and this may increase the likelihood of an accident. When using the
phone while driving, keep conversations short and do not make notes or read
documents. Before answering calls, consider your circumstances. Pull off the
road and park before making or answering calls when driving conditions require
it—for example, bad weather, high traffic density, presence of children in the car,
or difficult junctions or maneuvers. Always follow local laws.
What you’ll learn to do in this guide:
• Charge your headset and turn it on
• Check compatibility and pair (form a partnership) with your Bluetooth
• Switch between wearing the headset on your left or right ear
• Make, answer, and end a call
•Use mute
• Use advanced features
Using a mobile phone while driving creates a distraction to
®
phone
[*]
NOTE
Read the Glossary
important terms.
Palm®Ultralight Wireless Headset1
at the end of this guide to familiarize yourself with
Package contents
SECOND Draft Palm, Inc. Confidential
Package contents
Storage
case
Headset with a
built-in rechargeable
battery
Indicator light
Call control button
Volume/DSP/mute
button
Microphone
Battery
Headset carrying
pocket
Battery
holder
Charger
adapter*
*Use only the charger provided with your Palm® TreoTM smartphone and the
charging adapter provided.
** Replace the battery with only a non-rechargeable AAA battery.
** This is a AAA-powered battery charger for the headset’s rechargeable battery.
2Palm
charger**
AAA
battery***
®
Ultralight Wireless Headset
Small,
medium,
and large
soft gel
ear tips
Earloop
Charging your headset
SECOND Draft Palm, Inc. Confidential
Charging your headset
Your headset contains a rechargeable battery that must be fully charged before
using it for the first time. A fully charged headset can be used for up to 3 hours
before recharging.
There are two ways you can charge your headset:
With the AC charger that came with your Treo smartphone We recommend
that you use only the AC charger that came with your Palm Treo smartphone to
charge your headset, since no AC charger is included with your headset. Using
another AC charger may damage or destroy the headset and can void the
warranty on the product.
With the AAA battery-powered charger provided with your headset When you
use the AAA battery to charge your headset, you can get 2 full charges from it.
Before using, you must first charge your headset 1 hour for a minimum charge
and 3 hours for a full charge.
Palm®Ultralight Wireless Headset3
Charging your headset
SECOND Draft Palm, Inc. Confidential
Using your Treo’s AC charger
0
Connect the AC charger to the
1
charging adapter at the base of
the headset carrying pocket
and plug it into a wall outlet.
Insert the headset into the
2
headset carrying pocket. The
red indicator light flashes once
every five seconds while the
headset is charging.
Charge for three hours for a full
3
charge, and then remove the
AC charger from the headset
carrying pocket. The red
indicator light stops flashing
when the headset is fully
charged.
You are now ready to pair your headset and your smartphone. If the headset has
already been paired with your phone, then you can begin using it.
4Palm
®
Ultralight Wireless Headset
Using AAA battery-powered charger
SECOND Draft Palm, Inc. Confidential
0
Slightly twist the bottom of the AAA battery-powered charger counter-
1
clockwise and remove the battery holder.
Insert the AAA battery into the holder, slide the battery holder back
2
into the battery charger, and slightly turn clockwise.
!]
IMPORTANT
With the shirt clip facing you, separate the charging adapter from the
3
headset carrying pocket by grasping both attachments and gently
bending the outsides forward so that the components snap apart. Do
not twist the components apart.
Make sure you do not use a rechargeable battery.
Charging your headset
Palm®Ultralight Wireless Headset5
Charging your headset
SECOND Draft Palm, Inc. Confidential
Line up the opening on the battery
4
holder with the shirt clip on the
headset carrying pocket and push
the battery charger into the headset
carrying pocket until it snaps into place.
Insert the headset into the headset carrying pocket.
5
One AAA battery should be able to completely recharge your headset two times
before needing replacement. When the headset is fully charged, the red light
goes off.
6Palm
®
Ultralight Wireless Headset
Pairing your headset with your Bluetooth smartphone
SECOND Draft Palm, Inc. Confidential
Pairing your headset with your Bluetooth smartphone
Pairing, also known as forming a partnership, creates a unique and encrypted
wireless link between two devices enabled with Bluetooth
such as your Treo smartphone and your ultralight wireless headset.
If pairing is successful, the blue indicator light returns to flashing every five
seconds.
[*]
NOTE
Your headset should be turned off before you begin the pairing
process. If it is on, see Turning your headset on and off
it off.
Pairing with your Treo smartphone (Palm OS® versions)
0
Press and hold down the call control button until the headset status
1
indicator briefly glows blue, then flashes red and blue. The headset
is now in pairing mode for the next 60 seconds.
On your smartphone, press Applications and select Bluetooth ,
2
or tap the Bluetooth iconat the top of the screen.
Make sure the Bluetooth setting is on.
3
Select Setup Devices, and then select Hands-free Setup.
4
®
wireless technology,
for instructions on turning
Palm®Ultralight Wireless Headset7
Pairing your headset with your Bluetooth smartphone
SECOND Draft Palm, Inc. Confidential
Select Next. When the smartphone finds your headset, it displays
5
“Palm Ultralight” with a headphone icon next to it. Select Palm
Ultralight, and then select OK.
A status message appears, telling you that your smartphone is
6
connecting with your headset. When your smartphone asks for a
passkey, enter 0000, and then select OK.
If the Device Select screen appears, select Headset and select Next.
7
On the confirmation screen, select Done.
8
Pairing with your Treo smartphone (Windows Mobile versions)
0
Press and hold down the call control button until the headset status
1
indicator briefly glows blue, then flashes red and blue. The headset
is now in pairing mode for the next 60 seconds.
On your smartphone, go to the Today screen and tap Bluetooth .
2
Check the Turn on Bluetooth box if it is not already checked.
3
8Palm
®
Ultralight Wireless Headset
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.