Plantronics ML Series Getting Started Manual

GET STARTED

ML Series Bluetooth® Headset

TAKE A GOOD LOOK

Be safe! Please read the
safety guide before
using your new headset.

MICRO USB CHARGING PORT

• Use with the AC wall charger:

1 hour before first use
2 hours (100% charge)

• Do not use headset while charging

VOLUME BUTTONS

• Volume: up/down (tap + or – buttons per

level change)

LED

• Charging (solid red)

• Low battery (3 red flashes at powering on)

• On a call (blue flash every 2 seconds)

• Missed call (purple flashes. Repeats

for 5 minutes or until cancelled).

• Pairing mode (repeating red/blue flashes)

CALL BUTTON

• Take a call or end it (1 tap)

• Redial (2 taps)

• Initiate phone’s voice-dialing

(2 second press until tone is heard)

• Reconnect lost Bluetooth connection

(1 tap if the headset doesn’t automatically
reconnect)

• Activate pairing mode after initial set up

(press until red/blue LED flashes)

• Cancel missed call LED (1 tap)

POWER SWITCH

• On (slide to reveal black)

• Off (slide to reveal red)

CONNECT TO YOUR PHONE

“Pairing” is the set-up process of
introducing your headset to your
phone.

Before using your headset for the
first time, you must pair it with
your Bluetooth-enabled phone.

Pairing is a one-time process
unless your phone loses the
connection or you want to pair a
new phone.

PLT_ M L X X

1. READY

Activate the Bluetooth feature on
your phone, then get phone to add
/ search / discover new Bluetooth
devices.

Phones Have Different Menus to
Select From:

iPhone: Settings > General >

Bluetooth > On (starts the search
for devices)

BlackBerry® smartphone:
Settings/options > Bluetooth: On >
Search for devices

VIDEO TUTORIAL FOR USA:

www.plantronics.com/pairing

2. SET

First Time, Right out of the Box:

With headset turned off, activate
Bluetooth pairing mode by sliding
Power switch on. The LED flashes
red/blue to indicate pairing mode.

Pairing New
Phone/Reconnecting Original:

With headset turned off, slide
Power switch on. Press and hold
the Call button until the LED
flashes red/blue.

3. CONNECT

Select “PLT_MLXX” from the list
of Bluetooth devices shown on
your phone.

If phone ask s for a passcode,
enter four zeros (0000). You may
see

****

on screen. Some phones
also ask to confirm headset
connection after pairing.

Headset LED will stop flashing
red/blue once successfully
paired/connected.

You can now make a call using
your phone’s keypad or
voice-dialing feature.