Page 1
ML15
User guide
Page 2
Contents
Headset overview 3
Be safe 3
Pair 4
Get paired 4
Pair Another Phone 4
Reconnect 4
Charge and
Charge 5
Adjust the
The basics 6
Power 6
Make/Take/End Calls 6
Volume 6
Decipher the lights 6
Support 7
fit 5
fit 5
2
Page 3
Headset overview
Power
Pair
Call answer/end
Be safe
Charge port
Headset LED (indicator light)
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
3
Page 4
PLT_ML15
0000
Pair
Get paired
Pair Another Phone
The first time you power on your headset, the pairing process begins.
1 Press and hold the Call button until the LEDs flash red and blue.
2 Activate Bluetooth
• iPhoneSettings > Bluetooth > On*
• AndroidSettings > Bluetooth:On > Scan for devices*
®
on your phone and set it to search for new devices.
NOTE *Menus may vary by device.
3 Select "PLT_ML15." If necessary, enter four zeros (0000) for the passcode or accept the
connection. Once successfully paired, the LEDs stop flashing.
After pairing your headset to your phone, you may want to pair another phone.
1 Power on your headset.
2 Press and hold the Call button until the indicator light flashes red and blue.
3 Activate Bluetooth on your phone and set it to search for new devices.
4 Select "PLT_ML15."
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Reconnect
Once successfully paired, the headset indicator lights stop flashing.
Your Bluetooth headset has an effective range of up to 10 metres. If you lose connection, your
headset will try to reconnect. If your headset doesn't reconnect, tap the Call
connect through the phone's Bluetooth device menu.
button or manually
4
Page 5
R
L
Charge and fit
Charge
Adjust the fit
Your new headset has enough power to pair and make a few calls. It takes 2 hours to fully charge
the headset; the indicator light turns solid blue once charging is complete.
The universal-fit ear tip has a thin loop that bends to gently tuck into the contours of either ear.
To adjust the fit, you can rotate the ear tip on the headset or add the optional clip-on ear loop.
5
Page 6
The basics
Power
Make/Take/End Calls
Volume
Decipher the lights
To power on or off, press the Call button until the indicator light flashes blue once (on) or
red once (off).
Answer or end a call
Tap the Call button.
Redial
To dial the last number you dialled, double-tap the Call
Voice dial
If your phone supports voice-activated dialling, press and hold the Call
wait for the phone prompt and then tell the phone to dial the number of a stored contact.
Adjust the volume on your phone to control your headset volume.
Your headset has an indicator light
button press.
Some examples of what you will see are:
• Solid red until charging is complete and then solid blue
• Flashing red and blue during pairing
• Double red flash when battery is low
• Double blue flash at incoming call
that flashes in response to a change in status or after a
button.
button for 2 seconds and
6
Page 7
Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
©
2018 Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under licence. All other trademarks
are the property of their respective owners.
Patents: US D681,602; D699,215; CN ZL201230490196.9; EM 002109645; and TW D157594.
205483-07 (01.18)
Plantronics B.V.
Scorpius 171
2132 LR Hoofddorp
Netherlands
Loading...