Plantronics gamecom 818, gamecom p80 User Manual

Page 1
Gamecom 818/P80
User Guide
Page 2
Contents
Headset overview 3
Be safe 3
Charge, connect, configure 4
Charge 4 Connect 4 Configure 4
The basics 6
Adjust the volume 6 Pair 6 Play/pause music* 6 Mute 6 Range 6 LEDs and tones 7
Support 8
2
Page 3
Headset overview
Be safe
Mute: Lift the boom to full stop Unmute: Lower the boom
Increase volume
Headset LEDs
Power on/off Pair button
Track forward
Headset charge port
Decrease volume
Play/pause button
Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset.
3
Page 4
Charge, connect, configure
Charge
Connect
Charge your headset first. It takes 2-4 hours to fully charge. When charging, the headset LEDs are solid red and turn off once your headset is charged.
NOTE When your headset battery is low, you will hear 3 tones as a reminder to charge your headset.
Your headset and adapter are factory pre-paired and automatically connect with each other.
Plug the wireless adapter into a USB port on your system. The wireless adapter flashes blue then turns solid blue to indicate the headset is connected to your system.
Configure
Your headset works with any USB-compliant computer. The headset is automatically set as the active audio device once the wireless USB Adapter is plugged in.
PS4
1
Go to Settings > Audio Devices and select:
2
Input Device > Plantronics Gamecom 818
3
Output Device > Plantronics Gamecom 818
4
Output to Headphones > All Audio
5
Volume Control > Adjust to maximum
6
Adjust Microphone Level > Adjust as necessary
Windows7, Windows8
1
Go to Start > Control Panel > Sound. (To view Sound, you may need to first select Small icons or Large icons from the dropdown menu.)
4
Page 5
2
On the Playback tab, select the “Plantronics GameCom 818” as the Sound Playback device.
3
Select Properties, and on the Levels tab, adjust the Volume Slider as necessary. Do not select the mute option. Select OK.
4
On the Recording tab, select the “Plantronics GameCom 818” headset as the Sound Recording device.
5
Select Properties, and on the Levels tab, adjust the Volume Slider as necessary. Do not select the mute option. Select OK.
6
Select OK.
Mac OS X
1
Go to System Preferences > Sound
2
On the Output tab, select the “Plantronics GameCom 818” headset as the Sound Output device.
3
Adjust the Output Volume Slider as necessary. Do not select the mute option.
4
On the Input tab, select the “Plantronics GameCom 818” headset as the Sound Input device.
5
Adjust the Input Volume Slider as necessary.
6
Select OK.
5
Page 6
The basics
Adjust the volume
Pair
Play/pause music*
Tap the Volume up (+) or Volume down (–) button.
NOTE For minimum volume, press and hold the (–) button.
Press and hold the headset Power headset and adapter LEDs flash blue and turn solid blue when successfully paired.
1
Press to play or pause music.
2
Press
NOTE *May not work with all applications.
to skip forward to the next track.
button and the adapter Pair button for 4 seconds. The
Mute
Range
During a call, lift the boom to a full stop to mute the microphone.
CAUTION Do not force the boom past its upper or lower limits.
The headset has a wireless range of up to 40 feet. However, wireless performance may be affected by nearby objects including walls, metal items, and other wireless devices. When you move the headset to the edge of its wireless range, audio may become distorted and will eventually cut out (the wireless adapter flashes blue when out of range). Move closer to the wireless adapter to restore clear audio.
NOTE If your headset and adapter are separated and lose their connection after being successfully
paired, they automatically reconnect when they come back into range of each other. If they remain out of range for more than 30 seconds, the headset goes into sleep mode, but reconnects automatically with the adapter once it is back in range. If the headset is out of range for more than 15 minutes, it automatically shuts off.
6
Page 7
LEDs and tones
The following tables describe the headset LEDs and tones.
Action/Status LED Tone
Power on Steady blue glow 3 high tones
Power off Steady red glow, then off 3 low tones
Power low 3 high tones - played at 10 minute
intervals
Out of range Flashing blue
Charging, headset powered on
Charging, headset powered off
Pairing Headset and adapter rapidly flash blue
Connected to adapter
Standby/Battery Save/Out of Range
Boom mute on Low tone-high tone
Boom mute off High tone-low tone
Volume up High tone
Volume down Low tone
Volume maximum
Connected: Solid purple until charging complete
Unconnected: Red/purple flash until charging complete
Solid red until charging complete
when in pairing mode
Solid blue glow
Pulsing blue glow
2 high tones
Volume minimum 2 low tones
7
Page 8
Support
EN
Tel: 0800 410014
AR
Tel: +44 (0)1793 842443*
CS
Tel: +44 (0)1793 842443*
DA
Tel: 80 88 46 10
DE
Deutschland 0800 9323 400 Österreich 0800 242 500 Schweiz 0800 932 340
EL
Tel: +44 (0)1793 842443*
ES
Tel: 900 803 666
*Support in English
FI
Tel: 0800 117095
FR
Tel: 0800 945770
GA
Tel: 1800 551 896
HE
Tel: +44 (0)1793 842443*
HU
Tel: +44 (0)1793 842443*
IT
Tel: 800 950934
NL
NL 0800 7526876 BE 0800 39202 LUX 800 24870
NO
Tel: 80011336
PL
Tel: +44 (0)1793 842443*
PT
Tel: 0800 84 45 17
RO
Tel: +44 (0)1793 842443*
RU
Tel: 8-800-100-64-14 Tel: +44 (0)1793 842443*
SV
Tel: 0200 21 46 81
TR
Tel: +44 (0)1793 842443*
For warranty details, go to plantronics.com/warranty.
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc. Plantronics BV
345 Encinal Street Santa Cruz, CA 95060 United States
©
2015 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All
other trademarks are the property of their respective owners.
Patents pending
204617-06 (04.15)
South Point Building C Scorpius 140 2132 LR Hoofddorp, Netherlands
Loading...