Plantronics BBG2, BACKBEATGO User Manual
en For Your Safety
fr Pour Votre Sûreté
es Para Su Seguridad
pt Para Sua Segurança
2
en
3
Important Safety and Operational Information
Please read the following safety and operational instructions before
using your headset/headphones and accessories. Please keep these
instructions for your reference. Additional warnings may be present
on the product, packaging, or in the user instructions. This symbol
identifies and alerts the user to the presence of important safety
warnings.
General
Operating, storage and charging temperature is 0°C to 40°C (32°F
to 104°F).
Warnings
• Exposure to high volume sound levels or excessive sound pressure
may cause temporary or permanent damage to your hearing.
Although there is no single volume setting that is appropriate
for everyone, you should always use your headset/headphones
with the volume set at moderate levels and avoid prolonged
exposure to high volume sound levels. The louder the volume, the
less time is required before your hearing could be affected. You
may experience different sound levels when using your headset
/headphones with different devices. The device you use and its
settings affect the level of sound you hear. If you experience
hearing discomfort, you should stop listening to the device
through your headset/headphones and have your hearing checked
by your doctor. To protect your hearing, some hearing experts
suggest that you:
1. Set the volume control in a low position before putting your
headset or headphones on your ears and use as low a volume
as possible.
2. Avoid turning up the volume to block out noisy surroundings.
Whenever possible, use your headset or headphones in a quiet
environment with low background noise.
3. Limit the amount of time you use headsets or headphones at
high volume levels.
4. Turn the volume down if the sound from the headset/
headphones prevent you from hearing people speaking near
you.
See www.plantronics.com/healthandsafety for more information on
headsets/headphones and hearing.
• Use of a headset/headphones that cover both ears will impair
your ability to hear other sounds. Use of such headset/
headphones while operating a motor vehicle or riding a bicycle
may create a serious hazard to you and/or others, and is illegal in
most regions.
• Check local laws regarding use of a mobile phone and headset/
headphones while driving. If you use the headset/headphones
while driving ensure your attention and focus remain on driving
safely.
• Observe all signs and instructions that require an electrical device
4
en
5
or RF radio product to be switched off in designated areas, such
as gas/refueling stations, hospitals, blasting areas, potentially
explosive atmospheres, or aircraft.
• This product is not a toy. Never allow children to play with the
product — small parts may be a choking hazard.
• Install and use eartips and earbuds in accordance with the
instructions provided. Do not force eartips or earbuds down the
ear canal. If either becomes lodged in the ear canal, seek medical
attention immediately.
• Ensure eartips and earbuds are kept clean and free of ear wax
buildup to maintain the specified product performance.
• If you experience a skin irritation after using this product,
discontinue use and contact Plantronics.
• Applying excessive pressure to the headset/headphones may injure
the outer ear. Do not wear the headset /headphones while sleeping
or in other situations where pressure may be exerted against the
headset/headphones.
• Do not disassemble or insert anything into the product or charger
because this may cause damage to the internal components or
cause injury to you.
• If the product or charger: overheats; has a damaged cord or plug;
has been dropped or damaged; has been dropped into water,
disconnect any charger from its power supply, discontinue use of
the product and contact Plantronics.
• Prevent rain, moisture or other liquid from coming into
contact with the product to protect against damage to your
headset / headphone or injury to you. This warning is not
applicable for ruggedized or sports products which are designed
to withstand contact with moisture.
To avoid the risk of electric shock, explosion, fire or leakage of
corrosive or toxic chemicals, observe the following charging and
battery warnings:
Charging Warnings
• Use only the charger supplied by Plantronics to charge the
product. Do not use the chargers for any other purpose. Ensure
that the voltage rating corresponds to the power supply you
intend to use.
• If your headset / headphone is designed to be charged with your
mobile phone charger using a custom adapter, use only mobile
phone chargers approved and provided by your mobile phone
manufacturer.
• Charge the headset / headphones according to the instructions
supplied with the unit.
• Plug the AC adapter or charger into an outlet that is near the
equipment and will be easily accessible.
• Never charge the battery where the temperature may fall below
0°C (32°F) or rise above 40°C (104°F) — for example, in an
unattended motor vehicle.
• Avoid charging the battery while it is unattended.
6
en
7
Battery Warnings
To avoid the risk of explosion, fire or leakage of toxic chemicals,
please observe the following warnings:
Do not dispose of the product or battery in a fire or heat above
•
100ºC.
• Do not open, deform or mutilate the battery as there may be
corrosive materials which can cause damage to eyes or skin and
may be toxic if swallowed.
• Do not attempt to open the headset/headphones or remove the
battery.
Recycling: Your product and batteries must be recycled or disposed
of properly. Contact your local recycling center for information on
proper disposal.
Regulatory Notices
FCC Requirements Part 15
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. Changes or modications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception which can be determined by turning the radio or television
off and on, the user is encouraged to try to correct interference by one or more
of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on another circuit.
4. Consult the dealer or an experienced radio/TV technician for help.
Exposure To Radio Frequency Radiation
This device and its antenna must not be collocated or operated in conjunction
with any other antenna or transmitter. To comply with FCC RF exposure
requirements, only use supplied antenna. Any unauthorized modication to
the antenna or device could void the user’s authority to operate this device.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Industry Canada Radio Equipment
The term “IC:” before the radio certication number only signies that Industry
Canada technical specications were met. Operation is subject to the following
two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation
of the device. “Privacy of communications may not be ensured when using
this telephone.” This product meets the applicable Industry Canada technical
specications of the RSS210.
Loading...