Marque 2
M165
User Guide
Contents
What's in the Box 3
Headset Overview 4
Pairing 5
Pair First Time 5
Pair Another Phone 5
Charge 6
Fit 7
Adjust the Fit 7
The Basics 8
Make/Take/End Calls 8
Mute 8
Adjust the Volume 8
Stream Audio 8
More Features 9
Save Power 9
Decipher the Lights 9
Hear it Whisper 9
Disable Voice Commands 9
Technical Specifications 10
2
What's in the Box
Headset AC charger
Earloop Eartips
3
Headset Overview
Power button
Call button
Charge port
Headset LED (indicator light)
Volume/Mute button
/
4
Pairing
Pair First Time
Pair Another Phone
The first time you power on your headset, it begins the pairing process.
1
Put the headset on and turn it on.
•
iPhone and Android™ Smartphones Follow the voice-guided pairing instructions.
•
Other phones Use your phone's menu to:
2
While the headset LEDs are flashing red and white, activate Bluetooth® on your phone and set it
to search for new devices.
3
Select “PLT_M165.”
4
If your phone asks, enter four zeros (0000) for the passcode or accept the connection. The
indicator light stops flashing red and white once successfully paired.
Multipoint technology lets you pair a second phone and answer calls from either phone.
1
Power on your headset.
2
Press and hold the Call button until the indicator light flashes red and white or you hear
“pairing.”
3
While the indicator light flashes red and white, activate Bluetooth on your phone and set it
to search for new devices.
4
Select “PLT_M165.”
5
If your phone asks, enter four zeros (0000) for the passcode or accept the connection. The
indicator light stops flashing red and white once successfully paired.
5
Charge
Your new headset has enough power to pair and make a few calls. It takes two hours to fully
charge the headset; the indicator light turns off once charging is complete.
6
Fit
Adjust the Fit
The universal-fit eartip has a thin loop that bends to gently tuck into the contours of either ear.
1
Rotate the eartip on the headset or add the optional clip-on earloop to adjust the fit.
2
Replace the gel eartip with one of the two alternate sizes, if it feels loose or tight in your ear.
7
The Basics
Make/Take/End Calls
Mute
Answer a call
Choose:
•
Tap the Call button
Answer a second call
First, tap the Call button to end current call, then tap the Call button again to answer new
all.
c
End a call
Tap the Call button
Reject a call
Choose:
• Say “ignore” after call is announced, or
•
Press Call button for 2 seconds
C
all back last call
To dial your last number you dialed, double-tap the Call button
V
oice dial (phone feature)
Press the Call button
n
ame of a stored contact.
You can mute the microphone during a conversation.
to end current call.
.
for 2 seconds, wait for phone prompt and then tell the phone to dial the
Adjust the Volume
Stream Audio
During a call, tap the Volume/Mute
m
icrophone is muted, an alert repeats every 15 minutes.
Tap the Volume/Mute
Streaming audio is controlled using your phone, but when a call rings, the audio automatically
pauses to allow you to answer or ignore the call. Once the call is ignored or ends, the
streaming audio is resumed.
/ button to cycle through preset levels.
/ until you hear “mute on” or “mute off.” While the
8
More Features
Save Power
Decipher the Lights
Hear it Whisper
If you leave your headset powered on but out of range of your paired phone for more than 90
minutes, your headset will conserve its battery power by entering into a DeepSleep™ mode.
Once back in range with your phone, tap the Call button to exit DeepSleep mode. If your
phone is also ringing, tap the Call button again to answer your call.
Your headset has an indicator light that flashes in response to a change in status or after a
button press.
Some examples of what you will see are:
• Solid red until charging complete and then off
• Flashing red and white during pairing
• Triple red flash when less than 10 minutes of talk time
• Triple white flash at incoming call
Your headset tells you about status changes in English. For example:
“Power on”
“Pairing successful”
“Talk time (x) hours”
“Mute on”
“Lost connection”
“Recharge headset”
Disable Voice Commands
This headset only speaks and understands English. If you prefer to use the Call button to answer
or reject calls, you can disable the voice commands “answer” or “ignore.”
With the headset powered on, simultaneously press the Call and Volume buttons until you
s
ee the indicator light flash white two times. Repeat these steps to reactivate the commands.
9
Technical Specifications
Talk time
Standby time
Headset weight
DeepSleep technology
Multipoint technology
Charge connector
Battery type
Charge time (maximum)
Headset battery meter
Bluetooth version
Bluetooth profiles
Up to 7 hours*
Up to 11 days*
7 grams
• Activates when paired headset is out of range for over
90 minutes
• Provides up to 180 days* of battery readiness
Use one headset to answer calls from either of two
paired Bluetooth phones
Micro USB charging
Rechargeable, non-replaceable lithium-ion polymer
90 minutes for full charge
On-screen for iPhone, enabled by Find MyHeadset
v3.0
Advanced Audio Distribution Profile (A2DP), Wideband
Hands Free (HFP) Profile 1.6 and Headset (HSP) Profile
1.2
™
Operating and storage temperature
32°F – 104°F (0 – 40°C)
NOTE * Performance is dependent upon battery and may vary by device.
10
NEED MORE HELP?
www.plantronics.com/support
Plantronics, Inc. Plantronics BV
345 Encinal Street
Santa Cruz, CA 95060
United States
©
2012 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All
other trademarks are the property of their respective owners.
Patents US 5,712,453; Patents Pending
89142-06 (10.12)
South Point Building C
Scorpius 140
2132 LR Hoofddorp, Netherlands
Loading...