Plantronics 855 User Manual
BLUETOOTH® HEADSET
Bedienungsanleitung
Brugervejledning
¹Æã»Â²¸»¿ØƱúê
Guía del usuario
Käyttöopas
Guide de l'utilisateur
Guida dell'utente
Gebruikershandleiding
Brukerhåndbok
a
)NSTRUKCJAĺUYTKOWANIA
Manual do Utilizador
'HIDĺDEĺUTILIZARE
Руководство пользователя
Snabbstarthandbok
Bruksanvisning
+ULLANàMĺ+àLAVUZU
User Guide
TABLE OF CONTENTS
Welcome 3
What is Bluetooth? 3
Package Contents & Features 4
EN ENGLISH
Charging 5
Pairing 6
Custom Fit 8
Headset Controls 12
Stereo Headset Controls 13
Indicators 15
Range 15
Hands-Free Features 16
Optional Accessories 17
Troubleshooting 18
Product Specifications 19
Technical Assistance 19
2
Plantronics Voyager 855
WELCOME
Thank you for choosing the Plantronics Voyager™ 855 headset. To get the
most from your new headset, we recommend that you take the following
steps:
Read this User Guide, including all the safety information at the end of this
1.
guide, before you use your headset.
If you need assistance, please do the following:
2.
Follow the steps in the “Troubleshooting” section on page 18.
•
Contact the Plantronics Technical Assistance Center at
•
www.plantronics.com/support.
Visit www.plantronics.com/productregistration to register your headset online
3.
so we can provide you with the best possible service and technical support.
NOTE: If you are considering returning the product, please contact the Technical
Assistance Center first.
WHAT IS Bluetooth?
Bluetooth wireless technology provides a way for devices to communicate
with each other using short-range radio frequency instead of wires.
Any two Bluetooth devices can communicate as long as they both have
Bluetooth turned on, are within range and have been paired—a quick
“handshake” that connects the two devices.
Bluetooth range is up to 10 metres. Obstructions, such as walls or other
electronic devices, can cause interference or shorten the effective range.
For optimal performance, place your headset and phone on the same side
of your body.
EN ENGLISH
Plantronics Voyager 855
3
PACKAGE CONTENTS & FEATURES
1
EN ENGLISH
5
2
4 3
6
Call control button (on/off)
1.
Mute microphone
2.
(Pause/Play*)
Volume up/down
3.
(Track forward/back*)
7
8
9
Extendable boom
4.
Microphone port
5.
Ear loop stabiliser
6.
Stereo plug-in cable
7.
Sound isolating ear bud
8.
(small, medium and large)
AC Charger 100 – 240V
9.
* Stereo mode only and requires
Bluetooth AVRCP (Audio Video
Remote Control Profile). See
“Stereo Headset Controls” on
page 13 for details.
4
Plantronics Voyager 855
CHARGING
Before you use your headset for the first time, charge it for at least 1 hour.
It takes approximately 3 hours to fully charge your headset.
Connect the charger cable to the headset.
1.
Plug the charger into a power outlet.
2.
While your headset is charging the indicator glows red. When your
headset is fully charged, the indicator turns off.
WARNING: Do not use your headset while it is connected to the charger.
CHECK THE CHARGE LEVEL
When your headset is on, simultaneously press and hold the call control
button and the volume down button for about two seconds. The indicator
flashes red to show the charge level.
EN ENGLISH
Battery Level Red Flashes
More than 2/3 full 1
1/3 to 2/3 full 2
Less than 1/3 full 3
Plantronics Voyager 855
5
PAIRING
Pairing is the process of introducing your headset to your phone. Before
using your headset for the first time, you must pair it with your Bluetooth
phone. Normally you only need to pair your headset with your phone once.
EN ENGLISH
QUICKPAIR™ TECHNOLOGY
Your new headset includes Plantronics QuickPair technology to simplify
the Bluetooth setup process. The first time you turn your headset on, your
headset automatically enters pairing mode for 10 minutes. Once paired
successfully, your headset stays on for instant use.
If not successfully paired after 10 minutes, your headset automatically
powers off. When you turn the headset on again, it automatically goes
into pairing mode until successfully paired with a Bluetooth phone.
To pair your headset for the first time:
Turn ON the Bluetooth feature on your phone.
1.
2
3
1
4
TIP: For most phones, select Settings/Tools > Connections > Bluetooth > On.
See your phone’s user guide for more information.
Press and hold the call control button to turn on your headset. (The indicator
2.
flashes red/blue to show that the headset is on and in pairing mode.)
TIP: If you don’t see the red/blue flash, press and hold the call control
button to turn your headset off, and then press and hold the call control
button again until you see the red/blue flash.
Use the commands on your phone to locate your headset.
3.
TIP: For most phones, select Settings/Tools > Connections > Bluetooth >
Search > 8XXPlantronics. See your phone’s user guide for more information.
When prompted for the passkey, enter 0000.
4.
When pairing is successful, the red/blue indicator on your headset turns off.
Your headset is now connected and ready to use.
6
Plantronics Voyager 855
Loading...