Let us provide you with the best possible service and technical
support. After reviewing this user guide, if you need additional
assistance or have any product questions, please contact:
• www.plantronics.com/support
Please refer to the separate Safety Instructions booklet for
important product safety information prior to installation or use of the
product.
REGISTER YOUR PRODUCT ONLINE
Visit www.plantronics.com/productregistration to register your product
online so we can provide you with the best possible service and
technical support.
2
Page 3
PACKAGE CONTENTS & FEATURES
Indicator light
Call control
button
Microphone
Adjustable ear
loop
Ear tip
Charging jack
AC power adapter
Volume control
CHARGING & POWERING
1
2
CHARGING
Before using, you must first charge your
headset.
20 minutes = minimum charge
2 hours = full charge
Indicator light is solid red when battery is
charging.
NOTE For the best user experience, keep
your headset fully charged.
CAUTION Do not use headset while
charging and do not connect the charger
while the headset is in use.
POWERING
Press and hold
the call control
button for
2 seconds to
power on.
Press and hold
the call control
button for
3 seconds to
power off.
3
Page 4
PAIRING
d
h
r
”
(Or see
y
)
h
p
urned off
(
wi
Searc
Add
eadse
f
pai
iri
S
This headset comes with QuickPairTM technology so pairing with your
toot
hone is even easier. Follow the instructions below to pair your
phone with your headset for the first time.
UICKPAIR FEATURE INSTRUCTION
SETTINGS
SETTINGS
Time and Date
Phone Settings
Bluetooth
Sound Settings
Network Services
Security
Reset Settings
BLUETOOTH
Discover/
Search
BLUETOOTH
220Plantronics
PASSKE Y
Step One:
Prepare Phone—
Turn on Bluetooth
or most phones,
o toSettings/
menu an
t
toot
o
elect
and
On.
the user guide for
our phone.
Step Two:
Prepare Headset—
Pairing Mode
egin with headset
t
headset on
. Turn
hold call
ntrol button for 2
econds until the light
lashes blue) and it
ll automatically go
nto pairing mode,
lashing red and blue.
Step Three:
Pairing—
Add Headset to Phone
or most phones,
o toSettings/Tools
Bluetooth >
a Device, then
elect
220Plantronics.”
For passkey enter
. H
lash blue when paired
success
ully. It is now
powered on and ready
o use.
NOTE: Normally you only need to
r the headset and handset once.
headset has been previously paired with another device, follow
pa
ng instructions on the next page.
0000
h
t will
4
Page 5
PAIRING
1.
If headset has previously been paired with another device, please
follow these instructions for pairing a second time. Ensure that
the headset is fully charged. For instructions on set-up and pairing
with other Bluetooth devices, please consult your Bluetooth device
user guide.
Begin with headset turned off.
1. Press and hold down the call
control button for 8 seconds
until the headset status
indicator begins to flash blue
then red.
The headset is now in pairing
mode for the next 120
seconds.
2.
3.
220
2. While the headset is flashing,
use the phone menu to
search for Bluetooth devices
and select “220Plantronics.”
3. When prompted for a
passkey, enter 0000. Headset
will flash blue when paired
successfully.
NOTE: The headset can pair to multiple Bluetooth devices, but will
only connect to one device at a time. The headset will automatically
connect to the last device to which it was connected.
5
Page 6
ADJUSTING FIT
1.
Lift ear loop.
3.
2.
Right Ear
Swivel ear loop to the right or left
for right or left ear wearing.
4.5.
Left Ear
Place ear loop
behind ear.
6
Pivot headset to
place speaker
into ear.
Position speaker and
align microphone
with mouth.
Page 7
USING YOUR HEADSET
ANSWERING/ENDING/MAKING CALLS
For best performance, position your mobile phone on the same side of
your body as the headset.
To answer or end a call, briefly press the call control button.
To make a call, enter number on your phone, press send, and the call
is automatically transferred to headset; no need to press call control
button.
NOTE: When answering a call, wait until you hear a ring from the
headset itself (not the ring from your phone), before pressing the call
control button.
ADJUSTING THE VOLUME
Briefly push up or down on the volume button for incremental volume
steps. You will hear two tones (high tone followed by low tone) at the
volume limit.
WARNING Do not use headphones/headsets at high volumes for
an extended period of time. Doing so can cause hearing loss. Always
listen at moderate levels. See
for more information on headsets and hearing.
www.plantronics.com/healthandsafety
7
Page 8
USING YOUR HEADSET
ADDITIONAL FEATURES
Redialling Last Number
To activate last number redial,
double press the call control
button. You will hear a high tone
after each key press.
Using Voice Dialling
With the headset on, press and
hold the call control button for
2 seconds to activate the voice
dialling.
NOTE To use voice activated
dialing, the voice dialling feature
must be enabled on your phone.
See your Bluetooth phone manual
for instructions.
Rejecting a Call
When receiving an incoming call,
press the call control button for
2 seconds to reject the call.
Switching a Call From Phone to
Headset
To switch an active call from your
phone to your headset, press the
call control button for 3 seconds.
Switching a Call From Headset
to Phone
To switch an active call from your
headset to your phone, press the
INDICATOR LIGHTS
Headset StatusHeadset Indicator Light
Powering onBlue flashes. Repeat.
Powering offRed appears and goes off.
Charging battery Red solid light.
Low batteryRed flashes.
Pairing modeBlue/red flashes.
Missed call Purple flashes. Single press the call control
button to cancel.
Ringing Purple flashes. Briefly press call control button
to answer the call. Press call control button for
2 seconds to reject the call.
8
Page 9
ACCESSORIES
AVAILABLE FOR PURCHASE
76015-01
Vehicle
charging
adapter
76016-01
USB headset
charger
To order, please contact your Plantronics supplier or go to
www.plantronics.com.
TROUBLESHOOTING
PROBLEMSOLUTION
My headset does
not work with my
phone.
I did not enter
my passkey.
Callers cannot
hear me, or I
cannot hear
caller/dialling
tone.
Headset was not in pairing mode when mobile
phone menu selections were made. See page 4
“Bluetooth Pairing”.
Incorrect menu selections were made on your
mobile phone. See page 4 “Bluetooth Pairing”.
Your phone did not locate the headset.
Repeat the pairing process on page 4.
Incorrect menu selections were made on your
mobile phone. Repeat the pairing process on
page 4.
The headset is not turned on. Press the call
control button for 2 seconds until you hear a
beep or see the indicator light glow blue to turn
headset on.
Your headset is out of range. Move the headset
closer to the phone or Bluetooth device.
Your headset battery is drained. Charge your
battery using the AC power adapter supplied.
The listening volume is too low. Press the
volume key up (toward the ear loop) to increase
the sound heard in the headset.
9
Page 10
PRODUCT SPECIFICATIONS
Talk Time*Up to 6 hours
Standby Time*Approximately 200 hours
Charge Time2 hours
Range
Power Requirements5V DC – 300 mA
Battery TypeLithium Ion Polymer
Version
Storage and Usage Temperature50F–104F (10C – 40C)
Supports Bluetooth hands-free and headset profiles.
*Performance may vary by device. Headset can last up to four days without charging,
based on average talk time of 1.5 hours per day.
Bluetooth standard 33 feet (10 meters)
Bluetooth 2.0
TECHNICAL ASSISTANCE
Visit our Web site at www.plantronics.com/support for technical
support including frequently asked questions, compatibility and
accessibility information.
10
Page 11
MODEL & COUNTRY INFORMATION
See package for product model number and refer to the table below
for approved use.
WARRANTY
For warranty information, please refer to the included product
warranty card or visit