Page 1
Plantronics Explorer® 210 Series
User Guide
Page 2
Welcome
Congratulations on purchasing a Plantronics headset. This
User Guide contains instructions for setting up and using your
Plantronics Explorer
please refer to the For Your Safety booklet for important safety,
charging, battery and regulatory information.
®
210 series headset. Before using this product,
Getting Assistance
The Plantronics Technical Assistance Centre is ready to assist you.
You can find answers to frequently asked questions, ask a question
using e-mail, receive service over the Internet, or speak directly with
a representative. Visit www.plantronics.com/support or call your country
support line mentioned at the back of this user guide.
Registering Your Product
Visit www.plantronics.com/productregistration to register your
product online so we can provide you with the best service and
technical support.
ii
Page 3
Contents
Welcome ...............................................................................................ii
What is Bluetooth®? ............................................................................iv
Package Contents, Features and Accessories .....................................1
Charging Your Headset ........................................................................ 2
How to Charge Your Headset Using the AC Charger .................. 2
Pairing Your Headset ........................................................................... 3
Plantronics QuickPair
How to Pair Your Phone With Your Headset for the First Time .....4
How to Pair Your Headset if it Has Been Previously Paired With
Another Device ...........................................................................5
Adjusting the Fit ...................................................................................6
Headset Controls ................................................................................. 7
Range ..................................................................................................8
Indicator Lights .................................................................................... 9
Hands-Free Features ......................................................................... 10
Troubleshooting ................................................................................. 11
Product Specifications ....................................................................... 12
™
Technology ............................................. 3
iii
Page 4
What is Bluetooth®?
Bluetooth wireless technology provides a way for devices to
communicate with each other using short-range radio frequency instead
of wires. Any two Bluetooth devices can communicate as long as they
both have Bluetooth turned on, they are within range and they have
been paired — a quick “handshake” process that connects the two
devices. Bluetooth range is up to 10 metres (33 feet). Obstructions such
as walls or other electronics devices can cause interference or shorten
the effective range.
NOTE For optimal performance, place your headset and phone on the
same side of your body.
iv
Page 5
Package Contents and Features
Headset Front
Headset Back
Power on/off
Call control button
Indicator light
Volume control
Earloop
Microphone
Speaker/eartip
Charging jack
Plantronics Explorer® 210 Series Accessories*
Vehicle Charging Adapter
#76777-01
USB Headset Charger
#76016-01
Vehicle Power Charger
AC Charger
100 – 240V
#78583-01
* Not included. To order, please contact your Plantronics supplier or go
to www.plantronics.com
1
Page 6
2
How to Charge Your Headset Using the AC Charger
Before using your headset for the first time, charge it for at least
20 minutes. A full charge takes approximately two hours.
1 Connect the AC charger to a power outlet.
2 Plug the AC jack into the charging jack on the headset.
While your headset is charging, the indicator glows red. When your
headset is fully charged, the indicator turns off. Do not use your headset
while it is connected to the charger.
NOTE Never charge the battery where the temperature may fall below
0°C (32°F) or rise above 40°C (104°F) – for example, in an unattended
motor vehicle. Do not charge the battery while it is unattended.
Charging Your Headset
CH A RG I NG T IME
2 hours ...................
Full charge
20 minutes ..............
Minimum charge
before first use
1
2
Page 7
Pairing Your Headset
Pairing is the process of introducing your headset to your phone.
Before using your headset for the first time, you must pair it with
your Bluetooth phone. Normally, you need to pair your headset with
your phone only once.
™
Plantronics QuickPair
Your new headset includes Plantronics QuickPair technology to simplify
the Bluetooth setup process. The first time you turn your headset on,
your headset automatically enters pairing mode for 10 minutes (the
indicator light flashes red and blue). Once paired successfully, your
headset stays on for instant use.
If not successfully paired after 10 minutes, your headset automatically
goes to standby mode. When you turn the headset off then on again,
it automatically goes into pairing mode until successfully paired with a
Bluetooth phone.
Technology
3
Page 8
Pairing Your Headset – First Time
SETTINGS
SETTINGS
Time and Date
Phone Settings
Bluetooth
Sound Settings
Network Services
Security
Reset Settings
BLUETOOTH
BLUETOOTH
Discover/
Search
8BK;JEEJ>
8BK;JEEJ>
(NNFb Wdjhed_Yi
PASSKEY
0000
1
2
3
How to Pair Your Phone With Your Headset for the First Time
1 Turn on the Bluetooth feature on your phone.
For most phones, select Settings/Tools > Connections >
Bluetooth > On. See your phone’s user guide for more information.
2 Turn the headset on.
Turn on your headset by sliding the power switch forward. Wait until
the indicator light flashes blue and red.
If you don’t see the red/blue flash,turn the headset off, wait, then
turn it on again. Wait until you see the red/blue flash.
3 Use the commands on your phone to locate your headset.
For most phones, select Settings/Tools > Connections > Bluetooth >
Search > 2XXPlantronics. See your phone’s user guide for
more information.
4 When prompted for the passkey, enter 0000.
Pairing is successful when the indicator on your headset flashes
blue. Your headset is now connected and ready to use.
4
4
Page 9
Pairing Your Headset
BLUETOOTH
BLUETOOTH
Discover/
Search
8BK;JEEJ>
8BK;JEEJ>
(NNFb Wdjhed_Yi
PASSKEY
0000
1
2
3
4
How to Pair Your Headset if it Has Been Previously Paired
With Another Device
1 Turn the headset off.
Slide the power switch off, then wait until the indicator turns red
and then turns off.
2 Turn the headset on.
Slide the power switch on. After the headset is powered on, press
and hold the call control button until the indicator light continues to
flash red and blue.
3 Use the commands on your phone to locate your headset.
For most phones, select Settings/Tools > Connections > Bluetooth
> Search > 2XXPlantronics. See your phone’s user guide for
more information.
4 When prompted for the passkey, enter 0000.
Pairing is successful when the indicator on your headset flashes
blue. Your headset is now connected and ready to use.
5
Page 10
Adjusting the Fit
1
Right Left
2
1 To remove the earloop, gently pull up on earloop near the
Plantronics name until you hear a snap.
2 Position earloop as shown above, then gently snap back
onto post.
3 Place the earloop behind your ear.
4 Rotate the headset so that the speaker/eartip rests
comfortably in your ear.
5 Align the microphone with the corner of your mouth.
Callers can hear you best when you point the microphone towards
the corner of your mouth.
4
3
5
6
Page 11
Headset Controls
Turn on the headset
Turn off the headset Slide the power switch off, then wait until the
Answer a call Briefly press the call control button.
Reject a call When phone rings, press and hold the call control
Make a call Enter number on your phone, press send, and
Adjust the volume
Slide the power switch on, then wait until the
indicator glows blue. You will hear ascending tones.
indicator glows red. You will hear descending
tones. When power is off, indicator stays off.
When you receive a call, your phone may ring
before your headset rings. Wait until you hear
the ring in your headset before you press the call
control button to answer the call.
button until you hear a single low tone.
the call is automatically transferred to headset;
no need to press call control button.
Tap the volume + button to increase volume.
At the upper limit you will hear two tones. Tap button to decrease volume level. (There are eight
volume levels.)
WARNING Do not use headphones/headsets
at high volumes for an extended period of time.
Doing so can cause hearing loss. Always listen
at moderate levels. See www.plantronics.com/
healthandsafety for more information on headsets
and hearing.
7
Page 12
Headset Controls
Transfer a call from
headset to phone
Transfer a call from
phone to headset
While in a call, press and hold the call control
button until you hear a single low tone.
While in a call, press and hold the call control
button until you hear a single low tone.
Range
To maintain a connection, keep your headset within 10 metres (33 feet)
of the Bluetooth device. If there are obstacles between your headset and
the device, you may experience interference. For optimal performance,
place your headset and phone on the same side of your body.
Audio quality degrades as you move out of range. When you are far
enough away to lose the connection, you hear a high tone in the headset.
NOTE The headset attempts to reconnect for 30 seconds. If you move
back in range after 30 seconds pass, you can manually reconnect by
pressing the call control button.
NOTE Audio quality is also dependent upon the device with which the
headset is paired.
8
Page 13
Indicator Lights
Headset Status Headset Indicator Light
Powering on Steady blue, then intermittent flashes
Powering off Red appears and goes off
Standby Blue intermittent flashes
Charging battery Red solid light. Light indicator turns off when
Low battery Triple red flashes
Pairing mode Blue/red alternating flashes
Missed call Purple flashes. Press the call control button
Incoming call Triple blue flashes when ringing.
(changes to standby mode)
battery is fully charged and headset is off.
to cancel flashing light.
9
Page 14
Hands-Free Features
If your phone and your wireless service provider both support hands-free
operation, you can use the following features:
Redial the last number To activate last number redial, double
Using Voice Dialling With the headset on, press the call
Reject a call When receiving an incoming call, press the
press the call control button. You will
hear a double tone after each doublebutton press.
control button for 2 seconds to activate
the voice dialling.
NOTE To use voice-activated dialling, the
voice-dialling feature must be enabled on
your phone. See your Bluetooth phone
manual for instructions.
call control button for 2 seconds to reject
the call.
10
Page 15
Troubleshooting
My headset
does not work
with my phone.
I did not enter
my passkey.
Callers cannot hear
me, or I cannot
hear caller/dialling
tone.
Headset was not in pairing mode when mobile
phone menu selections were made. See page 5
“Pairing Your Headset.”
Incorrect menu selections were made on
your mobile phone. See page 5 “Pairing Your
Headset.”
Your phone did not locate the headset.
Repeat the pairing process on page 5.
Incorrect menu selections were made on your
mobile phone. Repeat the pairing process on
page 5.
The headset is not turned on or the headset is
not connected to mobile phone. Press the call
control button for 2 seconds until you hear a
beep or make sure the power switch is in the ON
position by sliding switch up and down again.
Your headset is out of range. Move the headset
closer to the phone or Bluetooth device.
Your headset battery is drained. Charge your
battery using the AC power adapter supplied.
The listening volume is too low. Tap the volume +
key to increase the sound heard in the headset.
11
Page 16
Product Specifications
Talk Time* Up to 7 hours
Standby Time* Approximately 8 days or 200 hours
Charge Time 2 hours
Range Up to Bluetooth standard 10 metres (33 feet)
Power Requirements 5V DC – 180 mA
Battery Type Rechargeable, non-replaceable,
Storage/Usage
Temperature
Version Bluetooth 2.0
Supports Bluetooth hands-free and headset profiles.
* Battery enabled. Performance may vary by device.
lithium ion polymer
10 °C – 40 °C (50 °F – 104 °F)
12
Page 17
For safety information, see the separate “For Your Safety” booklet.
For warranty information, see the separate “2 Year Warranty” leaflet or visit
www.plantronics.com
en
Plantronics Ltd
Wootton Bassett, UK
Tel: 0800 410014
ar
www.plantronics.com
cs
Czech Republic
www.plantronics.com
da
Danmark
Tel: 80 88 46 10
de
Plantronics GmbH
Hürth, Deutschland
Kundenservice:
Deutschland 0800 9323 400
Österreich 0800 242 500
Schweiz 0800 932 340
el
www.plantronics.com
Για περισσότερες
πληροφορίες:
es
Plantronics Iberia, S.L.
Madrid, España
Tel: 902 41 51 91
fi
Finland
Tel: 0800 117095
fr
Plantronics Sarl
Noisy-le-Grand
France
ga
Plantronics BV
Regus House
Harcourt Centre
Harcourt Road
Dublin 2
Ireland
Service ROI: 1800 551 896
he
:רתאב רקב ,ףסונ עדימל
www.plantronics.com
hu
További információk:
www.plantronics.com
it
Plantronics Acoustics
Italia Srl
Milano, Italia
Numero Verde: 800 950934
nl
Plantronics B.V.
Hoofddorp, Nederland
Tel: (0)0800 Plantronics
0800 7526876 (NL)
00800 75268766 (BE/LUX)
no
Norge
Tel: 80011336
pl
6Wnjonh`VÈl^åXZ_
^c[dgbVX_^/
lll#eaVcigdc^Xh#Xdb
pt
Portugal
Tel: 0800 84 45 17
ro
EZcigj^c[dgbVIJ^^
lll#eaVcigdc^Xh#Xdb
ru
dНОНКМЗСДКЫМ¿¾
ЗМУНПЛ¿ХЗ¾
XXXQMBOUSPOJDTDPN
sv
Sverige
Tel: 0200 21 46 81
tr
Daha fazla bilgi için:
www.plantronics.com
13
Page 18
МЛ05
Plantronics B.V.
Scorpius 140
2132 LR Hoofddorp
Netherlands
www.plantronics.com
© 2009 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics
Explorer, QuickPair and Sound Innovation are trademarks or registered trademarks of
Plantronics, Inc. The Bluetooth word mark and logo are owned by Bluetooth SIG, Inc. and
any use of such marks by Plantronics, Inc. is under license. All other trademarks are the
property of their respective owners.
U.S. Patents Pending
82216-03 Rev A
Loading...