Plantronics 200460-01, 200450-01 User manual

Backbeat® FIT

User Guide

Contents

Welcome 3

What's in the box* 4

Get Paired 5

Headset overview 6

Take control 7

Power on or off 7
Play or pause music 7
Skip to next track 7
Play previous track 7
Volume 7
Mute 7
Use voice commands 7
Answer or end a call 7
Decline a call 7
Pairing mode 7

Charge 8

Fit 9

Armband/storage 10

Check battery level 11

DeepSleep Mode 12

Stay connected 13

Backbeat FIT Updater app 14

Specifications 15

2

Welcome

Congratulations on purchasing your new Plantronics product. This guide contains instructions
for setting up and using your Plantronics Backbeat® FIT.

Please refer to the safety instructions for important product safety information prior to
installation or use of the product.

3

What's in the box*

Headphones

Armband

USB charge cable

NOTE *Contents may vary by product.

4

Get Paired

The first time you power on your headphones, they begin the pairing process.

1

Power on the headphones. The indicator light located on the right headphone, flashes red
and blue to indicate the pairing process

2

Activate Bluetooth® on your phone and set it to search for new devices.

•

iPhone Settings > General > Bluetooth > On*

•

Android™ Settings > Bluetooth: On > Scan for devices*

*Menus may vary by device.

3

Select “PLT_BBFIT.” If your phone asks, enter four zeros (0000) for the passcode or accept the
connection. Once successfully paired, indicator lights stop flashing red and blue and you hear
“pairing successful.”

5

Headset overview

Power button

Headset indicator light

Call button

Charge port

Volume button: Increases or decreases volume

Audio button: Play or pause music, track forward or track back

6

Take control

Power on or off

Play or pause music

Skip to next track

Play previous track

Volume

Mute

Use voice commands

Answer or end a call

Decline a call

Press the Power button until you hear “power on"/"power off."

Tap the Audio button.

Press the Audio

Press the Audio button until you hear the confirmation tone to restart the current track.
Press the button twice (each press until the confirmation tone sounds) to go to the previous
track.

To increase the volume, tap the Volume
Volume
*Android phone must be set to medium/high or audio will sound to low.

While on a call, tap the Audio button. You will hear “mute on” or “mute off.” An alert repeats
every 5 minutes when mute is on.

To activate your smartphone's voice controls, press the Call button until you hear the
confirmation tone.

Tap the Call

Press and hold the Call button for 2 seconds.

button.*

button twice.

button. To decrease the volume, press and hold the

button.

Pairing mode

To enter pairing mode after the first pairing process, start with the headphones powered off and
then press and hold the Power button until you hear "pairing."

7

Charge

Your new headphones have enough power to pair and listen to audio for a while. The door
covering the charging port is located on the right headphone. Open it with your fingernail.

It takes up to 2 hours to fully charge the headphones. While charging, the indicator light is red
and turns blue once charging is complete.

8

Fit

1

For the best sound performance and a secure comfortable fit, drape around the back of your
head.

2

Rotate the eartip between a plus and minus 20° range to achieve an optimal fit and sound
experience.

9

Armband/storage

Pouch to store headphones. Turn inside out to reverse into an armband to hold your phone
during a workout. An extra pocket resides inside to hold smaller phones or music devices.

10

Check battery level

To check the battery level tap the Power button while your headphones are powered on.
Your headphones will announce battery status.

"Battery full" = fully charged

"Battery level high" = medium to fully charged

"Battery level medium" = medium

"Battery level low" = less than 1 hour remaining

"Recharge headset" = under 15 minutes remaining

11

DeepSleep Mode

If you leave your headphones powered on but out of range of your paired phone for more than
10 minutes, your headset will conserve its battery power by entering into a DeepSleep® mode.

Once back in range with your phone, press the Power
phone is also ringing, tap the Call

button again to answer your call.

button to exit DeepSleep mode. If your

12

Stay connected

Bluetooth has a working “range” of up to 33 feet between the phone and the headphones
before audio degrades and the connection is lost.

Your headphones try to reconnect after a lost Bluetooth connection. If they can’t, tap any
button once or manually reconnect via the phone’s Bluetooth device menu.

13

Backbeat FIT Updater app

Update the firmware for your Backbeat FIT over your Bluetooth connection using the Backbeat
FIT Updater mobile application. The Updater app is available for both iOS and Android and can
be downloaded from the Apple App Store or GooglePlay respectfully.

1

Make sure that your headphones are paired and connected to your phone.

2

Tap the "Update Firmware" button on the homescreen of the app.

3

Keep your headphones and phone within close range of each other during the update.

4

You will be prompted to plug your headphones into a power source to initiate the update. The
update will start automatically once this step has been performed. The indicator light flashes
purple when Backbeat FIT is in update mode.

You will be automatically notified when new firmware is released and by keeping your Backbeat
FIT up to date you can ensure your headset is performing at its best.

14

Specifications

Talk/Listening time

Standby time

DeepSleep mode

Operating distance (range)

Headphones weight

Audio

Noise reduction

Moisture protection

Charge connector

Battery type

Up to 8 hours listen/6 hours talk*

Up to 14 days*

Provides up to 180 days*

Up to 33 feet from phone or tablet Up to 33 feet from
phone or tablet

24 grams

HQ custom SBC codec,13mm neodymium speakers,
Frequency response 50-20,000 Hz, Total Harmonic
Distortion <3%, sensitivity 105 dBspl/mW @ 1 kHz

Digital Signal Processing (DSP) :

• Full duplex echo cancellation

• Real time noise reduction

• Voice clarity

P2i nano-coating for sweat and moisture protection

Micro USB charging

Rechargeable, non-replaceable lithium-ion polymer

Charge time (maximum)

Bluetooth 3.0

Operating and storage temperature

Service and support

2 hours (Power requirements 5V DC - 180 mA)

Advanced Audio Distribution Profile (A2DP) v1.2, Audio/
Video Remote Control Profile (AVRCP) v1.4, Handsfree
Profile (HFP) v1.6 and Headset Profile (HSP) v1.1

32°F – 104°F (0 – 40°C)

www.plantronics.com/support

NOTE * Performance is dependent upon battery and usage and may vary by device.

15

NEED MORE HELP?

plantronics.com/support

Plantronics, Inc. Plantronics BV

345 Encinal Street
Santa Cruz, CA 95060
United States

©

2014 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All

other trademarks are the property of their respective owners.

Patents US 5,712,453; Patents pending

202221-06 (07.14)

South Point Building C
Scorpius 140
2132 LR Hoofddorp, Netherlands