Planex Communications BC PCBA01 User Manual

11n wireless module

BC-PCBA01

User Manual

BOCCO is a wi-fi connected robot designed to keep you connected to your loved ones while you are
away from home.
Send a voice message from the BOCCO app, and he’ll play it back at home. Speak into BOCCO, and
he’ll send a message to other family members’ smartphones. You can also send a text message from
the app which BOCCO will read out loud.

BOCCO main board is key parts of BOCCO. This board have Mediatek MT7620 (router-on-a-chip
includes an 802.11n MAC and baseband, a 2.4 GHz radio and FEM, a 580 MHz MIPS® 24K™ CPU
core) and linux system.

This board have SPI EEPROM and NAND Flash. For SPI EEPROM software image is flashed before
PCBA. For NAND Flash, application is installed via Web after assembry.

6V power DC jack

It has DC Jack and connect 6V DC Power.

MT7620

MT7620 includes Wi-Fi module and MIPS CPU. On the chip, linux (OpenWRT) works.
For linux system, 2Gb SDRAM, 4Gb NAND Flash and 64Mb SPI Flash are on board.

mic and speacker connector

It has connectors to connect mic and connector.
It has an audio codec module and an audio amp. The board can record voice message and play
the sounds.

micro USB interface

BOCCO main board specification

Summary

BOCCO

BOCCO main board (this board)

software instalation

Board specification

It has USB interface for debug.

20 pins

It has 20 pin interface. Pins include UART, SPI, GPIO, and VCC / GND.