Planet Technology WPG-100 User Manual

Wireless Presentation Gateway
WPG-100
Quick Installation Guide

Version 1.0

Thanks for your purchase our wireless presentation gateway. WPG-100 is

an easy installation, convenient operation and user friendly projecting

device. It turns your current Projector into a high-end Projector. With the

WPG-100 your Projector become a wireless device and PC/Notebooks

will be easier to project screen to Projector.Package Content

1 x WPG-100

1 x CD Disk (User’s Guide included)

5V DC Power adapter

Quick Installation Guide

Wall mount kit

Quick Start

1) Connect projector VGA cable to WPG-100 box VGA connector and turn

on projector power.

2) Turn on WPG-100.

• When Projector shows the default menu on the screen as below, it

indicates the WPG-100 is ready now.

3) Make sure your PC LAN port or WLAN interface is enabled already, and
connect your PC with WPG-100 (wireless default SSID is WPG-100).

4) Open your browser and enter the WPG-100 IP address to get in
WPG-100 web home page.

• The default IP address of WPG-100 is 192.168.1.10. If you have modified
the IP address, you can refer to the IP address shown on the left-down
corner of projector screen.

5) Please select “Download” option and press “Login” button. The Password is
empty.

2011-E60010-000

6) You will see a file download dialog box appear, press “Run” to execute

the installation program.

7) After install the program, WPG-100 shortcut

will come out on the

desktop.

8) If there is any firewall, please make sure your personal firewall has allow
WPG-100 software to pass through.

9) Enter the LOGIN CODE and press “OK”.

• You can see the login code on the projector screen

10) Click the “Play” button to start projection!