All brand and product names mentioned in this manual are trademarks
and/or registered trademarks of their respective holders.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipm ent generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
To assure continued compliance. (example-use only shielded interface cables when
connecting to computer or peripheral devices). Any changes or modifications not expressly
approved by the party responsible for compliance could void the user ’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the Following
two conditions: ( 1 ) This device may not cause harmful interference, and ( 2 ) this Device
must accept any interference received, including interference that may cause undesired
operation.
Federal Communication Commission (FCC) Radiation Exposure Statement
2
This equipment complies with FCC radiation exposure set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches)
during normal operation.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and
telecommunication terminal Equipment and the mutual recognition of their conformity
(R&TTE)
The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications
Terminal Equipment and Satellite Earth Station Equipment) As of April 8,2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and
use it. However, special attention must b e p ai d to the dang ers of el ectri c shock a nd static
electricity when working with electrical equipment. All guidelines of this and of the
computer manufacture must therefore be allowed at all times to ensure the safe use of
the equipment
.
WEEE regulation
To avoid the potential effects on the environment and human health as a result of
the presence of hazardous substances in elect rical and electroni c equipment, end
users of electrical and electronic equipment should understand the meaning of
the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted
municipal waste and have to collect such WEEE separately.
Revision
User’s Manual for PLANET 802.11g Wireless USB2.0 Adapter
Model: WL-U356M
Rev: 1.0 (November. 2006)
Part No. EM-WLU356M
Complying with the IEEE802.11b/g standard, the WL-U356M provides simple, reliable, and
high-speed wireless connectivity for both desktop and laptop users. The WL-U356M is capable
of offering up to 54Mbps at 2.4GHz frequency bands.
Support of WPA (Wi-Fi Protected Access) with AES encryption keeps your wireless
communications away from unauthorized access and ensures secure data transfer. Backward
compatible with 802.11b standard, the WL-U356M is easier to join existing network and protect
your original investments. The WL-U356M also takes advantage of flexibility and convenience
of USB2.0 interface. Easy installation and true "Plug & Play" operation offer fully mobility and
high availability. The WL-U356M is a perfect choice for users who are looking for wireless
connectivity.
1.1 Features
z IEEE 802.11b/g standard compliant
z Provides up to 54Mbps data rate at 2.4GHz
z Data rate auto-fallback mechanism increases connection reliability
z Supports USB 2.0 for high speed data transfer
z Supports WPA with AES and TKIP encryptions
z 64/128-bit WEP encryption
z Support of Ad-Hoc / Infrast ructure mode
z Support of most popular operating systems including Windows 98SE/Me/2000/XP
z Plug-and-Play
z Wireless connectivity without the hassles and cost of running cables
General Application
WL-U356M offers a fast, reliable, cost-effective solution for wireless access to the various
network scenarios:
1. Remote access to corporate network for information
E-mail, file transfer and terminal service.
2. Difficult-to-wire environments
Historical or old buildings, public occasions, venues and open area where it is
difficult to wire.
3. Frequently changing environments
Factories, Retailers, and Offices that frequently change locations and rearrange the
workplace
4. Temporary network access
Events, exhibitions, construction sites or some important occasions that require
temporary network access.
5
5. Access to database for mobile workers
Doctors, nurses, retailers, white-collar workers who need access to database while
roaming in the hospital, retail store or office.
6. SOHO (Small Office and Home Office) users
SOHO users who are in need of easy-to-install and wide coverage networking.
1.2 Specification
Standards
Modulation
Channels
Network Protocol
Interface
Transmit Power
Sensitivity
LED
WEP Key Bits
Dimensions
Unit Weight
Powe
Certifications
-20º~70º C
10% to 85%, Non-Condensing
5% to 90%, Non-Condensing
1.3 Package Contents
Before installation, please check the items of your package. The package should include the
following items:
One Wireless USB Adapter
One CD-ROM (Including the Configuration Utility, Driver and User’s Manual)
One Quick Installation Guide
6
If any of the above items is missing, contact your supplier for
support.
1.4 Minimum System Requirements
Before installation, please check the following requirements with your equipment.
Pentium Based (above) IBM-compatible PC system with one vacancy USB2.0/1.1 port
CD-ROM drive
Windows 98SE/Me/2000/XP Operating System
At least 10MBytes of free disk space for utility and driver installation
1.6 Installation Considerations
Beware of the walls and ceilings. Each wall or ceiling can reduce your wireless cover range
form 3-90 feet. Properly position your Access Poi nt s, Residential G ateways, and computers so
that the number of walls or ceilings residing between Access Points and clients is minimized.
Building materials make a difference – A solid metal door or aluminum studs may have a
negative effect on signal coverage range. Try to properly position Access Points and
computers with wireless adapters so that there would be less obstacles existing between
them.
Keep your wireless LAN devices away from microwaves, cordless phones and child incubators.
It is likely that the latter will cause interferences to the operation of your wireless LAN devices.
1.7 About This Guide
This User Manual contains information on how to install and configure your Wireless Adapter
to get your network started accessing the Internet. It will guide you through the correct
configuration steps to get your device up and running.
Note and Caution in this manual are highlighted with graphics as below to indicate important
information.
7
Chapter 2 Designing Your Wireless Network
The PLANET WL-U356M supports up to 54 Mbps connections. This card is fully compliant with
the specifications defined in IEEE802.11g standard. It is designed to
computers and supports Windows 98SE/Me/2000/XP
complement USB port
2.1 PLANET WL-U368M
The status LED indicators of the PLANET WL-U356M are described in the following.
z Lnk/Act ON (Green): Indicates a valid connection
z Lnk/Act Flashing: Indicates the Adapter is transmitting or receiving data.
Figure 2-1
8
Chapter 3 Installation Procedure
Before you proceed with the installation, it is necessary that you have enough information
about the Wireless USB Adapter. Follow the procedure described below in this chapter to
install the USB adapter under Windows 98SE/Me/2000/XP.
3.1 Configuration Utility & Driver Installation
The following installation operates under Window XP. The procedure also applies to Windows
98SE/Me/2000.
Note 1: If you had ever installed the other Wireless Cards before, please uninstall
Note 2: Please install the configuration utility before insert WL-U356M into the USB
1. Insert the bundled CD into the CD-ROM drive to launch the autorun program. Once
completed, a welcome menu screen will appear.
2. Click the “WL-U356M Utility” hyperlink in the WL-U356M field to initiate the installation
procedure. You will see the below InstallShield Wizard dialog box. Please click “Next” to
continue.
Note: If the above screen does not appear, click “Start” at the taskbar. Then, select “Run”
the existed drivers and utilities first.
port of the computer.
and type “D:\Utility\WL-U356M\setup.exe”, where D is your CD-ROM drive.
9
3. You may click “Browse” to specify the Destination Folder you prefer for the installation of
utility. Otherwise, you can keep the default setting and click “Next” to proceed.
4. Once the utility is installed, select “Finish” to complete the utility installation.
If your operating system is Windows XP/Server 2003, the below window will pop up.
Please select “Continue Anyway” to continue.
10
If your operating system is Windows 2000, the below window will pop up. Please choose
“Yes” to go on.
5. Please insert WL-U356M into a vacant USB port on the computer.
Note: For Windows 2000, please directly skip to step 7. If your operating system is
Windows 98SE, Windows will automatically detect and install the device and ask you to
insert the system installation CD to complete the entire procedure.
11
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.