All brand and product names mentioned in this manual are trademarks and/or
registered trademarks of their respective holders.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installatio n. This e quipme nt generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
To assure continued compliance. (example-use only shielded interface cables when
connecting to computer or peripheral devices). Any changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two
conditions: ( 1 ) This device may not cause harmful interference, and ( 2 ) this Device must
accept any interference received, including interference that may cause undesired operation.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency
I
exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches)
during normal operation.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and
telecommunication terminal Equipment and the mutual recognition of their conformity
(R&TTE)
The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications
Terminal Equipment and Satellite Earth Station Equipment) As of April 8,2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and
use it. However, special attention must be paid to the dangers of electric shock and static
electricity when working with electrical equipment. All guidelines of this and of the
computer manufacture must therefore be allowed at all times to ensure the safe use of the
equipment
.
WEEE regulation
To avoid the potential effects on the environment and human health as a result of
the presence of hazardous substances in electri cal and electroni c equipment, end
users of electrical and electronic equipment should understand the meanin g of the
crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal
waste and have to collect such WEEE separately.
Revision
User’s Manual for PLANET 802.11g Wireless USB Adapter
Model: WL-U356L
Rev: 1.0 (November. 2007)
Part No. EM-WLU356L
Complying with the IEEE802.11b/g standard, the WL-U356L provides simple, reliable, and
high-speed wireless connectivity for the desktop users. The WL-U356L i s capable of offering up
to 54Mbps at 2.4GHz frequency bands.
Support of WPA and WPA2 (Wi-Fi Protected Access) with AES encryption keeps your wireless
communications away from unauthorized access and ensures secure data transfer. Backward
compatible with 802.11b standard, the WL-U356L is easier to join existing network and protect
your original investments. The WL-U356L also takes advantage of flexibility and convenience of
PCI interface.
1.1 Features
z IEEE 802.11b/g standard compliant
z Provides up to 54Mbps data rate at 2.4GHz
z Supports 64/128-Bit WEP, WPA, WAP2, WPA-PSK, and WPA2-PSK functions for high
level of security
z Support of Ad-Hoc / Infrastructure mode
z Support of most popular operating systems including Windows 98SE/ME/2000/XP/Vista
z Wireless connectivity without the hassles and cost of running cables
z Compliant with USB 1.1/2.0 standard
z Seamless integration with existing LAN through any IEEE 802.1b/g complaint Access
Point.
1.2 Specification
Interface
Standards Conformance
Data Transfer Rate
Dimensions
Unit Weight
Certifications
Operating Temp
Storage Temp
Operating Humidity
15dBm typically @ 802.11b
13dBm typically @ 802.11g
54Mbps: Typical -68dBm @ 10% PER
11Mbps: Typical -83dBm @ 8% PER
LNK
Windows 98SE / Me / 2000 / XP / Vista
77 x 26 x 12 mm
10g
FCC ,CE
0 – 40 degree C
-10 – 70 degree C
10% to 85%, Non-Condensing
1.3 Package Contents
Before installation, please check the items of your package. The package should include the
following items:
1 x WL-U356L
1 x Driver and User’s manual CD
1 x Quick Installation Guide
1 x USB cable
If any of the above items is missing, contact your supplier for support.
1.4 Minimum System Requirements
Before installation, please check the following requirements with your equipment.
Pentium Based (above) IBM-compatible PC system with one vacancy USB port
CD-ROM drive
Windows 98SE/Me/2000/XP/Vista Operating System
At least 10MBytes of free disk space for utility and driver installation
1.5 Installation Considerations
Beware of the walls and ceilings. Each wall or ceiling can reduce your wireless cover range
form 3-90 feet. Properly position your Access Points, Residential Gateways, and computers so
2
that the number of walls or ceilings residing between Access Points and clients is minimized.
Building materials make a difference – A solid metal door or aluminum studs may have a
negative effect on signal coverage range. Try to properly position Access Points and computers
with wireless adapters so that there would be less obstacles existing between them.
Keep your wireless LAN devices away from microwaves, cordless phones and child incubato rs.
It is likely that the latter will cause interferences to the operation of your wireless LAN devices.
1.6 LED Status of PLANET WL-U356L
The status LED indicators of the USB wireless adapter are described in the following.
z Link ON (Green): indicates a valid connection
z Link Flashing: indicates the WL-U356L is transmitting or receiving data.
3
Chapter 2 Installation Procedure
2.1 Configuration Utility & Driver Installation in XP OS
The following installation operates under Window XP. The procedure also applies to Windows
98SE / Me / 2000
Note 1: If you had ever installed the other Wireless Cards before, please uninstall
Note 2: Please install the configuration utility before insert WL-U356L into the USB
1.Insert the bundled CD into the CD-ROM driver. The Wizard should run automatically to
display the menu screen.
2.Select suitable utility link according to your system. In this example, Windows
98/ME/2000/XP utility is selected.
the existed drivers and utilities first.
port of the computer.
3. Follow the Install Shield Wizard steps, and click “Finish” when done.
4
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.