Planet Technology WGSD-1022C User Manual
WGSD-1022C
8-Port 10/100Mbps + 2-Port Gigabit TP/SFP Combo
Managed Switch
Cost-effective Desktop Size / Fiber Capability / Group Managed
Switch
The PLANET WGSD-1022C is a desktop size Layer 2 Managed Fast
Ethernet Switch. It provides 8 10/100Mbps Fast Ethernet ports and 2
Gigabit TP/SFP interfaces. The compact-size design Switch not only fits into
space-limited environment but also is mountable in a 19-inch rack with
attached rack-mounting kits. The equipped Gigabit SFP slot makes the
WGSD-1022C with capability of fiber link for distance extending and can
handle extremely large amounts of data in a secured topology which is
linked to a backbone or high capacity servers.
The various supports of QoS mode and VLAN features make the WGSD-1022C meet the needs of SOHOs, SMBs and enterprises in effective data traffic control
such as VoIP, video streaming and multicast applications. The key features are shown as below:
• IP Stacking up to 8 units • Rapid Spanning Tree • IGMP Snooping
• 802.1Q VLAN • SNMP / SNMP Trap • SFP slots, Fiber link capability
Enhanced Layer 2 Features
The WGSD-1022C can be programmed for enhanced switch management functions, such as per port speed conguration, Port Trunking, VLAN, Rapid Spanning
Tree, QoS, bandwidth control and IGMP Snooping. The WGSD-1022C provides Port-based VLAN, 802.1Q Tagged VLAN and the VLAN groups allowed on the
WGSD-1022C will be maximally up to 255. Via supporting port trunking, the WGSD-1022C offers the operation of a high-speed trunk combining multiple ports. It
also provides four groups of up to 8 ports for trunking and supports fail-over.
Efficient Management – Stacking Management
For efficient management, the WGSD-1022C is equipped with console interface, Web interface and SNMP agent. With its built-in Web-based management, the
WGSD-1022C offers an easy-to-use, platform-independent management and configuration facility. It supports standard Simple Network Management Protocol
(SNMP) and can be managed via any standard-based management software. For text-based management, the WGSD-1022C can also be accessed via Telnet and
the console port.
One of the management features of WGSD-1022C is the IP Stacking function support. It helps network managers to easily configure up to 8 switches in the same
series via one single one IP address instead of connecting and setting each unit one by one.
Key Features
PHYSICAL PORT
8-Port 10/100Base-TX RJ-45 •
2-Port Gigabit TP/SFP combo interface•
LAYER 2 FEATURES
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard•
Auto-negotiation and half duplex/full duplex modes for all 10Base-T/100Base-TX and 1000Base-T ports.•
High performance of Store–and-Forward architecture, broadcast storm control and runt/CRC ltering eliminate erroneous packets to optimize the •
network bandwidth
Data Sheet
1
IEEE 802.1Q Tagged based VLAN and Port-based VLAN•
NAS Clients
Backbone / Internet
P
WGSD-1022C
Workgroup Switch
VoIP Phone Printer
100Base-TX UTP
1000Base-SX/LX Fiber-optic
1000
1000
1000
File Server
Up to 4 Trunk groups, each trunk can be up to maximum 8 port with 1.6Gbps bandwidth(Full Duplex Mode)•
IEEE 802.1d, IEEE 802.1w, classic Spanning Tree Algorithm or Rapid Spanning Tree support•
QUALITY OF SERVICE
4 priority queues on all switch ports.•
Strict priority and Weighted Round Robin (WRR) CoS policies•
QoS and bandwidth control on each port•
MULTICAST
IGMP Snooping v1 and v2•
IGMP Port and Group policy•
SECURITY
IEEE 802.1x Port-based Authentication, RADIUS server authentication•
MAC address Filtering and MAC address Binding•
Port Mirroring to monitor the incoming or outgoing traffic on a particular port•
WGSD-1022C
MANAGEMENT
WEB-based, Telnet, Console Command Line management•
Access through SNMP v1 and v2c set and get requests.•
Four groups (history, statistics, alarms, and events) of embedded remote monitoring (RMON) agents for network monitoring and trafc analysis•
EMI standards comply with FCC, CE class A•
Applications
Workgroup Switch
With 8 10/100Mbps copper ports and 2 Gigabit-Ethernet fiber ports, the WGSD-1022C provides a cost-effective and high-performance solution for
power users.
Data Sheet
2
Loading...