Planet Technology VIP-150T User Manual

SIP IP Phone

-- with PSTN Connectivity

User’s Manual

Table of Contents

Chapter 1 Overview of the VIP-150T...............................................................................................1

1.1 Hardware Overview................................................................................................1

1.1.1 Front View and Keypad function..................................................................1

1.1.2 Back View....................................................................................................4

1.1.3 Specification of connector............................................................................4

1.2 Software Features and Specification......................................................................5

Chapter 2 Configuring the VIP-150T through LCD Phone menus....................................................7

2.1 Initialize VIP-150T..................................................................................................7

2.2 LCD Menu Configuration........................................................................................8

Chapter 3 Configuring the VIP-150T through Web Pages..............................................................14

Step 1. Browse the IP Address predefined via Keypad..............................................14

Step 2. Input the login name and password...............................................................14

Step 3. Enter the web interface main screen..............................................................15

Step 4. Start to configure............................................................................................15

1. Network Interface............................................................................................16

2. SIP Configurations..........................................................................................19

3. System Configuration......................................................................................21

4. PPPoE Configuration......................................................................................22

5. Voice Setting...................................................................................................23

6. Phone Book.....................................................................................................24

7. DDNS Configuration........................................................................................25

8. Version Information.........................................................................................26

9. Password........................................................................................................27

10. Firmware Upgrade........................................................................................28

11. Reboot...........................................................................................................29

Chapter 4 Configuring the VIP-150T through Telnet command lines..............................................30

4.1 [help] command....................................................................................................30

4.2 [quit] command.....................................................................................................30

4.3 [debug] command.................................................................................................31

4.4 [reboot] command................................................................................................31

4.5 [pbook] command.................................................................................................31

4.6 [commit] command...............................................................................................32

4.7 [ping] command....................................................................................................32

4.8 [time] command....................................................................................................33

4.9 [ifaddr] command..................................................................................................33

4.10 [pppoe] command...............................................................................................34

4.11 [flash] command.................................................................................................35

PLANET VIP-150T User’s Manual

4.12 [sysconf] command............................................................................................35

4.13 [sip] command....................................................................................................36

4.14 [security] command............................................................................................37

4.15 [voice] command................................................................................................37

4.16 [tos] command....................................................................................................39

4.17 [ddns] command.................................................................................................40

4.18 [bureau] command.............................................................................................41

4.19 [rom] command..................................................................................................41

4.20 [passwd] command............................................................................................42

Chapter 5 Upgrading Software on the VIP-150T............................................................................44

5.1 From LCD Phone Menu.......................................................................................44

5.2 Web Management................................................................................................45

5.3 Remote Control: Telnet.........................................................................................45

PLANET VIP-150T User’s Manual

Function

Chapter 1 Overview of the VIP-150T

VIP-150T is a full-featured IP-based telephone set via Ethernet base communication. Over the office LAN connection, it provides IP-PBX solution such as station-to-station call, IP call and local PSTN/PBX Extension call via PSTN Gateway.

VIP-150T provides two 10/100BaseT switch/hub RJ-45 ports allow connecting to office LAN and PC simultaneously. It is compatible with ADSL or Cable Modem provided by ITSP, ISP or Carrier Company to provide VoIP services to residential and SOHO application. VIP-150T is also an integrated Analog Phone provides IP call or PSTN call selection. When external power is down, it can be a Plain Old Telephone set (POTs).

It provides internal high-quality speakerphone, programmable keys and feature buttons. VIP-150T also embedded with a dot matrix of two lines 24 characters LCD, which can display date and time, calling party name, calling party number, and digits dialed and etc.

Note:

(**): May be not available right now, please contact with your distributor.

1.1 Hardware Overview

1.1.1 Front View and Keypad function

LCD

Speed

Keypad Speaker

PLANET VIP-150T User’s Manual

function

150T

If in communication with IP side, user can press HOLD to hold IP side,

then press PSTN to pick up PSTN side, after that can press HOLD again

with PSTN side, user must hang up PSTN side before

♦ LCD: 2 lines, 24 character Dot Matrix display. ♦ C: Jump out current LCD menu. ♦ ç : Move to previous selection or clear previous data. ♦ è : Move to right or next selection. ♦ OK: Press OK to confirm the modification. ♦ Direct Line (DL) Button 1 – 10: User press DL button after off-hook to do speed dial

according to phone book data from 1-10 (please refer to LCD configuration-3.Phone Book; Advanced Configurations via Telnet- 5.[pbook] command, or Web

Configuration-Phone Book chapter.

♦ Number 1 –10, * and #: The function is as the same as the general phone set.

Corresponding list of keypad and symbol:

1 “1” 2 “A” ; “ B” ; “C” ; “2” 3 “D” ; “E” ; “F” ; “3” 4 “G” ; “H” ; “I” ; “4” 5 “J” ; “K” ; “L” ; “5” 6 “M” ; “N” ; “O” ; “6” 7 “P” ; “Q” ; “R” ; “S” ; “7” 8 “T” ; “U” ; “V” ; “8” 9 “W” ; “X” ; “Y” ; “Z” ; “9”

* “.” ; “@” ; “_” ; ”-“ ; “,” ; “!” ; “?” ; “*” 0 “0” ; “Space” # “#”

♦ MUTE: Mute the voice of MIC and let others can’t hear from user in communication. ♦ PSTN: Press PSTN to switch VIP-150T as PSTN or IP Phone Mode. In PSTN mode,

“PSTN” characters will be displayed on LCD left bottom side, then users can dial out as if standard telephone set in PSTN; in IP Phone mode, “PROXY ” characters will be displayed on LCD left bottom side. (**)

1. When VIP-150T is in PSTN mode, only PSTN and SPEAKER key can work.

2. On LCD will display ”…Incoming Call... ” to inform user when VIPhas both IP and PSTN side incoming calls.

Note:

to retrieve IP side.

4. If in communication pick up IP side.

PLANET VIP-150T User’s Manual

are effective only

♦ HOLD: To hold a call, after press HOLD button, both sides will hear hold tone. ♦ SPEED: Press SPEED and number (Phone book index) after off-hook can do speed

dial according to phone book data (please refer to 3.LCD configuration-6. Phone Book or Advanced Configurations via 4.Telnet- 5.[pbook] command).

♦ FORWARD: Forward an incoming call to another IP device. (Please refer to LCD

configuration-Forward Type) (**)

♦ MESSAGE and its indicated LED light: When having missed incoming calls, the

MESSAGE LED will be flashing. User can check the information of missed calls by pressing the MESSAGE button. (**)

♦ TRANSFER:

1. Transfer a call to the third site. When A and B are in communication, A wants to

transfer this call to C, A can press TRANSFER button, now B will hear hold tone, and A will hear dial tone, then A can press phone number of C, after C picks up, A can talk with C, after A hangs up, B and C can be connected.

Note:

2. Change characters to be capital or lowercase: when pressing TRANSFER before press letters can switch input type of letters.

♦ REDIAL: Redial the last outgoing call. ♦ + And -: Adjust the voice volume heard of communication. ♦ SPEAKER: Hand free mode. User can talk without picking up handset.

Note:

1. A cannot press phone number of C before hearing dial tone.

2. A cannot hangs up before C picks up.

All function keys mentioned above (except dialing keypad) in IP Phone mode. (**)

PLANET VIP-150T User’s Manual

There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and

status is regular, LED of LINK/ACT will light on; when

150T is transmitting or receiving data, LED will be flashing; when transmit

1.1.2 Back View

♦ DC 9V: DC 9V power input outlet ♦ LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5

cable.

♦ PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable ♦ Line: RJ-11 connector, connected directly to the PSTN analog line.

Note:

PC port. When network VIPrate is in 10 mbps or 100mbps, LED of 10/100 will light off or light on.

1.1.3 Specification of connector

1、 Ethernet Port：

Ethernet port is for connecting VIP-150T to network, transmit rate supports 10/100 Base-T.

Ethernet connector（LAN）

2、 RJ11connector：

RJ11 connector is for connecting VIP-150T with PSTN.

RJ11connector

PLANET VIP-150T User’s Manual

1.2 Software Features and Specification

Application:

l ISP/ITSP (Internet Telephony Service Provider) l IP-PBX with office telephony services l Multi-nation enterprise communication l SOHO Telephony

Calling Features

l Call Hold l Call Transfer l Call Forward (**) l 10 sets last number Redial l Ten configurable speed dials

Network Supported

l Fixed IP l Dynamic Host Configuration Protocol (DHCP) l PPPoE connection (When PPPoE disconnect, VIP-150T can automatically re-connect) l Behind NAT IP Sharing Device l Support QOS by setting DSCP (Differentiated Service Code Point) parameters of VoIP

packet

l Support 802.1p1q (VLAN) (**)

Audio Features

l G.711 a/μ-Law, G.723.1, G.729, G.729a l VAD, CNG l G.165/G.168 compliant echo cancellation l Programmable Dynamic Jitter Buffer l Bad Frame Interpolation l Gain/Attenuation Settings

PLANET VIP-150T User’s Manual

Provisioning and Configuration

l SIP (RFC3261) compliance l LCD configuration password protection l Provide Proxy Mode or Peer-to-Peer Mode (Non Proxy Server needed) selection l Ring tone, Speaker and Handset volume adjustable l Dial path selection (PSTN or IP mode) l Support DNS server inquiry

Management Features:

l Software Upgrade: TFTP/FTP download l Three easy ways for system configuration

- LCD Front Panel

- Web Browser

- TELNET

Environmental

l Humidity: 10 to 90 % (Non-condensing) l Operational Temperature: 0 to +40 °C

PLANET VIP-150T User’s Manual

2.3.4.5 first, then

Chapter 2 Configuring the VIP-150T through

1. After any configuration is made for the VIP-150T, user has to do Reboot

LCD Phone menus

Note:

the selection 7 “Reboot”.

2. We suggest user to set IP address via LCD menu 5→

go to chapter 3 to do other detail configurations via web browser.

2.1 Initialize VIP-150T

1. When power on the VIP-150T, the LCD screen shows as below. Now VIP-150T is running Boot sector program.

2. When VIP-150T finishes boot program initialization. User can see flashing greeting as below:

System Initializing…………..

VIP-150T

Board Start Booting

3. Then VIP-150T get into standby mode:

The main LCD screen would be shown as similar as above. “Proxy” means the VIP-150T is in Proxy Mode, and when VIP-150T is connected to SNTP server, on LCD will show current time captured from SNTP server.

4. When VIP-150T is under peer-to-peer mode, on LCD will show “P2P” instead of “Proxy”.

5. After pressing the PSTN button, the “Proxy” or “P2P” will be replaced by “PSTN”. Please notice that user must plug PSTN line in RJ-11 port when VIP-150T is in PSTN

Proxy 10:10:10 AM

P2P 10:10:10 AM

VIP-150T

PLANET VIP-150T User’s Manual

mode. (**)

6. Press ç or è to enter configuration mode then press OK button to enter sub menus; press C can jump out current menu to previous level.

PSTN 10:10:10 AM

1. Call List (**)

2. Forward Type

3. Phone Book

4. Ringer Settings

5. Network

6. Advanced Settings (protected by password)

7. Reboot

VIP-150T

2.2 LCD Menu Configuration

User can set the following configurations by LCD keypad.

Note:

1. Call List (**)

If there is an unanswered IP call, it will be kept in message box. MESSAGE LED will be flashing until user press MESSAGE to check miss call and re-press MESSAGE to return to main screen.

1. Press TRANSFER before input data can switch characters to be capital or lowercase.

2. Press SPEED before input data can switch input mode as character mode or IP mode; for example, user wants to enter IP address, after pressing SPEED can enter digits directly.

3. When user is inputting data, press C will jump out to menu list, press ç will clear previous input data.

(1) Missed Calls：to see all missed calls in message box. (2) Received Calls：to see all received calls in message box. (3) Dialed calls: to see all dialed calls in message box.

PLANET VIP-150T User’s Manual

2. Forward Type (**)

There are 3 selections in Forward type, user must select under which condition to forward calls.

(1) Busy

When VIP-150T is in busy status, the incoming call will be forwarded to the assigned phone number.

A. Activate

Enter a forwarded phone number to activate busy forward function.

B. Deactivate

Deactivate Busy Forward function.

(2) No Response

When VIP-150T hasn’t been picked up for around 10 seconds, the incoming call will be forwarded to the assigned phone number.

A. Activate

Enter a forwarded phone number to activate no response forward function.

B. Deactivate

Deactivate No Response Forward function.

(3) Unconditional

It is included the above two types. Whether the VIP-150T is in which status, calls will be automatically forwarded to the assigned phone number.

A. Activate

Enter a forwarded phone number to activate Unconditional Forward function.

B. Deactivate

Deactivate Unconditional Forward function.

3. Phone Book

1. List

List all records of name, telephone number, and IP address in the phone address book.

2. Edit/Delete

Edit or delete a record of name, telephone number, and IP address of the phone address book.

3. New

PLANET VIP-150T User’s Manual

Add a new record of name, telephone number, and IP address of the phone address book.

4. Ringer Settings

1. Volume

User can adjust ring volume by press ç or è on the keypad to decrease or increase ringer volume.

2. Style There are three tone styles for VIP-150T. Move the “>” symbol by press ç or è on the keypad to select the tone style preferred, then press OK to confirm it.

5. Network

1. Information

User can press ç or è to check current network status:

(1) Mode: Display current network connection mode of VIP-150T to be

Static (Fixed IP), DHCP, or PPPoE.

(2) IP, Mask, Gateway: display current IP information.

2. Network Mode

Set network mode of VIP-150T to be Static (Fixed IP), DHCP, or PPPoE.

3. IP address

Set IP address of VIP-150T.

4. Subnet Mask: Set subnet mask address of VIP-150T.

5. Default Gateway

Set default gateway address of VIP-150T.

6. Domain Name Server

Set IP address of Domain Name Server. Once VIP-150T can connect to DNS server, user can set URL address for Proxy server or Phone book instead of IP address.

7. PPPoE Configuration (1) User Name

Set PPPoE connection authentication user name.

(2) Password

Set PPPoE connection authentication password.

PLANET VIP-150T User’s Manual

If user forget password, please contact with your distributor, we will

generate a specific password according to your MAC address of

150T via Telnet or Web browser with

(3) Auto Re-connect

Choose ON or OFF to enable or disable this function. If user enables this function, after PPPoE disconnected, VIP-150T will automatically reboot to re-connect, and after reboot, if VIP-150T still can’t connect with server, VIP-150T will keep trying to connect. On the other hand, if user disables this function, VIP-150T won’t reboot and keep trying to connect.

8. SNTP Configuration (1) SNTP Mode:

User can set SNTP function to be on or off, which means VIP-150T will capture current time from SNTP server or not.

(2) SNTP Server:

User can specify a SNTP server for VIP-150T to capture current time.

(3) Time Zone:

User can set time zone via pressing ç or è according to the location VIP-150T is. For example, in Taiwan the time zone should be set as GMT+8:00.

9. Behind IP-Sharing

(1) If VIP-150T is behind IP sharing or NAT device, on IP sharing must

enable “DMZ” function or set “Virtual Server” to open ports (UDP port: 5060 and 16384).

(2) User must enter public IP address of IP sharing.

6. Advanced Settings (protected by password)

l Please Enter Password: (**)

User must key in password to enter this menu, selections under this command are all important ones, which can only be configured by advanced users.

1. Default Password to enter is empty, please press OK to enter sub-menus.

Note:

1. SIP Settings

PLANET VIP-150T User’s Manual

VIP-150T.

3. User can also try to configure VIPdefault IP address: 192.168.0.1

(1) Connect Mode

Select SIP connection mode to be peer-to-peer mode or Proxy mode.

(2) Proxy

A. Proxy

Set Proxy IP address or Domain Name.

B. Outbound proxy

Set Outbound Proxy IP address or Domain Name.

C. Proxy port

Set Proxy port for VIP-150T to send messages.

D. Expire (in seconds)

Set expire time of registration, in the duration of 2/3 expire time, VIP-150T will re-register to Proxy Server again.

(3) User Info

A. User Name

Set User Name of VIP-150T to register to Proxy Server. If Proxy server doesn’t request specific User name, please enter Line number here.

B. Line Number

Set Line Number of VIP-150T to register to Proxy Server.

C. Password

Set User Password of VIP-150T to register to Proxy Server. This configuration is not necessary, if Proxy server doesn’t request client to set password, user only has to set User Name the same as Line Number.

2. Firmware Update (1) Download method

There are two methods to download new version file, please move the “>“ symbol by press ç or è on the keypad to select TFTP or FTP method, then press OK to confirm it.

(2) FTP/TFTP Sever

User has to offer one TFTP/FTP server IP Address and set this IP Address via keypad. The IP Address is necessary for upgrading VIP-150T new application rom file.

(3) Set FTP user account (**)

User has to input user name and password for FTP server login .It is necessary for upgrading VIP-150T new application rom file via FTP method.

(4) File Name

User has to press the file name of new application rom file prepared for upgrading

PLANET VIP-150T User’s Manual

+ 34 hidden pages