4-Port Ethernet over VDSL2 Bridge
port and the whole system can be watched via the rich diagnostic LEDs
on the front panel. There are two selectable models of the VC-204,
one is used at client side (CPE) and the other one is at central side
(CO). The CPE or CO mode can be adjusted by using a built-in DIP
switch. For point-to-point connection, a CPE mode VC-204 and a CO
mode VC-204 must be setup as one pair of converters to perform the
connection.
Provides Superior Upstream and Downstream Transmission
The VC-204 also defines asymmetric (Plan 998) and symmetric (Plan
997) band plans for the transmission of upstream and downstream
High Performance Ethernet over VDSL Solution
The PLANET VC-204 is an Ethernet-over-VDSL2 product with high
performance. It is based on two core networking technology, Ethernet
and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2
technology offers the absolutely fastest data transmission speeds over
existing copper telephone lines without the need of rewiring. The VC-204
supports ultra-high performance to the pervasive telephone line network
with up to 100/55Mbps asymmetric data rate within 200m and 25/4Mbps
for 1.6km long range connections.
signals. The featured band plan 997 provides the symmetric
transmission on both downstream and upstream. On the other hand,
the band plan 998 performs higher transmission quality in short range
for central side (CO) in asymmetric mode. In all, when the VC-204
is in symmetric mode, it provides better upstream performance, and
when the VC-204 is in asymmetric mode, it gives better downstream
performance.
Key Features
VC-204
Implements with Existing Telephone Copper Wires
The VC-204 is also a Long Reach Ethernet (LRE) converter provides four
RJ-45 Ethernet ports and two RJ-11 phone jacks, in which one is for VDSL
connection and the other one is for POTS (Plain Old Telephone Service)
connection. The VC-204 has built-in POTS splitter to share the existing
phone line with POTS, therefore it is no need of replacing the existing
copper wiring. Just plug the VC-204 into the existing RJ-11 telephone
jack and a high-performance VDSL2 network can be connected. It is ideal
for use as an Ethernet extender to an existing Ethernet network.
Delivers High-Demand Services Connectivity for ISP / Triple Play
Devices
The VC-204 provides excellent bandwidth to satisfy the triple play devices
for home entertainment and communication. With the capability of
100/55Mbps symmetric data transmission, the VC-204 enables many
Multi-Media services to work on local Internet, such as VOD (Video
on Demand), Voice over IP, Video phone, IPTV, Internet caching server,
distance education, and so on.
Easy Installation
The Converter is plug-and-play design and fully compatible with all kinds
of network protocols. Moreover, the operating status of each individual
Cost-effective VDSL2 CO / CPE bridge solution •
One box design, CO / CPE selectable via DIP Switch •
Defines asymmetric (Plan 998) and symmetric (Plan 997) band •
plans for the transmission of upstream and downstream signals
Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x •
standards
DMT (Discrete Multi-Tone) line coding •
Half duplex Back pressure and IEEE 802.3x Full Duplex Pause •
frame flow control
Built-in POTS splitter to share voice and data•
Two RJ-11 connectors for each VDSL port, one for VDSL •
connection and one for POTS connection
Voice and data communication can be shared simultaneously •
based on the existing telephone wire
Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag •
transparent
VDSL2 stand-alone transceiver for simple bridge modem •
application
Advantage of minimum installation time (Simply as Plug-and-•
Play)
Selectable target band plan and target SNR margin •
Supports extensive LED indicators for network diagnostics •
Data Sheet
1
Applications
HOTEL
VC-201A/CO
FTT Hotel
Telephone Wire
1.6 km
VDSL2
VDSL2
100Base-TX UTP
1000Base-T UTP
Telephone wire
IPTV
IP Phone
PC
NB
VC-204/CPE
VDSL2
Phone
Telephone Wire
1.6 km
VDSL2
Switch
Room 1001
IPTV
IP Phone
PC
NB
Phone
Room 1002
VC-204/CPE
Ethernet Distance Extension
Two VC-204 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper
wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/55Mbps. Telephone service can still be used while
the modems are in operation. The two solutions listed below are typical applications for the Ethernet over VDSL converter.
MTU / MDU / Hospitality Solution
The VC-204 is a perfect solution to quickly provide cost-effective yet high speed network services to multi-unit buildings such as residential buildings
(multi-dwelling units) , commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network
installation is straightforward and requires no new wiring. With up to 100/55Mbps transmission, Video on Demand, IP telephony and various
broadband services can be easily provisioned.
Last Mile of FTTx deployment
The VC-204 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth
VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers´ home.
The 10/100Mbps port of VC-204 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is
excellent for phone line network built by Internet because every room or house could use the existing phone line to transmit data through the
Internet and the whole building could share the Internet to the wider area network with minimum cost.
VC-204
2
Data Sheet
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: sales@planet.com.tw www.planet.com.tw
VoIP Gateway: vip.planet.com.tw
PLANET reserves the right to change specications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2008 PLANET Technology Corp. All rights reserved.