FCC Information
The Federal Communication Commission Radio Frequency Interference
Statement includes the following paragraph:
This equipment has been tested and found to comply with the limits for a Class
B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
♦ Reorient or relocate the receiving antenna.
♦ Increase the separation between the equipment and receiver.
♦ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
♦ Consult the dealer or an experienced radio / TV technician for help.
The user should not modify or change this equipment without written approval
from company name. Modification could void authority to use this equipment.
For the safety reason, people should not work in a situation which RF
Exposure limits be exceeded. To prevent the situation happening, people who
work with the antenna should be aware of the following rules:
1. Install the antenna in a location where a distance of 6.5 cm from the
antenna may be maintained.
2. While installing the antenna in the location, please do not turn on the
power of wireless card.
3. While the device is working, please do not contact the antenna.
Copyright
Copyright © 1999 Planet Technology Corp., all rights reserved. No part
of this publication may be reproduced, adapted, stored in a retrieval
system, translated into any language, or transmitted in any form or by
any means without the written permission of Planet Technology Corp.
Trademarks
Planet is trademark of Planet Technology Corp., all other trademarks
throughout this manual are the property of their respective companies.
Limited Warranty
In no event will Planet be liable for any damage, including loss of data
or profits, cost of cover, or other incidental, consequential or indirect
damages arising from the installation, maintenance, use, performance,
failure or interruption of Planet’s products, whatever caused and on any
theory of liability. This limitation will apply even if Planet has been
advised of the possibility of such damage.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to
take adequate measures.
About This Manual
USB Data Link Installation Guide is published by Planet Technology
Corp. in 1999. This Revision is issued in Oct. 1999.
Revision
USB Data Link UL-101 User’s Guide
Part No.: EMQ-UL101