Copyright PLANET Technology Corp. 2002.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and
representation, either implied or expressed, with respect to the quality,
performance, merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any inaccuracies or omissions that
may have occurred.
Information in this User’s Manual is subject to change without notice and
does not represent a commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in
this User’s Manual. PLANET makes no commitment to update or keep
current the information in this User’s Manual, and reserves the right to
make improvements to this User’s Manual and/or to the products described in this User’s Manual, at any time without notice. If you find information in this manual that is incorrect, misleading, or incomplete, we
would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this
user’s guide, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
CE Mark Warning
In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
Congratulations on your purchasing of SW-501/SW-801, 5/8-port
10/100Mbps Fast Ethernet Switch. This device integrates 100Mbps Fast
Ethernet and 10Mbps Ethernet network capabilities in a highly flexible
desktop package.
Purpose
This manual discusses how to install your SW-501/SW-801, 5/8-port
10/100Mbps Fast Ethernet Switch.
Terms/Usage
In this manual, the term “
5/8-port 10/100Mbps Ethernet Switch, and "
case) refers to other Ethernet switches.
This guide provides the information you need to install and configure the
following models of the Switch:
5-port 10/100Mbps Ethernet Switch. SW-501
8-port 10/100Mbps Ethernet Switch. SW-801
" (first letter upper case) refers to your
Switch
" (first letter lower
switch
Overview of this User’s Manual
Chapter 1, Introduction. Describes the Switch and its features.
Chapter 2, Unpacking and Setup
basic installation of the Switch.
Chapter 3, Identifying External Components
panel rear panel and LED indicators of the Switch.
Chapter 4, Connecting The Switch
the Switch to your Ethernet network.
Chapter 5, Technical Specifications
physical and environmental and performance) specifications of the Switch.
Appendix A, RJ-45 Pin Specification
tacle/connector and the straight and crossover cable
connector.
Appendix B, Switch Operation
details.
. Helps you get started with the
. Describes the front
. Tells how you can connect
. Lists the technical (general
. Describes the RJ-45 recep-
. Describes how the switch work in
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.