Copyright (C) 2005 PLANET Technology Corp. All rights reserved.
The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s
Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware,
software, and documentation are copyrighted.
No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium
or machine-readable form by any means by electronic or mechanical. Including photocopying, recordin g, or information
storage and retrieval systems, for any purpose other than the purchaser's personal use, and without the prior ex press
written permission of PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and
makes no warranty and representation, either implied or expressed, with respect to the quality, performance,
merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.
Information in this User’s Manual is subject to change without notice and does not represent a commitment on the part of
PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual. PLANET
makes no commitment to update or keep current the information in this User’s Manual, and reserves the right to make
improvements to this User’s Manual and/or to the products described in this User’s Manual, at any time without notice.
If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments
and suggestions.
CE mark Warning
The is a class B device, In a domestic environment, this product may cause radio interference, in which case the user
may be required to take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and human health as a result of the presence of hazardous
substances in electrical and electronic equipment, end users of electrical and electronic e quipment should
understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted
municipal waste and have to collect such WEEE separately.
Trademarks
The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and
software products by their trade names. In most, if not all cases, their respective companies claim these designations as
trademarks or registered trademarks.
Revision
User’s Manual for PLANET Personal VoIP Gateway
Model: SKG-300
Rev: 1.0 (November 2005)
Part No.
Thank you for purchasing SKG-300 Personal VoIP Gateway.
PLANET provides several types of Skype solution to meet various demands. As illustrated, customers can
use any home phone for both Internet-based and standard telephony, without the need for special phone,
headsets or microphones. Following the wizard to install software, customers can easily dial up or receive
Skype or PSTN calls from one handset; through a simple setting of Call forward feature, customers can
receive any incoming call wherever even away home.
SKG-300 Features
• Auto detection and switching of incoming PSTN or Skype calls
• RJ-11 phone port to POTS phone, RJ-11 line port to PSTN
• One handset for both PSTN and Internet calls
• No need for microphone and speaker to make Skype call
• Three-Way conference calling between PSTN and Skype calls
• Supports to forward incoming PSTN call to Skype, and forward incoming Skype call to PSTN
• Call waiting
• Voice recording by manually or automatically
• Full-duplex and echo-free sound quality
Package contents
¾ SKG-300 Base x 1
¾ USB cable x 1
¾ Telephone line (RJ-11) x 1
4
¾ Quick Installation Guide
¾ CD-ROM with User’s Manual, Driver and Utility
System requirements
Minimum System Requirements:
¾ Microsoft Windows 2000/XP
¾ Pentium 400MHz CPU or equivalent
¾ 128MB RAM
¾ 10MB free Disk Space
¾ CD-ROM drive
¾ Internet connection (any broadband: ADSL or Cable )
¾ Standard telephone landline subscription (PSTN)
¾ Skype™ version 1.3 or higher must be installed
5
2.1 Hardware Details
LED Display
Chapter 2 SKG-300 Setup
LED Indicators Descriptions
LINK
PSTN
VoIP
Steady on indicates SKG-300 has correctly connected to the USB port of
your PC
Steady on indicates SKG-300 is communicating with PSTN line, or wait for
calling at standby mode
Steady on indicates SKG-3 00 is communicating with VoIP line
Port Connection
6
Port Descriptions
Line
Phone
USB
For connecting to PSTN line
For connecting to a phone set
For connecting to a computer or laptop
2.2 SKG-300 utility setup
"Note:
The following instructions will guide you to through the process of installing the PLANET Personal VoIP
Gateway SKG-300.
The installation procedure is to:
• Install Skype™ (step 1 below)
• Start the SKG-300 SW installation (step 2 below)
• Plug in the SKG-300 adapter WHEN INSTRUCTED TO DO SO (step 2 below)
• Verify the installation is OK (step 3 below)
Do not connect the SKG-300 adapter to your computer until instructed to do so
by the installation wizard.
• Connect a telephone handset to the SKG-300 adapter (step 4 below)
• Connect the SKG-300 adapter to the wall jack (step 5 below). Note that this is optional and only
required for the forwarding and conferencing features.
•Use your SKG-300 adapter to make and receive Skype™ calls
The detailed instructions follow:
STEP 1: If Skype™ is not already installed on your computer, visit http://www.skype.com and follow the
instructions there to install Skype™. Verify that Skype™ is working before installing the SKG-300 adapter.
STEP 2: Insert the supplied CD-ROM into your PC CD-ROM drive. The installation should start
automatically . If not, open the inst allation folder on the CD-ROM and double cli ck on the setup.exe program.
You will see the following popup. Press Yes to proceed or No to cancel.
7
Then you will see the End User License Agreement. Click the “I have read …” checkbox and press the I
Agree button as shown below.
Wait until you see the following popup and pres s the OK button.
Connect the USB cable to the SKG-300 adapter USB port as shown below:
The other end of the USB cable must be connected to a USB port on your computer as shown below, or to
an AC Powered USB hub.
8
"Note: The SKG-300 Adapter MUST not be connected to a bus powered USB hub.
You will see the following Windows New Hardware Found Wizard.
Select Install from a list or specific location (Advanced) and press the Next button, input the installation
program location and press Next button.
The installation will continue and you will see the following screen.
9
When you see the following screen, press the Finish button.
Then you will see the following Windows New Hardware Found Wizard scree n.
Select Install from a list or specific location (Advanced) and press the Next button, input the installation
program location and press Next button.
The installation will continue and you will see the following screen.
10
When you see the following screen, press the Continue Anyway button.
When you will see the following screen, select the option, “allow this program to use Skype” and press the
OK button.
11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.