Planet Technology ICA-525 User Manual
20 Meter IR Vandal Proof Dome
Internet Camera
ICA-525
Quick Installation Guide
Table of Contents
Before Installation ............................................................................................ 3
System Requirements ..................................................................................... 3
Package Content .............................................................................................. 4
Identication of Cables ..................................................................................... 5
Inside the TEL box: ......................................................................................... 6
Hardware Installation ....................................................................................... 7
Initial Utility Installation and operation..............................................................10
Wizard function: .............................................................................................13
Username and Password: ...............................................................................14
Congure Utility Installation .............................................................................15
Appendix A: Feature Listing for Cam Viewer ....................................................19
Appendix B: Suggest Hardware / System Requirement ......................................20
Ordering Information for Cam Viewer Pro .........................................................20
Further Conguration ......................................................................................20
Thank you for purchasing the ICA-525. It is versatile and high image solution
of surveillance application for day and night. The ICA-525 is also a stand-alone
camera system with a built-in processor and web server that provides highest
quality video and system performance.
Before Installation
Before installation, please be sure to read this quick installation guide or user’s
manual of bundle CD carefully to complete machine installation.
System Requirements
Network
Interface
Monitoring
System
System
Hardware
10/100M Base-TX Ethernet
Recommended for Internet Explorer 6.0 or later
● CPU: Pentium 4, 1.5GHz or above
● Memory Size : 512 MB (512 MB or above Recommended)
● VGA card resolution : 1024 x 768 or above
● Sound Card : Necessary
● Network bandwidth: In VGA resolution mode, mini-
mum upload bandwidth is 1Mbps
3
Package Content
Note
ICA-525 x 1
Power Adapter x 1
Screws x 4
Telephone box x 1
L-Wrench x 1
CD Disk x 1
Quick Installation Guide x 1
1. If any of the above items are missing, please contact your dealer
immediately.
2. Using a power supply with a different voltage that the one
included with the ICA-525 will cause damage and void the
warranty for ICA-525.
4
Identication of Cables
Note
RJ-45 LAN Video out Line in
RS-485 & DI/DO 12V DC in Line out
(Connect to a bundled TEL box)
1. RJ45 LAN socket:
Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built N-Way
protocol can detect or negotiate the transmission speed of the network auto-
matically. Please use Category 5 “straight through” cable to connect the ICA-525
to a 100Mbps Fast Ethernet network switch or hub.
In case you need to connect the device to PC or notebook directly,
you should use cross over cable instead.
Connect to PC or Hub/Switch. For connect to 10Base-T
5
2. RS-485 & DI/DO: Connect to a local keyboard controller and connect to sensor
Note
in and alarm out devices.
Inside the TEL box:
Name Function
12VDC DC 12V output (50mA maximum)
GND GND
D+ RS485 data +
D- RS485 data -
DI Digital signal input
DO Digital signal output
The RS-485 of ICA-525 is master that can control external scanner.
Local Video output (BNC port): The Network Camera also provides composite
3.
video output. User can use BNC video cable to connect the Network Camera with
a TV monitor or VCR.
DC-in Jack: The input power is 12VDC. Note that supply the power to the
4.
Network Camera with standard power adapter included in package. Otherwise,
the improper power adapter may damage the unit and result in danger.
Line in (audio in): Connect an audio input source to the ICA-525.
5.
Line out (audio out): Connect a loud speaker to the ICA-525. This function is
6.
for voice alerting and two-way audio.
6
Loading...