Planet Technology GSD-804, GSD-503, GSD-504, GSD-803 User Manual

10/100/1000Mbps

Gigabit Ethernet Switch

GSD-503/GSD-504
GSD-803/GSD-804

User's Manual

Trademarks

Copyright © PLANET Technology Corp. 2005.
Content subjects to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will
work properly in all environments and applications, and makes
no warranty and representation, either implied or expressed,
with respect to the quality, performance, merchantability, or
fitness for a particular purpose.

PLANET has made every effort to ensure that this User's
Manual is accurate; PLANET disclaims liability for any
inaccuracies or omissions that may have occurred.

Information in this User's Manual is subject to change without
notice and does not represent a commitment on the part of
PLANET. PLANET assumes no responsibility for any
inaccuracies that may be contained in this User's Manual.
PLANET makes no commitment to update or keep current the
information in this User's Manual, and reserves the right to
make improvements to this User's Manual and/or to the
products described in this User's Manual, at any time without
notice.

If you find information in this manual that is incorrect, misleading,
or incomplete, we would appreciate your comments and
suggestions.

FCC Warning

This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the Instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at its own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.

Revision

PLANET Gigabit Ethernet Switch User's Manual

FOR MODELS: GSD-503/GSD-504/GSD-803/GSD-804

Rev: 1.0(May.2005)

Part No.: 2010-A33110-000

1. INTRODUCTION

1.1 Package Contents

Check the contents of your package for following parts:

。 Gigabit Ethernet Switch x1
。 User's manual x1
。 Power adapter x1

If any of these are missing or damaged, please contact your dealer
immediately, if possible, retain the carton including the original
packing material, and use them against to repack the product in case
there is a need to return it to us for repair.

1.2 How to Use This Manual

This Gigabit Ethernet Switch User Manual is structured as
follows:

Chapter 2 Installation

The chapter explains the feature, functionality and the physical
installation of the Switch.

Chapter 3 Switch operation
The chapter explains the Gigabit Ethernet Switch transmit operation.

Chapter 4 Troubleshooting
The chapter explains the troubleshooting of the Gigabit Ethernet
Switch.

Appendix A

This chapter contains cable information of the Gigabit Ethernet
Switch.

1.3 Product Features

。 Complies with IEEE802.3, 10Base-T, IEEE802.3u,

100Base-TX and IEEE802.3ab, 1000Base-T

。 IEE802.3x, full-duplex flow control compliant; back-pressure,

half-duplex flow control

。 10/100/1000Mbps 5/8-port Gigabit Switch (RJ-45)

。 8K MAC address table auto-ageing,

112K(GSD-503/GSD-504) / 144K(GSD-803/GSD-804) bytes
packet buffer

。 9.6K Jumbo packet size support

。 Per port Auto-MDI, MDI-X detection

。 Non-blocking, Store and Forward switching architecture

。 Automatic source address learning and aging

1.4 Product Specifications

Model GSD-503/GSD-504 GSD-803/GSD-804

Hardware Specification

Network Ports 5 10/100/1000Base-T

RJ-45 MDI/MDI-X ports
155 x 86 x 26 mm (503) 155 x 86 x 26 mm (803) Dimensions (W x D x H)

170 x 87 x 32mm (504) 170 x 87 x 32 mm (804)
Weight (KG) 0.42(503) 0.22(504) 0.43(803) 0.24(804)
Power Requirement External Power adapter 12V 1A

8 10/100/1000Base-T
RJ-45 MDI/MDI-X ports

Switch Specification

Switch Architecture Store-and-forward
Address Table 8K entries, auto learning/ageing
Shared Data Buffer 112K bytes 144KB
Flow Control IEEE 802.3x full duplex operating and flow control
Packet Control Runt & CRC filtering, Broadcast storm control
Switch Fabric 10Gbps 16Gbps

Standard Conformance

Network Standards IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet)

IEEE 802.3ab (Gigabit Ethernet) and IEEE802.3x

(flow control)
Operation Temperature

Humidity
Regulation Compliance FCC, CE

0~50

ºC

10% to 90% (Non-condensing)

ºC

-40~70