Planet Technology GSD-800, GSD-1600 User Manual

Trademarks

Copyright  PLANET Technology Corp. 2005.

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other trade­marks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representa­tion, either implied or expressed, with respect to the quality, performance,
merchantability, or tness for a particular purpose.

PLANET has made every effort to ensure that this User’s Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.

Information in this User’s Manual is subject to change without notice and does
not represent a commitment on the part of PLANET. PLANET assumes no re­sponsibility for any inaccuracies that may be contained in this User’s Manual.
PLANET makes no commitment to update or keep current the information
in this User’s Manual, and reserves the right to make improvements to this
User’s Manual and/or to the products described in this User’s Manual, at any
time without notice.

If you nd information in this manual that is incorrect, misleading, or incom­plete, we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen­erates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the Instruction manual, may cause harmful interfer­ence to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.

Revision

PLANET Gigabit Ethernet Switch User’s Manual

FOR MODELS: GSD-800/GSD-1600

Rev: 1.0 (July. 2005)

Part No.: 2010-A35030-000

Table of Contents

Chapter 1 INTRODUCTION 1

1.1 PACKAGE CONTENTS 1

1.2 HOW TO USE THIS MANUAL 1

1.3 PRODUCT FEATURES 2

1.4 PRODUCT SPECIFICATIONS 2

Chapter 2 INSTALLATION 3

2.1 PRODUCT DESCRIPTION 3

2.1.1 Product Overview 3

2.1.2 GSD-800/GSD-1600 Front Panel 3

2.1.3 LED Indicators 4

2.1.4 GSD-800/GSD-1600 Rear Panel 4

2.2 INSTALLING A GSD-800/GSD-1600 5

2.2.1 Desktop Installation 5

Chapter 3 SWITCH OPERATION 7

3.1 ADDRESS TABLE 7

3.2 LEARNING 7

3.3 FORWARDING & FILTERING 7

3.4 STORE-AND-FORWARD 7

3.5 AUTO-NEGOTIATION 8

Chapter 4 TROUBLESHOOTING 9

Appendix A 11

A.1 1000MBPS, 1000BASE-T 11

A.2 10/100MBPS, 10/100BASE-TX 11

Chapter 1

INTRODUCTION

1.1 Package Contents

Check the contents of your package for following parts:

● Gigabit Ethernet Switch x1

● User’s manual x1

● Power cord x1

If any of these are missing or damaged, please contact your dealer immediately, if
possible, retain the carton including the original packing material, and use them against
to repack the product in case there is a need to return it to us for repair.

1.2 How to Use This Manual

This Gigabit Ethernet Switch User Manual is structured as follows:

● Section 2, Installation

It explains the functions of GSD-800/GSD-1600 and how to physically in­stall the GSD-800/GSD-1600.

● Section 3, Switch operation

It explains the switch operation of GSD-800/GSD-1600.

● Section 4 Troubleshooting

It contains troubleshooting of GSD-800/GSD-1600.

● Appendix A Switch’s RJ-45 Pin Assignments

It contains cable information of GSD-800/GSD-1600.

1.3 Product Features

• Comply with IEEE802.3, 10Base-T, IEEE802.3u, 100Base-TX and IEEE802.3ab,

1000Base-T

• IEEE802.3x, full-duplex flow control compliant; back-pressure, half-duplex

flow control

• 10/100/1000Mbps 8/16-Port Gigabit Ethernet Switch (RJ-45)

• 144/272KB packet buffer and 8K MAC address table, auto-ageing

• Support 9K jumbo packet

• Per port Auto-MDI / MDI-X detection

1

3

• Non-blocking, Store and Forward switching architecture

• Automatic source address learning and aging

• 10”, 1U height rack mounting size

• 100~240VAC, 50~60Hz, 0.5A universal power input

1.4 Product Specications

Model GSD-800 GSD-1600

Hardware Specification

10/100/1000 ports 8 16

Dimensions 217 x 135 x 43.5 mm (1U height)

Weight 0.95kg 1.7 kg

Power Requirement 100~240 (±10%) VAC, 50-60 (±3) Hz

Power Requirement 7.5 watts & 25 BTU/hr 16.8 watts & 57 BTU/hr

Switch Specification

Switch architecture Store-and forward

Address Table 8K entries, auto learning/ageing

Shared data Buffer 144 KB packet buffer, 272KB packet buffer

Flow Control Back pressure for half duplex, IEEE 802.3x for full

duplex

Packet Control Runt & CRC filtering, Broadcast storm control

Switching Fabric 16Gbps 32Gbps

Switch Throughput 11.9Mbps 23.8Mbps

Standards Conformance

Network Standards IEEE802.3 (Ethernet),

IEEE802.3u (Fast Ethernet)

IEEE802.3ab (Gigabit Ethernet)

IEEE802.3x (Flow control)

Operating Temperature

Storage Temperature

Humidity 10% to 90% (Non-condensing)

Regulation Compliance FCC, CE

0~50ºC

-40~70ºC

2

Chapter 2

INSTALLATION

This section describes the functionalities of GSD-800/GSD-1600’s components and guides
how to install it on the desktop or shelf. Basic knowledge of networking is assumed. Please
read this chapter completely before continuing.

2.1 Product Description

The PLANET GSD-800/GSD-1600 provides 8/16 Gigabit Ethernet Switch ports. The
PLANET GSD-800/GSD-1600 delivers eight/sixteen ports worth of high-performance,
feature-rich integrated Gigabit Ethernet switching over traditional copper cabling. Each
port supports 10Mbps, 100Mbps, and 1000Mbps as well as half/full mode and can be
easily connected to corporate backbones and servers.

2.1.1 Product Overview

PLANET GSD-800/GSD-1600 is a gigabit Ethernet switch with 8/16 RJ-45 10/100/
1000Mbps ports for high-speed network connectivity. The GSD-800/GSD-1600 can also
automatically identify and deter-mine the correct transmission speed and half/full duplex
mode of the attached devices with its 8/16 ports. The Gigabit ports with 9K jumbo packet
support can handle large amounts of data transmission in a secure topology linking to a
backbone or high-power servers.

The GSD-800/GSD-1600 also supports store-and-forward forwarding scheme to ensure
low latency and high data integrity, eliminates unnecessary trafc and relieves congestion
on critical network paths. With an intelligent address recognition algorithm, GSD-800/
GSD-1600 could recognize up to 8K different MAC address and enables ltering and
forwarding at full wire speed.

2.1.2 GSD-800/GSD-1600 Front Panel

Figure 2-1 & 2-2 shows a front panel of GSD-800/GSD-1600.

Figure 2-1 PLANET GSD-800 Front Panel

Figure 2-2 PLANET GSD-1600 Front Panel

3